Woxcon TPUH407-US User manual
TPUH407-US
4K HDBaseT 2.0 Extender
All Rights Reserved
Version: TPUH407-US_2018V1.0
User Manual
4K HDBaseT 2.0 Extender
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till July,
2018. In the constant effort to improve the product, we reserve the right to make
functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
4K HDBaseT 2.0 Extender
SAFETY PRECAUTIONS
To ensur e t h e b e s t performance from the pr o d u c t , p l ease read all i n s t r u c t i ons carefully
before using the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prev e n t f i re or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4K HDBaseT 2.0 Extender
Table of Content
1. Product Introduction ................................................................................................... 1
1.1 Features ............................................................................................................ 1
1.2 Package List ...................................................................................................... 2
2. Specification ............................................................................................................... 3
2.1 Transmitter ........................................................................................................ 3
2.2 Receiver ............................................................................................................ 4
3. Panel Description ....................................................................................................... 5
3.1 Transmitter Front Panel ..................................................................................... 5
3.2 Transmitter Rear Panel ..................................................................................... 6
3.3 Receiver Front Panel ......................................................................................... 7
3.4 Receiver Rear Panel ......................................................................................... 8
4. System Connection .................................................................................................... 9
4.1 Usage Precaution .............................................................................................. 9
4.2 System Diagram ................................................................................................ 9
5. Button Control ........................................................................................................... 10
5.1 Signal Switching .............................................................................................. 10
5.2 Display Control ................................................................................................ 10
6. RS232 Control ........................................................................................................... 11
6.1 RS232 Connection ........................................................................................... 11
6.2 RS232 Control Software .................................................................................. 14
6.3 RS232 Command ............................................................................................ 15
6.3.1 Signal Switching .................................................................................... 15
6.3.2 CEC Command ..................................................................................... 15
6.3.3 HDCP Command ................................................................................... 16
6.3.4 Button Control User-defined .................................................................. 16
6.3.5 Factory Default ...................................................................................... 17
7. Panel Drawing .......................................................................................................... 18
7.1 Transmitter ...................................................................................................... 18
7.2 Receiver .......................................................................................................... 18
4K HDBaseT 2.0 Extender
8. Troubleshooting & Maintenance ............................................................................... 19
9. Customer Service ..................................................................................................... 20
4K HDBaseT 2.0 Extender
1
1. Product Introduction
Thanks for choosing the TPUH407-US HDBaseT2.0 extender, which consists of a
wallplate transmitter and a receiver. The extender is designed to transmit HDMI (1080P,
4K@60Hz 4:2:0), RS232 and USB signal up to 328ft/100m away by using a signal
CATx cable.
The wallplate transmitter features two HDMI inputs, and one of them can be selected
as the input source by the SOURCE/AUTO button on the front panel. It also features
Type-B USB port to connect a PC or other device which needs to be controlled by the
far-end HID devices (e.g. mouse, keypad and so on), which are connected to the Type-
A USB input ports of receiver. The transmitter supports CEC: the DISPLAY ON/OFF
button on the front panel is used to control the far-end display device, and it can be
programmed by RS232 command to ensure the compatibility with various display
devices. Moreover, 24V PoC allows the transmitter can be powered from the receiver,
and the transmitter has 12V DC output for powering other device.
1.1 Features
l Supports HDMI signal up to 4K@60Hz 4:2:0.
l HDMI 1.4 standard and HDCP 2.2 compliant.
l Automatically detect active input when source is connected.
l HDBaseT technology extends HDMI, USB and RS232 signal up to 328ft/100m
over CATx cable.
l Supports bi-directional RS232 pass-through with HDBaseT connection and local
control.
l Supports CEC to turn on/off display by the DISPLAY ON/OFF button.
l Ensures display of content-protected media and interoperability with other HDCP
compliant devices.
l Supports 24V PoC wide range, the transmitter can be powered from the receiver
by the CATx cable.
l Provides 12V power supply for other device like WP series Control Panel.
l Firmware upgrade by Micro-USB port.
4K HDBaseT 2.0 Extender
2
1.2 Package List
Wallplate
transmitter
l 1x TPUH407T-US Wallplate Transmitter
l 4x Mounting Screws
l 1x 2-pin Terminal Block
l 1x 3-pin Terminal Bl o c k
Receiver
l 1x TPUH452R Receiver
l 2x Mounting Ears
l 4x Mounting Screws
l 4x Plastic Cushions
l 1x RS232 Cable (3-pin to DB9)
l 1x Power Adaptor (24V DC 1.25A)
l 1 x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
4K HDBaseT 2.0 Extender
3
2. Specification
2.1 Transmitter
Input
Input
(2) HDMI
Input Connector
(2) Type-A female HDMI
Output
Output
(1) HDBT, (1) TO PC, (1) DC OUT
Output Connector
(1) RJ45, (1) Type-B USB, (1) 2-pin terminal block
Control
Control Port
(1) FIRMWARE, (1) RS232
Control Connector
(1) Micro-USB, (1) 3-pin terminal block
General
Bandwidth
10.2Gbps
HDMI Version
1.4
HDCP Version
2.2
Video Resolution
Up to 4K×2K@60Hz 4:2:0
Transmission Mode
HDBaseT
Transmission Distance
1080P/4K@60Hz ≤ 328ft/100m
Power Supply
Powered from the receiver by CATx cable.
Operation Temperature
-10℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Relative Humility
10%-90%
Dimension (W*H*D)
89mm x 104.5mm x 44mm
Net Weight
250g
4K HDBaseT 2.0 Extender
4
2.2 Receiver
Input
Input
(1) HDBT, (3) USB
Input Connector
(1) RJ45, (3) Type-A USB
Output
Output
(1) HDMI
Output Connector
(1) Type-A female HDMI
Control
Control port
(1) FIRMWARE, (1) RS232
Control Connector
(1) Micro-USB, (1) 3-pin terminal block
General
Bandwidth
10.2Gbps
HDMI Version
1.4
HDCP Version
2.2
Video Resolution
Up to 4K×2K@60Hz 4:2:0
Transmission Mode
HDBaseT
Transmission Distance
1080P/4K@60Hz ≤ 328ft/100m
AC Adapter Input Power
100V~240V AC, 50/60Hz
Input Power
24V DC 1.25A
Power Consumption
23W (Max, work with the transmitter)
Operation Temperature
-10℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Relative Humility
10%-90%
Dimension (W*H*D)
136mm x 25.5mm x 95mm
Net Weight
365g
4K HDBaseT 2.0 Extender
5
3. Panel Description
3.1 Transmitter Front Panel
①
POWER LED: The LED illuminates red when power is applied.
②
LINK LED: The LED illuminates green when the transmitter is successfully
connected to the receiver are by a CATx cable.
③
HDCP LED:
l The LED illuminates green when the HDMI signal is transmitted with HDCP.
l The LED blinks green when the HDMI signal is transmitted without HDCP.
l The LED turns off when there is no HDMI signal input.
④
SOURCE SELECT: Press the button to select the next input source, or press and
hold it at least 3 seconds to enable auto-switching mode. For more details, please
refer to the 5.1 Signal Switching on the page 10.
⑤
DISPLAY ON/OFF: Press the button to turn on/off the display. For more details,
please refer to the 5.2 Display Control on the page 10.
⑥
TO PC: Type-B USB port to connect a PC or other device needs to be controlled.
LINK
RESET
FIRMWARE
HD MI IN 1
HD MI IN 2
TO PC
SO URC E S ELE C T
DI SPL AY ON / OFF
2
13
4
8
10
12 11
7
9
5
6
Table of contents
Other Woxcon Extender manuals
Woxcon
Woxcon IPA100 User manual
Woxcon
Woxcon CE-EX50 User manual
Woxcon
Woxcon IPA200 User manual
Woxcon
Woxcon IPA400TR-P User manual
Woxcon
Woxcon NPG-EX60-H2 User guide
Woxcon
Woxcon NPG-EX10KVM User guide
Woxcon
Woxcon TPUH451 User manual
Woxcon
Woxcon CE-EX30DP User manual
Woxcon
Woxcon TPUH422 User manual
Woxcon
Woxcon TPUH4120 User manual
Woxcon
Woxcon NPG-EX80 User guide
Woxcon
Woxcon TPUH703 User manual
Woxcon
Woxcon CE-EX60-H2 User manual
Woxcon
Woxcon TPUH412 User manual
Woxcon
Woxcon WL-HDMI User manual
Woxcon
Woxcon IPA300TR User manual
Woxcon
Woxcon TPUH630 User manual
Woxcon
Woxcon TPU4120 User manual
Woxcon
Woxcon LR-EX1 User manual
Woxcon
Woxcon TPA33 User manual
