Woxcon SCU21E-CODEC User manual
SCU21E-CODEC
18G 2x1 Presentation Switcher with Soft
Codec and CEC
All Rights Reserved
Version: SCU21E-CODEC_2019V1.3
User Manual
18G 2x1 Presentation Switcher with Soft Codec and CEC
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till April,
2019. In the constant effort to improve the product, we reserve the right to make
functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
18G 2x1 Presentation Switcher with Soft Codec and CEC
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prev e n t f i re or shock hazard, d o n o t e x p o s e the unit to rai n , m o i s ture or install
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
18G 2x1 Presentation Switcher with Soft Codec and CEC
Table of Contents
1. Product Introduction .................................................................................................... 1
1.1 Features ............................................................................................................. 1
1.2 Package List ....................................................................................................... 2
2. Specification ................................................................................................................ 3
3. Panel Description ........................................................................................................ 5
3.1 Front Panel ......................................................................................................... 5
3.2 Rear Panel ......................................................................................................... 6
4. System Connection ..................................................................................................... 7
4.1 Usage Precaution ............................................................................................... 7
4.2 System Diagram ................................................................................................. 7
5. Button Control .............................................................................................................. 8
5.1 Manual Switching ............................................................................................... 8
5.2 Automatic Switching ........................................................................................... 8
5.3 Display Control ................................................................................................... 8
5.4 EDID Setting ....................................................................................................... 9
6. RS232 Control ........................................................................................................... 10
6.1 RS232 Control Software ................................................................................... 10
6.2 RS232 Command ............................................................................................. 12
6.2.1 Device Control ........................................................................................ 12
6.2.2 Source Switching ................................................................................... 12
6.2.3 User-defined EDID ................................................................................. 14
6.2.4 Switcher Baud Rate Setting ................................................................... 14
6.2.5 CEC/RS232 Function Setting ................................................................. 15
6.2.6 Display Control ....................................................................................... 16
6.2.7 Third-party Device Control ..................................................................... 17
7. Panel Drawing ........................................................................................................... 23
8. Troubleshooting & Maintenance ................................................................................ 24
9. Customer Service ...................................................................................................... 25
18G 2x1 Presentation Switcher with Soft Codec and CEC
1
1. Product Introduction
Thanks for choosing the HDMI 2.0 2x1 Presentation Switcher. The switcher is designed
to switch HDMI input or USB-C input to one HDMI output. It supports video resolution
up to 4Kx2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is smart built-in EDID
setting can be selected by the 4-pin DIP switch on the front panel.
The switcher supports stereo and multichannel audio on the HDMI inputs. In addition to
the audio embedded in the HDMI output stream, the audio is simultaneously de-
embedded to a balanced analog audio output. It also supports device extension by
providing one type-B USB port for host connection, and two type-A USB ports for HID
devices such as camera, microphone, keyboard etc.
The switcher features multiple methods of control. When in the AUTO mode, the
switcher will automatically switch to the first detected source device. When the active
source is removed, the switcher will switch to the lowest numbered input. The switcher
can be manually controlled by the front panel buttons and RS232 command. CEC
allows the display device can be controlled by the front panel buttons and RS232 CEC
commands.
1.1 Features
l 18G 2x1 switcher with HDMI and USB-C inputs.
l Supports automatic switching.
l Controllable via front panel buttons and RS232.
l Supports HDMI 2.0, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision, HDCP 2.2.
l Provides charging on USB-C port up to 40W.
l Provides USB data (USB 3.0/2.0) and 4K video transmission on USB-C port.
l Balanced analog audio for audio de-embedding.
l Peripheral units (e.g. microphone and camera) can be connected by type-A USB
(USB 3.0/2.0) ports and automatically switched along with HDMI and USB-C input
as USB DEVICES for corresponding HOST.
l Smart EDID management capable for various applications and customized setting.
l Front panel buttons trigger both CEC and RS232 commands for display control.
(ON, OFF, MUTE, VOL+, VOL -).
18G 2x1 Presentation Switcher with Soft Codec and CEC
2
1.2 Package List
l 1x SCU21E-CODEC 18G 2x1 Presentation Switcher
l 2x Mounting Ears with 4 Screws
l 4x Plastic Cushions
l 1x 5-pin Terminal Block
l 1x RS232 Cable (3-pin terminal block to DB9)
l 1x Power Cord
l 1x Power Adapter (24V DC, 2.71A)
l 1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
18G 2x1 Presentation Switcher with Soft Codec and CEC
3
2. Specification
Video
Video Input
(1) HDMI, (1) USB-C
Video Input Connector
(1) Type-A female HDMI, (1) Type-C USB
HDMI Input Resolution
Up to 4Kx2K@60Hz 4:4:4 8bit
USB-C Input Resolution
Up to 4Kx2K@30Hz 4:4:4
Video Output
(1) HDMI
Video Output Connector
(1) Type-A female HDMI
HDMI Output Resolution
Up to 4Kx2K@60Hz 4:4:4 8bit
HDMI Version
2.0
HDCP Version
2.2
USB Version
3.0
HDR 10
Supported
CEC
Supported
HPD
Supported
Audio
Audio Output
(1) AUDIO OUT (Stereo balanced L/R)
Audio Output Connector
(1) 5-pin terminal block
HDMI Audio Format
LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital®
Plus, DTS: X™, and DTS-HD® Master Audio™ pass-through
Stereo balanced L/R audio
Format
PCM
Max Output Level
2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV)
nominal consumer line level signal
THD+N
<0.05% (-80dB), 20Hz ~ 20KHz bandwidth, 1KHz sine at 0dBFS
level (or max level)
SNR
>80dB, 20Hz ~ 20KHz bandwidth
Crosstalk Isolation
>70dB, 10KHz sine at 0dBFS level (or max level before clipping)
L-R Level Deviation
< 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping)
Frequency Response Deviation
<±0.5dB 20Hz ~ 20KHz
Output Load Capability
1KΩ and higher (supports 10x paralleled 10KΩ loads)
Stereo Channel Separation
>70dB@1KHz
Control Part
Control
(1) EDID, (1) FW, (1) RS232, (1) HOST, (2) DEVICE
Control Connector
(1) 4-pin DIP switch, (1) Micro-USB, (1) 3-pin terminal block, (1)
Type-B USB 3.0, (2) Type-A USB 3.0
General
HDMI 2.0 Cable Length
4K@60Hz 4:4:4 ≤ 5m,
18G 2x1 Presentation Switcher with Soft Codec and CEC
4
4K@60Hz 4:2:0 ≤ 10m,
1080P ≤ 15m
Bandwidth
18Gbps
Operation Temperature
-10℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Relative Humility
10% ~ 90%
External Power Supply
Input: AC 100~240V, 50/60Hz, Output: 24V DC 2.71A
Power Consumption
54W (Max)
Dimension (W*H*D)
168.0mm x 24.5mm x 95.0mm
Net Weight
245g
18G 2x1 Presentation Switcher with Soft Codec and CEC
5
3. Panel Description
3.1 Front Panel
①
Power LED: The LED illuminates red when the device is power on.
②
INPUT:
A. HDMI: The LED illuminates green when the HDMI input is selected in AUTO
mode, or illuminates orange when the HDMI input is selected in manual mode.
B. USB-C: The LED illuminates green when the USB-C input is selected in AUTO
mode, or illuminates orange when the USB-C input is selected in manual
mode.
C. SELECT AUTO/3s: Press the button to select the next input source, or press
and hold the button at least 3 seconds to enable auto switching mode. Note
that the factory default switching mode is AUTO.
③
DISPLAY:
A. Press ON to turn on the display.
B. Press OFF to turn off the display.
C. Press to mute/unmute display audio.
D. Press to decrease the audio volume gradually, or press and hold it to
decrease the audio volume constantly.
E. Press to increase the audio volume gradually, or press and hold it to
increase the audio volume constantly.
④
EDID: 4-pin DIP switch for EDID setting.
⑤
FW: Micro-USB port for firmware upgrade.
FW
EDID
ON
OFF
1
0
1 2 3 4
OFFONHDMI USB-C SELECT
AUTO/3s
INPUT DISPLAY
12
A A
B B
C C DE
345
18G 2x1 Presentation Switcher with Soft Codec and CEC
6
3.2 Rear Panel
①
HDMI IN: Type-A female HDMI input port to connect HDMI video source.
②
USB-C IN: Type-C USB with charging capability to connect the Macbook or other
device with SlimPort output.
Note: The USB 3.0 cable is recommended to be used to ensure optimal machine
performance.
③
HDMI OUT: Type-A female HDMI output port to connect video display.
④
AUDIO OUT: 5-pin terminal block for balanced audio output.
⑤
RS232: 3-pin terminal block to connect control device (e.g. PC) or third-party
device for RS232 control.
⑥
HOST: Type-B USB ports for host connection.
⑦
DEVICES: Two type-A USB ports to connect HID devices (e.g. microphone and
camera). The HID devices are used to control the HOST when the HDMI input has
been selected, or to control the USB-C source device (e.g. Macbook) when the
USB-C input has been selected.
⑧
DC 24V: DC barrel port for power adapter connection.
HDMI IN USB-C IN HDMI OUT AUDIO OUT DEVICES
1 2
RS232 HOST
L R
Tx Rx DC 24V
12345678
Table of contents
Other Woxcon Switch manuals
Woxcon
Woxcon SCU41E-VC User manual
Woxcon
Woxcon SC51TS User manual
Woxcon
Woxcon SCU41-MV User manual
Woxcon
Woxcon SCU41-BYOD User manual
Woxcon
Woxcon SCU42T-CODEC User manual
Woxcon
Woxcon SCU41T-TB User manual
Woxcon
Woxcon SCU41E User manual
Woxcon
Woxcon SCU42 User manual
Woxcon
Woxcon WUH4ARC-H2 User manual
Woxcon
Woxcon SCU61E User manual
