Woodbridge BID 01 User manual
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time)
www.woodbridgebath.com
R
WOODBRIDGE
Remote Control Illustration
Thank you for choosing our product.Please read the instructions carefully before
installation and keep it available for future maintenance or reference.
USER 1 USER 2
WATER
DRY SEAT
ENERGY
SAVER
PRESSURE POSITION
MASSAGE
FLUSH
NOZZLE
CLEANING
STOP
REAR FRONT DRY
USER MANUAL BID 01
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
1
www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
(1) (2)Tear the paster on back of
hanger.
(4) Install battery and place
remote control to the hanger.
Installation Preparation
Remote control installation
(3)Insert expansion tube into the hole on the
wall,install the hanger to the wall with a
screw, and paste the double faced adhesive
tape on hanger to the wall, tighten the screw.
Remote control hanger installation
Drill a hole of∮6mm on the wall with
depth of 35mm.
Notice：Please do not install and use the product in moist place, such as steam
room, and prohibit to place in the space where is easily got wet.
STOP
NOZZLE
CLEANING
REARFRONTDRY
MASSAGE
USER1USER2
Make sure end-user be able to reach the
remote control when sitting on the seat.
WATER
DRYSEAT
PRESSUREPOSITION
ENERGY
SAVER
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
2
www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
Picture 1
Please refer to page 8 for
operation method
DRY SEAT
STOP
NOZZLE
CLEANING
FLUSH
REAR FRONT DRY
MASSAGE
Remote control illustration
Usage Instruction
Massage
Drying
Front cleaning
Rear cleaning
Stop
Water pressure
Dry temperature
Energy saver
Water temperature
Flush button
Spray nozzle position
Seat temperature
Nozzle cleaning
Signal instruction
User code User code
USER 1 USER 2
Picture 3
Please refer to page 8 for
operation method
Picture 2
Please refer to page 9 and 11 for
operation method
ENERGY SAVER 3 6 9 H
PRESSURE POSITION
PRESSURE POSITION
WATER
DRY SEAT
ENERGY
SAVER
WATER
AUTO AUTO AUTO
Auto rear cleaning Auto rear / front cleaning
Auto front cleaning
Load settings user 1
Load settings user 2
USER 1 USER 2
Lid close / seat close
Lid open / seat close
Lid open / seat open
Hardware
configuration 1:
Hardware
configuartion 2: Load & act male rear wash
Load & act female bidet wash
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
3www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
Usage Instruction
Rear/Front cleaning
Press “REAR”/“FRONT ” button, the water comes out of wand to clean the rear/front
portion of body. It automatically stops after a cycle of cleaning. If press “STOP”
button when using, the function will stop immediately.
Drying Operation
Press “DRY” button, warm wind comes out of wand to dry. After a cycle or user
leaves the seat, it automatically stops.
Dry
Front
Rear
REAR FRONT DRY
DRY SEAT
ENERGY SAVER 3 6 9 H
PRESSURE
POSITION
WATER
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
4
www.woodbridgebath.com
R
WOODBRIDGE
Massage
PRESSURE
PRESSURE
Usage Instruction
Massage
Press “MASSAGE” button to activate massage function, the nozzle moves forward
and back to extend the cleaning scope; Press “MASSAGE” button again to stop the
function.
Spray nozzle position adjustment
During “REAR” or “FRONT”, press spray nozzle button of “ ” and “ ”, to move the
position forward and backward by adjusting 5 levels.
Water pressure adjustment
During “REAR” or “FRONT”, press water pressure button of “+” and “-”, to
adjust pressure for rear and front cleaning.
PRESSURE
MASSAGE
POSITION
Nozzle
DRY SEAT
ENERGY SAVER 3 6 9 H
PRESSURE POSITION
WATER
R
WOODBRIDGE
WOO
R
WOODBRIDGE
WOO
R
WOODBRIDGE
WOO
5
www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
energy saver icon
9:00 15:00
ENERGY SAVER 3 H
Usage Instruction
The toilet enters the
energy saver
mode from 9:00 to 15:00.
Energy saver light is on
Energy saver time
ENERGY
SAVER
Energy saver
Setting energy saver time
Press “ENERGY SAVER” button, LCD screen shows energy saver and figures. It
shows three options of energy saver period as 3-6-9-off, which can be selected
accordingly. For example, user can set from 9:00 to 15:00 as energy saver
according to following operation.
(1)Press“ENERGY SAVER”button, LCD screen shows
“ENERGY SAVER” icon.
(2)Press“ENERGY SAVER”button again, LCD screen shows figure “6”, and the “ENERGY SAVER”icon
disappear after 3 seconds, the setting succeeds. The toilet enters the energy saver mode from 9:00 to
15:00 every day. During this period, power light is off, and the energy saver light is on. It goes back to
normal operation mode after energy saver time.
Energy saver:
The toilet will be under energy saver mode automatically after setting. Under energy saver mode,
seat temperature is on low temperature status (first level) to achieve energy saver.
Notice:
If user sits on the seat, the energy saver mode is paused, and enters into the function mode, the
seat starts to heat immediately (under opening seat temperature circumstance). The energy saver mode
restores after user leaves.
When the energy saver mode is set, the icon disappears automatically, which is normal set.
(3)Cancel energy saver set: Press“ENERGY SAVER”button continuously until this function is
cancelled. (Nothing display on the screen.)
ENERGY SAVER 6 H
ENERGY SAVER
POWER
DRY SEAT
PRESSURE POSITION
WATER
DRY SEAT
PRESSURE POSITION
WATER
R
WOODBRIDGE
WOO
R
WOODBRIDGE
WOO
WOODBRIDGE
WOO
6
www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
Full flush (Onlyforthetoiletwithautoflushfunction）
Nozzle cleaning
Automatic deodorization (Onlyforthetoiletwithautodeodorizationfunction）
Nozzle self-cleaning by quick
press：
Quick press “NOZZLE CLEANING”
button, the nozzle self-cleans for a
while and move to the front
position (no spray). People can
continue to clean nozzle manually.
Usage Instruction
Press “FLUSH” button to activate full flushing.
FLUSH
Remark:
The deodorization function starts to work automatically as the user sits on the seat
and stops automatically 3 seconds after the user leaves the seat. When drying, the
function of automatic deodorization stops.
NOZZLE
CLEANING
self-clean for
90 seconds.
Nozzle self-cleaning by
long press：
Long press “NOZZLE
CLEANING” button, the
spray won’t move forward
and nozzle self-cleans for 90
seconds.
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
7
www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
Water temperature adjustment:
Press“WATER” button to adjust temperature for rear and front cleaning.
The LCD display of 1 to 5 lines means level 1 to 5.NO display means
normal temperature.To adjust level by up and down cycle.
Dry temperature adjustment:
Press“DRY”button to adjust temperature for drying.
The LCD display of 1 to 5 lines means level 1 to 5.NO display means
normal temperature.To adjust level by up and down cycle.
Seat temperature adjustment:
Press“SEAT”button to adjust temperature of seat.The LCD display of 1 to
5 lines means level 1 to 5.NO display means normal temperature.To
adjust level by up and down cycle.
DRY
DRY
Usage Instruction
Temperature adjustment
DRY
WATER
SEAT
ENERGY SAVER 3 6 9 H
ENERGY SAVER 3 6 9 H
ENERGY SAVER 3 6 9 H
ENERGY SAVER 3 6 9 H
WATER
DRY SEAT
PRESSURE POSITION
WATER SEAT
WATER
SEAT
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
8
www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
User code（Only for the toilet with User code function）
Long press “USER 1” or “USER 2”button to save the parameters, including
current pressure, nozzle position, dry temperature, water temperature, seat
temperature and massage status. Quick press “USER 1” or “USER 2” button to
use saved parameter.
Press “ ” button to close seat cover.
Press “ ” button to open lid and close seat.
Press “ ” button to open lid and seat.
Auto lid open/close(Only for toilet with this function)
DRY
Usage Instruction
USER 1 USER 2 USER 1 USER 2
Lid close / seat close
Lid open / seat close
Lid open / seat open
ENERGY SAVER 3 6 9 H
ENERGY SAVER 3 6 9 H
PRESSURE POSITION
WATER SEAT
DRY
PRESSURE POSITION
WATER SEAT
Hardware 1 support loading user settings only; hardware 2 support loading &
acting user settings simutaneously. Remarks: Hardware 1 & 2 are matched with
different smart seat/cover respectively. They do not coexist. Hardware 1 support
V8100 series, and hardware 2 support all except V8100 serises, generally for
now. Configuration refer to factual product version and subject to change.
Load settings user 1 Load settings user 2
Load & act male rear wash
Load & act female bidet wash
Hardware
configuration 1:
Hardware
configuartion 2:
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com
R
WOODBRIDGE
9
REMOTE CONTROL ILLUSTRATION
（Only for the toilet with auto flush function）
Auto function
Full-automatic function can be achieved by three “AUTO” buttons, convenient
and practical. User can pre-set the suitable nozzle position, water pressure
and temperature and save the setting. Full-automatic function will be activated by
pressing the related function button when using afterwards.
Usage Instruction
AUTO AUTO AUTO
Rear cleaning 90s Dry 180s
Dry 180s
Dry 180s
Front cleaning 90s
Rear cleaning 90s Front cleaning 90s
Automatic stop
Automatic stop
Automatic stop
Auto rear cleaning
ENERGY SAVER 3 6 9 H
DRY
PRESSURE POSITION
WATER SEAT
Other manuals for BID 01
1
Table of contents
Other Woodbridge Remote Control manuals
