Winegard HD9065P User manual

INSTRUCTIONS

VHF/UHF

MODELS HD9065P, HD9085P, HD9095P

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000

Printed in U.S.A. 1450173 © Winegard Company 2002 Rev. 1/02

90 DAY LIMITED WARRANTY

Winegard Company warrants this Winegard product against any defects in

materials or workmanship within 90 (ninety) days from date of purchase. No warranty

claim will be honored unless at the time the claim is made, you present proof of

purchase to an authorized Winegard dealer (if unknown, please contact Winegard

Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone 319-754-

0600).

Winegard Company (at its option) will either repair or replace the defective product

at no charge to you. This warranty covers parts, but does not cover any costs incurred

in removal, shipping or reinstallation of the product. This limited warranty does not apply

if the product is damaged, deteriorates, malfunctions or fails from: misuse, improper

installation, abuse, neglect, accident, tampering, modification of the product as originally

manufactured by Winegard, usage not in accordance with product instructions or acts

of nature such as damage caused by wind, lightning, ice or corrosive environments such

as salt spray and acid rain.

The 90 Day Warranty is provided on the condition that the equipment is properly

delivered with all handling and freight charges prepaid to your Winegard dealer for

return to our factory for repair or replacement. Winegard dealers will arrange for the

replacement or repair and return to you without charge the product which failed due to

defective material or workmanship.

WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER

WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY

INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND

MERCHANTABILITY ARE LIMITED TO THE 90-DAY PERIOD OF THIS WAR-

RANTY.

The foregoing shall be the sole and exclusive remedy of any person, whether in

contract, tort or otherwise, and Winegard shall not be liable for incidental or conse-

quential damage or commercial loss, or from any other loss or damage except as set

forth above.

Some states do not allow limitations on how long an implied warranty lasts, or the

exclusion of limitation of incidental or consequential damages, so the above limitations

or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state.

WARNING

INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS DANGEROUS.

FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.

UHF

MODEL HD9095P

UHF

MODEL HD9085P

UHF

MODEL HD9065P

High Definition (HD)

Platinum Antennas

WARNING

INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS

DANGEROUS. FOR YOUR SAFETY, FOLLOW THE INSTALLATION

INSTRUCTIONS.

STEP 5. To attach the cartridge housing to

the antenna, align the snaps on the car-

tridge housing with the snap holes on the

cartridge housing receptacle on the an-

tenna and push the housing into the recep-

tacle until it snaps into place. See Figure 4.

STEP 6. Attach the 75 ohm coaxial cable

to the “downlead” connection on the car-

tridge housing. If a VHF antenna is in-

stalled, connect the VHF downlead to the

unlabeled connector on the cartridge hous-

ing. Slide weather boot over connectors

and boot collar. See Figure 4.

STEP 7. To mount the antenna on the mast,

loosen the nuts on the mast clamp(s). Slide

antenna booms and braces and clamps

over the mast and tighten securely so they

are parallel. See Figure 5.

STEP 8. The 75 ohm coaxial cable down-

lead may be secured to the mast by taping

or the use of plastic wire ties.

HOW TO PROVIDE LIGHTNING

PROTECTION FOR TV

ANTENNA AND SET

STEP 1. Mount the grounding block as

close as possible to where 75 ohm coaxial

cable downlead enters the house. See Fig-

ure 6.

STEP 2. The ground wires for both the

mast and the downlead should be copper

or aluninum wire, number eight (8) or

larger. See Figure 6.

STEP 3. The downlead wire from the an-

tenna to the grounding block and the mast

ground wire should be secured to the

house, spaced from four (4) to six (6) feet

apart. See Figure 6.

NOTE: In the case of a “ground up” an-

tenna installation, it may not be necessary

to ground the mast if the mast extends four

or more feet into the earth. Consult a TV

serviceman for the proper depth in your

location.

STEP 1. Unfold the elements on the top

and bottom reflector booms. Swing the el-

ements out until they lock into position. See

Fig. 1.

STEP 2. Unfold the reflector booms mak-

ing sure they lock into place.

STEP 3. Remove the bolt and hex nut from

the boom brace. Attach the boom brace to

the top reflector boom (cartridge housing

should be on bottom of antenna) so mast

clamps are on the same side. Replace the

bolt and hex nut. Tighten securely. See Fig-

ure 2. (HD9095P has a top & bottom brace.)

HD9085P & HD9095P

STEP 4. Remove the bolt and hex nut hold-

ing the element on the tapered end of the

front boom. Slide the two sections together.

The elements should be on top (cartridge

housing on the bottom of the antenna).

Replace the element, bolt and hex nut and

tighten securely. See Figure 3.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Antenna Lead

In Wire

Ground

Clamp

Electric

Service

Equipment Antenna

Dischar

e Unit

(

NEC Section 810-20

)

Power Servi ce Groundin

Electrode System

(NEC Art 250, Part H)

Ground

Clamps

Groundin

Wire Conductors

(NEC Sect ion 810-21)

NEC - National Electrical Code

Example of antenna grounding as per

National Electrical Code, ANSI/NFPA 70

Rain Drip Loop On

Lead-In To TV

CARTRIDGE

HOUSING

RECEPTACLE

BOOT

COLLAR

CARTRIDGE

HOUSING

VHF COUPLING

INPUT

DOWNLEAD

JACK

75 OHM COAXIAL

CABLE (DOWNLEAD)

WEATHER

BOOT

BOOM BRACE

BOLT

HEX

NUT

MASTING

MAST CLAMP

INSERT

HEX NUT

U-BOLT

BOOM BRACE

BOOM

This manual suits for next models

Other Winegard Antenna manuals

Winegard

Winegard MT-4000 User manual

Winegard

Winegard RM-4600 Original instructions

Winegard

Winegard HD-7084P User manual

Winegard

Winegard HD7082P User manual

Winegard

Winegard SensarPro User manual

Winegard

Winegard Rayzar Z1 RZ-5000 User manual

Winegard

Winegard TRAV’LER DISH 1000 User manual

Winegard

Winegard Trav'ler User manual

Winegard

Winegard AIR 360+ User manual

Winegard

Winegard Carryout User manual

Winegard

Winegard Sensar HV CC-25HV User manual

Winegard

Winegard YA-6260 User manual

Winegard

Winegard Sensar HV CC-10HV User manual

Winegard

Winegard TR-6100 User manual

Winegard

Winegard PR-7015 User manual

Winegard

Winegard Movin' View MV3500A User manual

Winegard

Winegard HD-9095P User manual

Winegard

Winegard Movin' View MV-4000 User manual

Winegard

Winegard Rayzar User manual

Winegard

Winegard AIR 360+ User manual

Winegard

Winegard YA-7000 User manual

Winegard

Winegard AS-2003 Operating instructions

Winegard

Winegard 2-WAY SATELLITE INTERNET SYSTEM User manual

Winegard

Winegard RD-9046 User manual

Popular Antenna manuals by other brands

Alfa Network

Alfa Network APA-L01 Specifications

Naval

Naval PR-422CA Operation manual

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series manual

TERK Technologies

TERK Technologies TV44 owner's manual

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK quick start guide

HP J8999A instructions

MobilSat

MobilSat MSP-S Mounting instructions

Steren

Steren ANT-UHF 13 instruction manual

Novatel

Novatel 600-G User information

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna owner's manual

TRENDnet

TRENDnet TEW-AO12O Specifications

Radio Shack

Radio Shack 15-1837 owner's manual

CommScope

CommScope CMAX-OMFX-43M-I53 Installation instruction

Ramsey Electronics

Ramsey Electronics DAP25 Kit assembly and instruction manual

COBHAM

COBHAM SAILOR 800 VSAT Replacement procedure

Trango Systems

Trango Systems AD900-9 Specification sheet

Steren

Steren ANT-100 user manual

Proxim

Proxim 5054-PA-23 quick start guide