Winmate M101BC User manual

Getting Started

Congratulations on purchasing this rugged Tablet Computer. The rugged design allows you to

use it in harsh outdoor environments.

This quick start guide tells you step by step how to get the Tablet Computer up and running. You

will find instructions for the following procedures:

•Unpacking

•Description of Parts

•First Time Operations

•Turning On/Off

Unpacking

Check and identify the supplied accessories:

•Tablet Computer

•Standard Battery

•Driver CD

•Power Adapter (19 V)

•Power Cord and Plugs

•Quick Start Guide

•Capacitive Touch Stylus with

tether

•Standard I/O Cover

•Rubber tip for Capacitive touch

stylus

•Screw driver tool

10.1” Bay Trail Tablet PC Quick Start Guide 1

Description Of Parts

Front:

Right:

Item

Description

Front Camera

2 Megapixel Webcam

LED Indicators:

Show the current status of

the Tablet Computer

Green - WiFi/BT/3G/GPS

No light - None of

WiFi/BT/3G/GPS is ON

HDD

Green - Harddrive Activity

No light - Harddrive Idling

Battery

Orange – AC adapter is

plugged in and charging

Green – AC adapter is

plugged in and battery is

completely charged

Solid Red - Low battery

(<10%)

Blinking Red – Battery is

being hot swapped.

Not lit – Battery is in use

and more than 10%

Power

Blue – Tablet is ON

No light – Tablet is OFF

3 Touch Screen

Displays and act as one of

the inputs for the Tablet

Computer

4 Fn1 Button

Programmable function

key configured by HotTab

Utility. Default: Web

Browser

Menu Button

HotTab Quick Access

Power Button

Turns on/off tablet

Front LED Indicators Detail:

Item

Description

I/O Cover

Protects I/O ports

8 Micro HDMI

HDMI output to external

display

9 LAN/RS232

Adapter port for

LAN/RS232 connector

10 USB 3.0

High speed USB port

connects to USB

devices, such as USB

flash drive, mouse,

keyboard, printer, etc.

11 Mic In/Line Out

Headset or headphone

can be connected (Mic

is only supported with

3.5mm 4-pin headset)

Power Jack

DC-IN power input jack

MicroSD Card

Reader

Memory card reader

port for MicroSD Card

Reset Button

Hardware reset button

Side I/O Details:

Front Buttons Details:

2 10.1” Bay Trail Tablet PC Quick Start Guide

Rear:

Bottom:

Item

Description

Kensington

Lock Port

Provides lock access for

Kensington Lock.

16 Optional

Barcode

Barcode Scanner for

reading of 1D/2D

barcode.

17 Optional RFID

RFID reader for reading

of RFID tags.

18 Rear Camera 5MP Autofocus Camera.

Captures photos and

videos.

19 Camera Flash LED camera flash to

provide flash lighting

when camera is in use.

20 Fn2 Button

Programmable function

key configured by

HotTab Utility. Default:

Camera

21 Volume Buttons Volume Control.

(+) Raises volume,

(-) Lowers volume.

22 Battery Lock

Latch

Latch to lock the battery

in place once battery is

inserted. Not spring-

loaded.

Battery Release

Slider

Spring-loaded slider that

latches the battery in.

24 Touch Pen Slot

Pen holder slot to store

touch pen

25 3G Module/SIM

card slot

Service window to insert

Micro SIM card. Also

provide access to 3G

Module.

Speakers

Emits sounds.

Item

Description

27 Docking

Connector

Port to docking solutions

such as vehicle docking

to provide power and

external antenna

Docking Connector Detail:

Rear Buttons

Detail:

Battery Lock Latch

Detail:

10.1” Bay Trail Tablet PC Quick Start Guide 3

Combination Keys (Keyboard Key Emulation)

For the physical buttons on the 10.1” Bay Trail tablet computer, in addition to their dedicated

functions detailed in the previous section, they can also be used to emulate commonly used

keyboard key strokes. Under different scenario, a single physical button or a combination of

physical buttons provide different keyboard key strokes, which are specified below:

Under POST (before Windows boots up):

Buttons

Keystroke

Fn1

Recovery Menu

Fn2

ESC

Volume Up

Volume Down

Down

Menu + Fn1

Enter

Menu + Volume Up

Right

Menu + Volume Down

Left

Under Windows:

Buttons

Keystroke

Volume Up + Volume Down

Ctrl + Alt + Del

4 10.1” Bay Trail Tablet PC Quick Start Guide

First-time Operation

Insert SIM card (For Optional 3G/LTE equipped device)

The Tablet Computer supports data connection using 3G/LTE SIM cards and fits a Micro-SIM

card. (Note: 3G/LTE feature is optional). Perform the following to install the SIM card into your

Tablet Computer:

Caution •Please perform this action in the safe zone

1. Remove the service window in the rear by unscrewing the four screws.

2. Remove the screw that is securing the 3G/LTE module.

3. Carefully lift the 3G wireless module up, and be careful not to damage the connected

cable.

4. Make sure the SIM card IC contact patch is faced down; the notch is in the direction of

insertion (towards right).

5. Insert the 3G SIM card into the slot located near the right side of the service window.

6. Reposition the removed 3G/LTE module screw to secure the 3G/LTE module.

7. Reposition the removed service window screw to secure the service window.

Step 1

Step 2

Step 3

Step 4

10.1” Bay Trail Tablet PC Quick Start Guide 5

Inserting Battery Pack

To insert the included standard battery pack into the Tablet Computer:

Caution •Please perform this action in the safe zone

1. Disconnect any cords connected to the tablet computer.

2. Turn the tablet computer over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.

5. Insert the battery with the connector-pins side first, and then lower the battery into the

battery compartment. Continue to hold the Battery Release Slider until the battery is fully

inserted.

6. Make sure the battery is completely lowered into the compartment before letting go of the

Battery Release Slider. Battery will be flat against the housing once fully inserted

Removing the Battery Pack

1. Shut down the tablet computer (or put it to sleep). Disconnect any cords connected to the

computer.

2. Turn the tablet computer over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.

5. Lift the battery out using the opening on side of battery compartment.

Connecting to Power Supply

The Tablet Computer operates either on external AC power or internal battery power. It is

recommended to use AC power when you start up the Tablet Computer for the first time. In this

C1D2 version, the I/O connector is only accessible by tooling (screwdriver). To connect the tablet

computer to AC Power, user needs to remove the I/O Cover.

Caution •Please remove the I/O cover in the safe zone

6 10.1” Bay Trail Tablet PC Quick Start Guide

Perform the following to remove the I/O Cover:

1. Turn the tablet computer over, back facing up

2. Remove the I/O Cover on the side by unscrewing the three screws

3. Remove the screw that is securing the I/O Cover

4. Carefully lift the I/O Cover

Caution

•Use only the AC adapter included with your Tablet Computer. Using

other AC adapters may damage the Tablet Computer and the Battery.

•

Please perform this action in safe zone

Perform the following to connect the Tablet computer to AC Power:

1. On the side of the Tablet computer, lift the I/O protective cover by pulling on the latch

2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.

3. Plug the AC power cord into the AC adapter.

4. Finally, Plug the AC power cord into the electrical outlet.

When the AC Adapter is connected, the battery pack starts charging. The battery LED indicator

on the tablet computer will show different states. Please refer to description of the LED indicator

in the Description of Parts.

Caution •Please perform this action in the safe zone

10.1” Bay Trail Tablet PC Quick Start Guide 7

When the LED indicator turns green, this indicates the device is fully charged and User needs to

perform the following to reinstall the I/O Cover:

1. Turn the tablet computer over, back facing up

2. Reposition the I/O Cover on the side by placing the three screws into the screws hole

3. Carefully insert the three screws until it covers the I/O

Note: User can also use standard I/O Covers for device deployment in the safe zone; perform the

following to install the standard I/O Covers:

1. Place the seal mounting plate into the inset of the I/O seal

2. Insert the three screws into the plate, making sure not to over tighten them

3. Make sure the I/O seal is properly aligned and the port is correctly sealed

8 10.1” Bay Trail Tablet PC Quick Start Guide

Turning On / Off

Turning On

Press and hold the power switch for 3 seconds until the blue LED power indicator light is lit up.

Note:

•Do not press the power switch repeatedly.

•Do not perform the following operations until the hard drive indicator turns off

oConnecting or disconnecting the AC adapter

oPressing the power switch

oTouching the tablet buttons, screen, or external keyboard/mouse

Turning Off

Perform the following procedure to shutdown the Tablet Computer:

1. Make sure you have closed any programs that are open on the Desktop. Start Screen

apps don’t need to be closed.

2. Open the Charms Bar by swiping your finger from the far right of the screen towards the

middle of the screen.

3. Tap on the Settings charm.

4. Tap on Power.

5. Tap on Shut Down.

6. Wait for the Tablet Computer to power off.

Note:

•The computer will forcefully be turned off if the power switch is pressed and held for six

seconds or longer.

10.1” Bay Trail Tablet PC Quick Start Guide 9

Other manuals for M101BC

Table of contents

Other Winmate Tablet manuals

Winmate

Winmate M101PR User manual

Winmate

Winmate Slim-line User manual

Winmate

Winmate R08IP8M-RTU1GP User manual

Winmate

Winmate M133W Installation and operation manual

Winmate

Winmate M101Q8-ME Series User manual

Winmate

Winmate M900P User manual

Winmate

Winmate M116P Series User manual

Winmate

Winmate R03TACH-RTSH User manual

Winmate

Winmate M101BK User manual

Winmate

Winmate I98H5 User manual

Winmate

Winmate Porty G4 User manual

Winmate

Winmate W07IB3S-PCM1AC User manual

Winmate

Winmate M700DM4 User manual

Winmate

Winmate M101HU Series User manual

Winmate

Winmate M101EKB User manual

Winmate

Winmate M9020 User manual

Winmate

Winmate M101S User manual

Winmate

Winmate M101B Series User manual

Winmate

Winmate M101EKB User manual

Winmate

Winmate M101BT Series User manual

Winmate

Winmate M700DM4 User manual

Winmate

Winmate M700DM8 Series User manual

Winmate

Winmate M101BC User manual

Winmate

Winmate M101M8 Series User manual

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

DT Research

DT Research DT365CT Basic operation guide