Wolf Power WLED55SM User manual
Instruction Manual
D-LED TV 55”
Model No.: WLED55SM
3. Warnings.
1. The parts needed for installing the stand (supplied)
TV set
Stand
Before installing the stand, please check that
you have all of the parts and that there is no
visible damage. If a part is missing or appears
damaged, please contact customer service.
2. How to install the Stand?
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
Put the stand to the neck of the TV set as shown below.
1. Before you put on the stand, please make sure the direction is correct
as shown below.
2. When you are putting on the stand, please make sure the neck of the
TV set is in the correct position and attached tightly.
If you do not attach the stand correctly, it will make the TV unstable
and may tip over.
Attach the stand with the supplied screws.
When attaching the stand, make sure the screws
are attached tightly.
If the screws do not attach tightly, it will lead the TV
to be unstable or may even tip over.
a. It can not be tilted to the front or back as
shown below. Doing so may damage the
stand.
Top View
b. It can not be tilted to the right or left as
shown below. Doing so may damage the
stand.
Front
Back
Front
Screws(supplied)
6pcs x M4 x 25
Safety Information
Apps Menu
TV Menu
Picture Menu
Sound
Channel
Setting
2
3
8-10
11
12-13
14
15-16
17
Names of earch Part
4
Connections
Remote Control
Select Input Source
5-6
7
Media 18-19
20
21-23
Setting
24
Simple Troubleshooting
PC Menu
Caution 1
Fixing the stand 25
Contents
1
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-
of-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling center.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live in!
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
directives.
Caution
2
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical safety
To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial
(if outdoor) and mains power from the supply.
- Do not allow water or moisture to enter the TV . Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
3XOOWKHSOXJRXWLPPHGLDWHOy, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers. There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
Physical safety
'R12T block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm (2") clearance all around the unit.
'R12T tap or shake the TV screen, you may damage the internal circuitry. Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
7RFOHDQWKH79XVHDVRIWGU\FORWK'R127XVHVROYHQWVRUpetrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
Safety Information
3
User’s Guide Remote Control Batteries
Led Indicator & Remote Control window
(Keep clear)
Front View
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
Names of each part
INPUT
:
Press to display the input source menu.
MENU: Press to display the OSD menu, press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
:Turn on/standby theTV set.
CH+
CH-
VOL+
VOL-
4
AC POWER IN: Connect to power.
HDMI1/2/3: Connect it to the HDMI of DVD or other equipment.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
PC-IN: Connect it to the audio output terminal of PC.
Coax: Digital output to AV receiver.
RJ45: Connect the interface of the network card.
RF:Connect the antenna.
USB1/2:Connect to portable USB device.
YPbPr: Connect theYPbPr output jack of DVD or VCR.
Video: Connect to video intput terminal of external devices.
R/L: Connect to the audio intput terminal of external devices.(shared with YPbPr)
:
Connections
3
Video L in R in
PCRJ45 - in
USB2
USB1
COAX
YPbPr
5
The remote control is using Infra-Red(IR). Point it towards the front of the TV. The remote
control may not work correctly if it is operated out of range or out of angle.
Remote Control
:Home button
Buttons for Android
Buttons for TV
INPUT: Press to display the input source menu.
MENU: System setup menu.
EXIT: Exit the OSD menu.
DISPLAY: Press to display the current mode’s information.
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
CURSOR KEYS OK
CH / : Scan through channels.
VOL+/-: Adjust the volume.
PICTURE
ASPECT
SOUND
SLEEP
ZOOM IN
ZOOM IN:Make it bigger.
ZOOM OUT
ZOOM OUT:Make it smaller
123
456
789
0
VOL CH
INPUT
DISPLAY
MENU
EXIT
TV/TXT
CANCEL
REVEAL
NICAM/A2
INDEX
SIZE AUDIO
HOLD
SUBTITLE SUBPAGE
CHLIST
TV.TXT: Turn off/on the Teletext display.
CH.LIST: Display the channel list.
SIZE: Press to see top half of page double size,
Press again to see the bottom half of page
double size. Press again for normal size.
CANCEL:Cancel the Teletext display.
REVEAL:Reveal any hidden text.
NICAM/A2 AUDIO: TV Nicam/A2 select.
INDEX:Go to index.
HOLD:Hold or carry on the current subpage.
SUBTITLE: Turn on/off the subtitle display in DTV mode.
SUBPAGE: Press to enter subpages, pressagain to cancel.
6
Remote Control
MEDIA play
REC : Press to start record the program in DTV mode.
: Fast reverse.
: Fast forward.
: Stop program.
:Play/Pause program.
: Turn the TV on/standby.
MUTE: Press to mute the sound, press again or press
VOL+ to unmute.
PICTURE: Select the picture mode.
ASPECT: Change the screen display mode.
SOUND: Select the sound mode.
SLEEP: Standby timer.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you
are watching TV.
:Return to the previous channel viewed.
PICTURE
ASPECT
SOUND
SLEEP
ZOOM IN
ZOOM OUT
123
456
789
0
VOL CH
INPUT
DISPLAY
MENU
EXIT
TV/TXT
CANCEL
REVEAL
NICAM/A2
INDEX
SIZE AUDIO
HOLD
SUBTITLE SUBPAGE
CHLIST
: Switch the program digit.
:Previous chapter.
:Next chapter.
Table of contents
