Wozart Universal IR User manual
Installation guide
Wozart Universal IR
Installation Guide Version 1.0
Updated on 26/08/2022
For configuration video, scan the QR code below
For iOS devices
For Andorid devices
2
Welcome
This Guide will walk you through the installation of Wozart Universal IR.
We hope you enjoy your purchase. We at Wozart have carefully crafted a reliable,
durable and secure Smart Home product. We promise to toil harder to build
awesome devices that make life simpler and planet more livable.
We hope our association continues and grows stronger with each passing day. You
are awesome for supporting the change we wish to bring in the way people live
As Wozart app is frequently updated, there may be changes to this manual.
Please refer to www.wozart.com/support for the latest version of the manual.
Download Wozart app from Google play store or App store.
Table of Contents
What’s in the box 4
Technical Specifications 5
Description 5
Setup Guide 7
Configuration 8
Learning AC Remote 9
Troubleshooting 14
Learning remote 13
Adding and Creating a remote 12
Warranty & Service 15
Precautions 6
What’s in the box
4
Warranty Card Setup Code Sticker
XXXX
XXXX
Adapter Micro USB Cable
Wozart Universal IR
Description
Technical Specifications
Wozart Universal IR is a smart device that is designed to control any IR powered
appliances. The Wozart Universal IR enables control using app interfaces, voice
assistants or a switch connected directly to it.
5
Power Supply 100-240 V ~ 50/60 Hz
5 A
USB Type B
0-40°C
0- 95 % RH without condensation
Wi-Fi 2.4 GHz 802.11
14 mm * 110 mm * 45 mm
60 Gms
WIR01
Rated load current
Power input type
Operating Temperature
Ambient Humidity
Communication Protocol
Weight
Model
Dimensions
(Height*Width*Depth)
6
Precautions
• The device is designed to run on AC voltage, faulty connection or use may
result in fire or electric shock.
• Do not handle the device with wet or moist hands.
• Do not modify or alter the device in any way not included in this manual.
• Do not use in damp or wet locations, near shower, swimming pool, sink, or
anywhere else where water or moisture are present.
110 mm
14 mm
45 mm
Setup Guide
7
• Switch off the main power supply
• Insert Type B connector into the power input port of the Wozart Universal IR.
• Plug in the adapter in the wall socket.
• Turn on the main power supply to the device and proceed with configuration
on the Wozart app.
• After the device is powered on, the red indictor light on the device will start slow
blinking indicating the device is available for configuration.
• If the light is not blinking, check the power connections and factory reset the
device as explained below:
Insert a pin in the pinhole on the back of the device. Press and hold the
Button for 20 seconds.
Configuration
Configure on Apple home:
• Factory reset the device
• A successful reset will result in a slow blinking red light.
• Open HomeKit app on your Apple device.
• Tap on Add Accessory
• Select IR from the available devices which
is ready to congifure
• Scan the QR code provided with
the Wozart Universal IR
Note: Do not change the IR device name during configuration.
8
• Head over to Wozart app on your Apple device.
• The device will sync automatically to Wozart app and be available with the
same name.
• Long press the device tile to open the device settings.
Tap on “Connect to Cloud” option.
• Enter the 8 digit setup code provided with the device and tap submit.
• After succesful connection you can see a remote
with the name “Thermo”
• Tap on “Thermo” and start learning the AC remote
2) Tap on ”Thermo” remote.
3) Long press on the “Power ON” button on Wozart app.
4) A pop-up appears, tap “Learn”.
1) Turn off your AC with the physical remote.
5) Point the physical AC remote at universal IR device as shown below
and press the power On/off button on the physical remote.
Learning AC remote:
Power ON:
06:05
AC REMOTE
Remote Wozart Universal IR
9
6) A pop-up appears with “Test” button when the Universal IR recognise the
button press of the physical remote.
7) Place the Universal IR in line of site with the AC that you are learning
and tap “Test”.
8) Another pop-up appears with two options:
“Not Worked” and “Confirm”.
9) If AC is powered on after tapping on “Test”, then tap “Confirm”.
10) If it doesn’t work, tap on “Not Worked” and repeat steps 1 to 9.
Power OFF:
12) Tap on ”Thermo” remote.
13) Long press on the “Power OFF” button on Wozart app.
14) A pop-up appears, tap “Learn”.
11) Turn on your AC with the physical remote.
15) Point your physical AC remote at Universal IR and press the power button
on the physical remote.
16) A pop-up appears with “Test” button when the Universal IR recognise the
button press of the physical remote.
17) Place the Universal IR in line of site with the AC that you are learning
and tap “Test”.
18) Another pop-up appears with two options:
“Not Worked” and “Confirm”.
19) If AC is powered off after tapping on “Test”, then tap “Confirm”.
20) If it doesn’t work tap on “Not Worked” and repeat steps 11 to 19.
10
Table of contents
