Wincomm WLP-7B20 Series User manual
WLP-7B20 Series
User’s Manual
P/N: 205G00WLP7B200, Version V1.3
Copyright 2016, ALL RIGHTS RESERVED.
All other brand names are registered trademarks of their
respective owner
Copyright Notice
Copyright © 2016
All Rights Reserved.
Printed in Taiwan.
The information contained in this document is subject to change
without any notices.
Acknowledgments
Greeting & Setup
Thank you for purchasing the WLP-7B20 Panel PC. We wish that
this unit will be durable and reliable in providing your needs.
Please follow the instructions below to ensure the unit continues to
have high performance
Unpacking
After opening the carton, there will be a unit with an accessory box.
Examine the contents to see if there are damages to the unit and
if all accessories are present.
Setting up
Please read this manual carefully and remember to keep this
manual for future reference.
Safety Instructions & Cleaning
The unit has undergone various tests in order to comply with
safety standards. Inappropriate use may be dangerous. Please
remember to follow the instructions below to insure your safety
during the installation and operating process.
Transporting & Placement of unit
III
1. When moving the unit on a cart; be very cautious. Quick stops,
excessive forces and uneven surfaces may cause the cart to
overturn thus risking the unit to fall to the ground.
2. If the Monitor display unit does fall to the ground, immediately
turn the power off and disconnect cords. Then contact a
service technician for repairs. Continual use of the unit may
result cause a fire or electric shock. Also, do not repair the
unit on your own.
3. Having two or more people transporting the display unit is
recommended. In addition, when installing the open frame by
suspending it also requires two or more people.
4. Before suspending the unit, make sure the material used for
suspension is sturdy and stable. If not properly suspended,
the display unit may fall and cause serious injury to people
standing nearby as well as to the unit itself.
5. If you wish to mount the display unit, remember to use only
the mounting hardware recommended by the manufacturer.
Electrical and Power Source Related
1. This Monitor display unit must operate on a power source as
shown on the specification label. If you are not sure what type
of power supply used in the area, consult your dealer or local
power supplier.
2. The power cords must not be damaged. Applied pressure,
added heat, and tugging may damage the power cord.
3. The power cord must be routed properly when setup takes
place. We advise that this aspect measure is to prevent
people from stepping on the cords or while the unit is
suspended to prevent flying objects from getting tangled with
IV
the unit.
4. Do not overload the AC outlets or extension cords. Electrical
shocks or fires may occur from overloading.
5. Do not touch the power source during a thunderstorm.
6. If your hands are wet, do not touch the plug.
7. Use your thumb and index finger, grip firmly on the power cord
to disconnect from the electrical socket. By pulling the power
cord, may result in damaging it.
8. If the unit is not going to be in use for an extended period of
time, remember to disconnect the unit.
9. Connect the unit to a power source with the same numerical
value as spec. label shown. Please use only the power cord
provided by the dealer to ensure safety and EMC compliance.
Various Factors of Environment
1. Do not insert objects into the openings.
2. Do not have liquids seep into the internal areas of the Monitor
display unit.
3. Having liquids seep in or inserting objects into the unit may
result in electric shocks from taking and/or short circuiting
the internal parts.
4. Do not place the Monitor display unit in the presence of high
moisture areas.
5. Do not install the Monitor display unit in a wet environment.
6. Do not place near unit near heat generating sources.
7. Do not place the unit in a location where it will come in contact
with fumes or steam.
8. Remember to keep the Monitor display unit away from the
presence of dust.
V
9. If water has flow in or seep in, immediately disconnect the
open frame unit. Then contact a service technician for repairs.
Ventilation Spacing
1. Do not cover or block the openings on the top and back sides of
the display unit. Inadequate ventilation may cause
overheating thus reducing the lifespan of the unit.
2. Unless proper ventilation is present, do not place unit in an
enclosed area; such as a built-in shelf. Keep a minimum
distance of 10 cm between the display unit and wall.
Cleaning the unit
1. Remember to turn off the power source and to unplug the cord
from the outlet before cleaning the unit.
2. Carefully dismount the unit or bring the unit down from
suspension to clean.
3. Use only a dry soft cloth or clean room wiper when cleaning
the LCD panel or touch screen surface. Use a soft cloth
moistened with mild detergent to clean the display housing.
4. Remember to avoid having liquids seep into the internal
components.
Servicing, Repairing, Maintenance & Safety Checks
1. If the unit is not functioning properly, observe the performance
level of the display closely to determine what type of servicing
is needed.
2. Do not attempt to repair the Monitor display unit on your own.
Disassembling the cover exposes users’ to high voltages and
other dangerous conditions. Notify and request a qualified
service technician for servicing the unit.
VI
3. If any of the following situations occur turn the power source
off and unplug the unit. Then contact a qualified service
technician
i. A liquid was spilled on the unit or objects have fallen into
the unit.
ii. The unit is soaked with liquids.
iii. The unit is dropped or damaged.
iv. If smoke or strange odor is flowing out of the open frame
unit.
v. If the power cord or plug is damaged.
vi. When the functions of the unit are dysfunctional.
4. When part replacement is needed. Make sure service
technician uses replacement parts specified by the
manufacturer, or those with the same characteristics and
performance as the original parts. If unauthorized parts are
used it may result in starting a fire, electrical shock and/or
other dangers.
Battery Installation
Follow below instructions and notice the caution for replacing and
disposing of the RTC Lithium battery CR2032 for safety
consideration.
CAUTION:
There is danger of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer’s instruction.
The specification is subject to change without notice.
VII
Version Change History
Date
Version
Description
Remark
2015/3/13
V1.0
First release
Cosa
2015/4/20
V1.1
Modify Spec. of Touch
Cosa
2015/9/4
V1.2
Change Outline Drawing
Modify Font
Add Spec. of Shock/Vibration/Drop
Cosa
2016/3/8
V1.3
Add Panel Precautions
Add Cautions with Continuous
displaying fixed pattern
Cosa
VIII
Table of Contents
How to Use This Manual................................................. IX
System Overview............................................... 1
System View ..................................................................6
I/O connectors ...............................................................8
VESA mount installation...................................................9
Panel mount installation ................................................ 10
Unpacking.................................................................... 12
Getting Started.................................................14
Setting up the System................................................... 14
Installing System Software ............................................ 14
Installing the Drivers..................................................... 15
BIOS Setup Information ...................................19
Appendix ..........................................................32
A. Jumper settings and Connectors ..................32
B. Wake UP on LAN Function ............................54
IX
How to Use This Manual
This manual is written for the system integrator, PC technician
and knowledgeable PC end user. It describes how to configure your
WLP-7B20 Panel PC to meet various operating requirements. The
user’s manual is divided into three chapters, with each chapter
addressing a basic concept and operation of the server board.
Chapter 1: System Overview - presents what you have
inside the box and gives you an overview of the product
specifications and basic system architecture for the WLP-7B20
Panel PC.
Chapter 2: System Installation - describes how to set up
the system.
Chapter 3: BIOS Setup Information - specifies the
meaning of each setup parameter, how to get advanced BIOS
performance and update to a new BIOS. Additionally, the POST
checkpoint list will give you a guide for troubleshooting.
The contents of this manual are subject to change without prior
notice. These changes will be incorporated in new editions of this
manual.
1
System Overview
System Specification
CPU
Intel® Celeron® J1900 2.0 GHz quad-core processor
Chipset
Intel® HD Graphics
Audio
Realtek ALC262 audio codec, 2+2 watts power
amplifier
LAN
Gigabit Ethernet x 2
Memory
Dual Channel, two DDR3 SODIMM socket support up
to 8GB DDR3L-1333
I/O
EC
Serial ATA
SATA II controller (3.0Gb/sec) Port x 2
Serial port
External RS232/RS422/RS485 x 1(Set by BIOS,
RS485 auto flow), RS232 x 1
Internal RS232 x 1
RS232 (Jumper 5V, 12V) x1
USB
External USB 2.0 type a x 3, USB3.0 x 1
Internal Mini-PCIE x2 (Default ) or USB 2.0 pin
head x 2 (Option)
Touch x 1
USB 2.0(Pin head) x 3
WDT
Generates system reset; 256 segments, 0, 1, 2…255
sec/min.
BIOS
Brand: AMI
Flash ROM size: 64Mb
Support RTC wakeup /Wake on LAN /Power on after power
failure/PnP/ACPI/RTC
Table of contents
Other Wincomm Touch Panel manuals
Wincomm
Wincomm WMP-19B User manual
Wincomm
Wincomm WTP-8B66 Series User manual
Wincomm
Wincomm WMP-17F User manual
Wincomm
Wincomm WLP-7821-17 User manual
Wincomm
Wincomm WTP-8B66 Series User manual
Wincomm
Wincomm WTP-8866-19 User manual
Wincomm
Wincomm WTP-9E66-15 User manual
Wincomm
Wincomm WTP-8B66-15O User manual
Wincomm
Wincomm WMP-153 User manual
Wincomm
Wincomm WMP-248 User manual
Popular Touch Panel manuals by other brands
IBASE Technology
IBASE Technology ASTUT-152-RE1S user manual
YASKAWA
YASKAWA TP 610C manual
B&R
B&R Power Panel C Series user manual
Beijer Electronics
Beijer Electronics X2 control Hardware and installation manual
AXIOMTEK
AXIOMTEK GOT321W-521 user manual
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Operation manual
