Winmate W07FA3S-PCM1AC-PoE User manual

7"S-Series HMI

Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz

W07FA3S-PCM1AC-PoE (with LED Light Bar)

W07FA3S-PCM1-PoE (without LED Light Bar)

Slim-line

User Manual

Version 1.1

Document Part Number: 9171111I102D

7” S-Series HMI

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the prior

written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve

design and/or performance. We assume no responsibility or liability for the use of the

described product(s) conveys no license or title under any patent, copyright, or masks

work rights to these products, and make no representations or warranties that these

products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. We make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer

discovers a defect, we will, at his/her option, repair or replace the defective product at

no charge to the customer, provide it is returned during the warranty period of one

year, with transportation charges prepaid. The returned product must be properly

packaged in its original packaging to obtain warranty service. If the serial number and

the product shipping data differ by over 30 days, the in-warranty service will be made

according to the shipping date. In the serial numbers the third and fourth two digits

give the year of manufacture, and the fifth digit means the month (e. g., with A for

October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

7” S-Series HMI

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product. Second,

contact with your distributor, sales representative, or our customer service center for

technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day.

We are always ready to give advice on application requirements or specific information

on the installation and operation of any of our products.

7” S-Series HMI

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information

or to alert you to the potential for hardware damage or personal injury. These are Notes,

Important, Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to

avoid the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the

potential risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique

grave à la terre incorrecte.

7” S-Series HMI

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while

the power is on. Sensitive electronic components can be damaged by

sudden power surges. Only experienced electronics personnel should

open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques sensibles

peuvent être endommagées par des sauts d’alimentation. Seulement du

personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the

CPU card. Modern electronic devices are very sensitive to static electric

charges. As a safety precaution, use a grounding wrist strap at all times.

Place all electronic components in a static-dissipative surface or static-

shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns

sont très sensibles aux décharges d’électricité statique. Toujours utiliser

un bracelet de mise à la terre comme précaution. Placer toutes les

composantes électroniques sur une surface conçue pour dissiper les

charge, ou dans un sac anti-statique lorsqu’elles ne sont pas dans le

chassis.

Safety Precautions

For your safety carefully read all the safety instructions before using the device.

Keep this user manual for future reference.

Always disconnect this equipment from any AC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

The openings on the enclosure are for air convection and to protect the

equipment from overheating.

7” S-Series HMI

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

Before connecting the equipment to the power outlet make sure the voltage

of the power source is correct.

Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical

shock.

Never open the equipment. For safety reasons, only qualified service

personnel should open the equipment.

All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following

problems appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work

according to the user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of

injury.

Utiliser l’appareil de fixation recommandé pour éliminer le

risque de blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product.

When in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

7” S-Series HMI

vii

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne

se décharge pas sur vous.

Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

Use anti-static mats, heel straps, or air ionizer for added protection.

Handle electrostatic-sensitive components, PCB’s and assemblies by the

case or the edge of the board.

Avoid contact with pins, leads, or circuitry.

Turn off power and input signals before inserting and removing connectors

or test equipment.

Keep the work area free of non-conductive materials, such as ordinary

plastic assembly aids and Styrofoam.

Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners

that are conductive.

Always put drivers and PCB’s component side on anti-static foam.

viii

7” S-Series HMI

Important Information

Countries/ Area

Symbol

This equipment complies with essential

requirements of:

European Union

Electromagnetic Compatibility

Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous

substances (RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B"

digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at him own expense.

7” S-Series HMI

European Union

This equipment is in conformity with the requirement of the following EU legislations

and harmonized standards. Product also complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55032: 2012/AC:2013

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

7” S-Series HMI

About This User Manual

This User Manual provides information about using the Winmate® 7” S-Series HMI with

Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz (Optional Quad Core) processor. This User

Manual applies to the 7” S-Series HMI –W07FA3S-PCM1AC-PoE and W07FA3S-PCM1-PoE.

The documentation set for the 7” S-Series HMI provides information for specific user needs,

and includes:

7” S-Series HMI Quick Start Guide - describes how to get the box computer up and

running.

7” S-Series HMI User Manual –contains detailed description on how to use the Panel

PC, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Revision History

Version

Date

Note

1.0

17-Mar-2016

Initial release

1.1

25-Jul-2016

Add Winmate Home Manager AP

1.2

20-Dec-2016

Replace FA33 SBC with FA30-200

Other manuals for W07FA3S-PCM1AC-PoE

This manual suits for next models

Table of contents

Other Winmate Tablet manuals

Winmate

Winmate M101B Series User manual

Winmate

Winmate ID83 User manual

Winmate

Winmate M133W Installation and operation manual

Winmate

Winmate R08IP8M-RTU1GP User manual

Winmate

Winmate M116P Series User manual

Winmate

Winmate M101S User manual

Winmate

Winmate R12IHWS-MHM2 User manual

Winmate

Winmate M9020 User manual

Winmate

Winmate M101B Series User manual

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series User manual

Winmate

Winmate IA80 Series User manual

Winmate

Winmate M101H User manual

Winmate

Winmate M133 Series User manual

Winmate

Winmate W07I98M-RTC1 User manual

Winmate

Winmate M700D User manual

Winmate

Winmate M700DM4-EX User manual

Winmate

Winmate M101Q8-ME Series User manual

Winmate

Winmate R08I68M-RT Series User manual

Winmate

Winmate M101BT Series User manual

Winmate

Winmate R08IWK8M-RTU1GP User manual

Winmate

Winmate M101RK Series User manual

Winmate

Winmate M101 Series User manual

Winmate

Winmate M700DM4 User manual

Winmate

Winmate I98H5 User manual

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

DT Research

DT Research DT365CT Basic operation guide