Xcube X-501 SR User manual
INSTRUCTION MANUAL
INSTRUCTION MANUAL 4
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ 25
X-501 SR
portable multimedia player
501IM.indd 1 30.03.2007 12:26:51
2
501IM.indd 2 30.03.2007 12:26:51
501IM.indd 3 30.03.2007 12:26:52
English
4
Instruction Manual
Portable Multimedia
player X-501SR
Copyright / Trademark
Thanks for your purchasing XCube
X-501SR.
We’re very sure that X-501SR would
sufficiently satisfy you and make
your life more exciting.
This manual will help you safely to
use the product.
Please be sure to check this manual
carefully before the usage.
1. Copyright
XCube is the registered trademark of New
Media Entertainment (NME),Inc in USA.
= This is for home use only and
cannot be used for business
purpose.
= New Media
Entertainment(NME),Inc. has
all the rights of trademarks
and intellectual property of this
manual.
= It is prohibited to distribute this
manual in part or whole parts
illegally.
= All software, audio, video and
game which have an intellectual
property is protected by the
copyright.
= We recommend Users to
register our homepage, www.
xcubedigital.com, which
provides all information of
company, products and other
related technical information.
= All contents included in this
User Manual are subject to
change without any prior
notice for improving features
or according to changing
specification.
Chapter One
Introduction
1. Button, port and connection
Front side
1. Color TFT LCD screen
2. LEFT: Left selection (Single
press or long press on this
button for rewind)
. Equipment working state
indicator (red), battery charging
indicator (blue)
4. UP: Upward selection (A long
press on this button can turn
the volume up. In MP playing
state, a single press on this
button can select the previous
music)
501IM.indd 4 30.03.2007 12:26:52
English
5
5. OK: Enter button
6. RIGHT: Right selection (Single
press or long press on this
button for fast forward)
7. DOWN: Down selection (A
long press on this button can
turn the volume down. In MP
playing state, a single press on
this button can select the next
music)
8. BACK: Return button
9. MENU: Menu button
10. POWER: Press this button and
hold for seconds, PMP will be
turned on. Press this button and
hold for seconds and PMP will
be turned off
12. HOLD button: Used for button
lock control in main body of
PMP
1. Reset button: Used for reset
operation
Top side
14. MIC: Used in digital audio
recording
15. SD storing card slot
Left side
16. Earphone output port: Used for
output of stereo sound
17. USB 2.0 full speed port: Used
to connect PMP with digital
devices.
18. Line in port
2. Introduction to other acces-
sories:
AC adaptor
• Only special charger/adaptor
of XCube accessories shall be
used
• Prior to initial application, the
battery shall be charged for
more than four hours
Mode for PMP may select corre-
sponding cable.
1)When PMP is used as OTG Host
(digital mate): When PMP is used
as main device, USB_Host cable
connects PMP with digital devices
such as U-disc and digital camera.
Upon connection, data in digital de-
vices such as U-disc can be trans-
mitted to PMP flash disc.
Method of operation: Turn on PMP,
enter “Setup” menu through main
menu. Select “System”, and for USB
operation mode select “OTG Host”.
Move cursor to “Enter” button and
then press “OK” button on panel or
remote controller to enter setup.
Connect digital devices such as
501IM.indd 5 30.03.2007 12:26:52
English
6
PMP or U-disc with corresponding
USB port by USB_Host cable. Cor-
responding digital devices can be
identified in “File browsing” menu,
with the name of the file folder being
“usb-disk”. The default USB mode
of operation is OTG Host mode.
2) When PMP is used as card
reader: There is a built-in SD/MMC
card reader in PMP. PMP can be
used as an ordinary SD/MMC card
reader and data transmission be-
tween SD/MMC card inserted in
PMP and PC can be realized.
Method of operation: Turn on PMP,
enter “Setup” menu through main
menu. Select “System”, and for USB
operation mode select “OTG SD
Reader”. Dialogue box “Please in-
sert SD card” will pop up on screen.
Insert SD card as prompt. Move
cursor to “Enter” button, and then
press “OK” button on panel or re-
mote controller to enter setup. Con-
nect PMP with corresponding USB
port on PC by USB_Device cable.
SD card in PMP can be identified in
PC file management interface.
3) When PMP is used as remov-
able drive disc : When PMP is used
as the accessory device of PC,
USB_Device cable connects PMP
with PC. Upon connection, data
transmission between PMP and PC
can be realized.
Method of operation: Turn on PMP,
enter “Setup” menu through main
menu. Select “System”, press direc-
tional key < to select “USB MTD”.
Following instruction from screen,
connect USB_Device cable with port
on PMP. Upon connection, PMP
screen will prompt: “USB application
model, system is locked, remove
USB cable from PC to unlock”. Re-
movable drive disc icon will appear
on screen. When it is connected, it
can serve as removable drive disc. If
the operation system of PC is Mi-
crosoft Window 2000 or above, PMP
can be identified without the need
to install USB driver. For Microsoft
Windo98, USB driver shall be in-
stalled prior to operation.
Earphone:
Connect the audio frequency plug of
the earphone to the audio frequency
port on PMP, and you can enjoy high
definition stereo music.
3 .Connect USB cable for data
501IM.indd 6 30.03.2007 12:26:52
English
7
transmission
4.Turn on PMP
When the system is not turned on,
press POWER button and hold for
seconds, the red working state
indicator will be turned on. If the
battery is installed or AC adaptor is
connected, the operation system
will start up. First, you will see a still
start logo, and then will enter sys-
tem main interface.
At this moment, please wait pa-
tiently.
After pressing on POWER button
and hold for several seconds, if PMP
turns off, it indicates that the battery
power is low. In this case, connect
AC adaptor to start charging.
5.Turn off PMP
When the system is turned on, press
POWER button and hold for sec-
onds, and the system will be turned
off. Press POWER button again to
turn on PMP.
Power saving mode
When the system is under standby
state or under playing state without
any operation for certain period of
time, PMP will enter power-saving
mode. Users can set up power sav-
ing contents and time parameters.
In power supply menu “Setup →
“power supply”, there is a setup
column with power supply option
“Battery” or “AC”. For column of
“System idle”, the ex-factory setup
is minutes, indicating that PMP
will be turned off automatically after
being in the idle state for minutes.
The setup varies from 1 to 9 min-
utes, or “NEVER”.
In setup column of “Screen off”,
the ex-factory setup is 20 seconds,
indicating that backlighting of the
screen will be turned off automati-
cally without button touching for 20
seconds. Press any button and the
backlight will be turned on. The
setup varies from 10 seconds to 90
seconds, or “NEVER”.
6. Altering user interface lan-
guage
PMP user interface language set up
as Russian (default setup).
To alter interface language setup,
select “Setup” icon on screen by
using directional buttons and then
press “OK” button.
And then select “Display” icon on
screen by using directional buttons
501IM.indd 7 30.03.2007 12:26:52
English
8
and then press “OK” button.
Select “Language” column by using directional buttons, select the desired
language, move cursor to “Enter” icon and then press “OK” button.
7. Battery charging
Please use special charger/adaptor of XCube PMP. Using other charger or
adaptor may cause damage to PMP. When blue indicator is on, it indicates
that AC charger/adaptor is charging. When the battery is fully charged, the
blue indicator will be off. Fully charged battery can support 16 hours *MP
music playing or 5 hours *AVI/MPEG-4 video playing. (Built-in screen).
* Depending on your method of application (stop/start/recording etc.)
* To ensure safety, consecutive charging time shall not exceed 8 hours. Nor-
mal charging time shall be within 4-8 hours.
8. Maintenance
Avoid shock or impact.
Keep away from heat source, and maintain good ventilation.
Keep away from water source or highly humid area.
Keep away from intensive magnetic field.
Ensure good connection. Avoid damage caused by kid unplugging PMP.
Do not disassemble PMP by yourself. No component inside can be used by
user. Unauthorized disassembling will cause invalidation of warranty.
9. Software upgrading
a) Press UP and POWER button to restart and enter the UPGRADE
operation. Connect PMP with PC via USB cable. Icon of removable disc
will appear on screen. If no icon is found, try again.
b) Copy upgrading document (such as pmp.iamge.0712) to this removable
disc.
501IM.indd 8 30.03.2007 12:26:52
English
9
c) When the document is copied, find the disc icon in computer, right click
the icon and select “Jump” to remove the disc (PMP)
d) After the removable disc PMP is removed, PMP will still display device
on graphic. Do not unplug the USB cable and wait for approximately 10
seconds. Then the power indicator and the screen in PMP will become
dim and finally the device is turned off, indicating successful upgrading
of the system.
e) Through [Main menu -> Setup -> System], you can view information of
“Hardware version”, such as SEP 02 2005 17:05
501IM.indd 9 30.03.2007 12:26:52
English
10
Chapter 2. Product specifications
Main functions and specifications
= Memory: 2048 Mb
= Port type: USB 2.0 full speed,
SD Reader.
= Video playing format: Capable
of playing audio and video files
with the following formats:
MPEG-1/(DAT, MPEG), MPEG-
4/(AVI, DIVX-5.x, Xvid), ASF
and WMV. The breakthrough
about this product is RM/RMVB
format supporting.
= Flash programs: Movies of
*.SWF format can be played.
= Audio playing format:
Compatible with MP (0-
20Kbps), WMA, WAV
(PCM&ADPCM), supports lyrics
synchronizing for MP-ID.
= Audio recording format: Built-
in MIC independent recording
is capable of recording stereo
program of MP, WAV and
ADPCM format.
= Picture browser: Compatible
with formats JPEG, BMP, GIF
and PNG ( with pixels less than
2272X1742)
= Flash games
= Card reading function: Directly
compatible with SD/MMC
memory card, capable of
playing programs stored in
card.
= Text reader: With e-book
function, capable of browsing
files of *.TXT format in PMP
(with size smaller than M)
= Consecutive playing time: 16
hours for MP, and 4.5 hours
for video program (MPEG-4)
= Good compatibility for software
upgrading. Free upgrading
software can be downloaded
from our website
= LCD screen: 2.5 inch color TFT
LCD 20X240 pixels, 262K
color
= Rechargeable lithium battery
pack or external power supply
via adaptor, supporting
charging via external power
supply.
= Dimension: 101 mm X 66 mm X
1 mm
501IM.indd 10 30.03.2007 12:26:52
Table of contents
Languages:
Other Xcube Portable Multimedia Player manuals
