Wimius K8 User manual
WiMiUS 7/24 Professional Support
TIPS
PACKAGE LIST
PROJECTOR SPECIFICATIONS
PROJECTOR OVERVIEW
REMOTE CONTOL
INSTALLATION
1.Installation Method
2.Install on the Ceiling
STARTING PROJECTOR
IMAGE ADJUSTMENT
1.Focus Adjustment
2.Digital 4D Keystone Correction
SETTING UP THE PROJECTOR
1.Select The Input Signal Source
2.USB Disk Input Mode
3.WiFi Setting
3.1.iOS Cast(for iOS Devices)
3.2.Miracast(for Android Devices)
4.Bluetooth Setting
5.Projector Image Setting
5.1.Projection Mode
5.2.Keystone Advanced & 4-Point Keystone
5.3.Digital Zoom
6.Image Setting
7.Other Settings
8.About
SIGNAL LINES CONNECTION
1.Connect USB Disk
2.Connect the Devicesvia the HDMI ports
3.Connect to the DVD Player
4.Connect to the Soundbar/Speaker
SAFE SHUTDOWN
WARRANTY
TROUBLESHOOTING
1
12
13
45
55
55
55
56
55
55
66
65
55
56
56
46
55
55
45
66
65
55
56
56
46
55
55
45
66
65
55
56
56
46
55
55
CONTENTS
WiMiUS 7/24 Professional Support
Dear customer,
Thank you very much for supporting WiMiUS!
Please read this manual thoroughly before using the projector. If you have any
We will provide a fast solution within 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no
sound, bluetooth connection failed, WiFi connection failed, dark spots, choppy
animation etc. We promise all the projectors have been 100% carefully checked
and packaged before shipping.
If you have any questions, could you please contact us so that the problem can
been solved. And give us an opportunity to improve. We guarantee we will
provide you a satisfactory solution.
Thanks for your understanding!
WiMiUS Service Team
Do not place projector in too warm or too cold room, because the high
temperature or low temperature will shorten lifespan of the device. The
working environment would be 5℃~35℃better.
If there are black spots on the projection screen, please don't worry, please
how to remove the dust.
The ventilation is equipped for the projector to work stably. Don't cover the
vent with cloth, blanket or other things. Don't insert anything into the slit of
the projector, or it may produce a short circuit or an electric shock to your
device and cause damage.
The projector shall be strictly protected from strong impact, extrusion and
vibration. Do not try to move and on strong impact, extrusion and vibration.
Do not try to move and the internal circuit faults.
Lens, as the core component of the projector, is directly related to the picture
definition and effect. The excessive dust thereon will affect image quality.
The dirty lens shall be wiped with soft cotton cloth for the glass lens surface.
Hard cloth or abrasives shall not be used.
1.
2.
3.
4.
5.
TIPS:
EN 01
WiMiUS K8 Projector*1 HDMI Cable*1
Cleaning Cloth*1 Remote Control*1 3-in-1 AV Cable
User Manual*1 Power cable*1 Projector case*1
PACKAGE LIST
PROJECTOR SPECIFICATIONS
Display Technology
Native
Resolution
Installation Type
Projection Distance
Product Size
Input Interface
Video File
Audio File
LCD
1920x1080P
Front/Rear on Desk,
Front/ Rear on Ceiling
1.6-5.5m
260x245x100mm
HDMI*2/USB*2/AV/
3.5mm audio
Light Source
Focus
Aspect Ratio
Power Voltage
Product Weight
Picture File
LED
Manual
16:9/4:3/Auto
AC100-240V
2kg
JPG/GIF/BMP/PNG
MP4/MKV/MOV/3GP
MP3/MP2/AAC/PCM/FLAC/WMA
Model No.: K8
EN
HDMI1
HDMI2
AV
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
⓭
❶. Power ❷. Arrow Keys ❸. Confirm
❹. Menu Button ❺. Back ❻. Focus Ring
❼. Keystone Correction ❽/❾. USB Ports ❿/⓫. HDMI Ports
⓬. AV Port ⓭. 3.5mm Headphone jack
Note:
please refer to the product appearance, this figure is
for reference only.
MS
Power
Menu
All-round menu key
SET
VOL-
Play Pause key
HOME
Arrow button
Mute
Source
VOL+
BACK
EN
INSTALLATION
Install 2 pieces of AAA batteries(not included) into the remote before using
it, do not combine new batteries with old ones in remote control, which can
cause operation failure due to insufficient power supply.
When using the remote control, please make sure that the signal transmit-
ter of the remote control aims at infrared signal of the projector.
When you are not using the remote control for a long period. Please take
out the batteries to prevent it from leakage.
1.
2.
3.
Note:
1. Installation Method
The projector can be hanged on the ceiling with special hanger frame, and
placed on the stable desk to project the image according to the operating
environment and requirements. In addition, the projector can be installed with
following methods:
1.Front projection Ceiling mount
3.Front projection Table mount
2.Rear projection Ceiling mount
4.Rear projection Table mount
Keep the projector at a height where its lens is axial symmetry to the screen. If
this is not possible, use the keystone correction function to adjust the projection
image.
EN
Aspect Ratio: 16:9t
Distance
1.6m
2m
2.5m
3m
3.5m
4m
4.5m
5m
6m
Screen Size
49”
60”
75”
93”
109’’
125’’
141’’
157’’
300’’
* The image size depends on the distance between projector and screen.
there may be 3% measure difference among above listed data.
* The recommended projection distance is 2.5-3m.
* Ambient darkness will improve the clarity of the projected images.
2. Install on the Ceiling
Keep the projector vertical and towards the mid of projector screen, keep the
projection image flat on the screen.
1.To adjust the tilt base, unscrew the support rod at the bottom of the projector,
see below picture.
2.For Ceiling mount, there are 4 holes at the bottom of the projector (M4*10mm).
Please slowly unscrew the 4 black rubbers, then you can find the holes for ceiling
mount, see below picture.
NOTE: The hanging bracket or ceiling mount stand is not packaged.
Screwholes
EN
STARTING PROJECTOR
IMAGE ADJUSTMENT
1)Press the power key on the remote or projector, the indicator light will turn
green;
2)Adjust the focus ring on the right side of the projector to get the best image
performance; (If it is still blurry, please try to adjust the projection distance.
3)Use the 4D keystone function of the projector to get a rectangle projection
screen;
4)Connect the external device (Smart phone, iPad, Amazon Fire TV, TV box,
DVD player, Computer, etc.in the corresponding interfaces of the projector,
please be sure to select the corresponding source. If you do not select the
correct source, the projector will not be able to detect the signal;.
5)Select the " " menu,enter the [ Language],then you can set your
preferred language.
When using the projector for the first time, it normally displays an unclear
image. This is due to the lens being out of focus or the incorrect trapezoid
setting.
Please follow the below steps to correct:
Focusing
Keystone Correction
1.Focus Adjustment
EN
SETTING UP THE PROJECTOR
Rotate the focus ring or lens slowly. At the same time, check the focus point
carefully. The best focus point for the lens would be where the image most
clear.
Note: If it is still blurry, please try to adjust the projection distance.
2.Digital 4D Keystone Correction.
Use the digital 4d keystone correction of the projector to change the image to
be rectangle(vertical and horizontal). Detail please refer the page（未定））of
this manual.
The projector's home page is as follow.
1. Select The Input Signal Source
Select the desired input signal source (HDMI1/HDMI2/AV) on the home-page
EN
2.USB Disk Input Mode
2.1.Play Movie/Music/Photo/Office Suite in the USB Disk Input Mode
1).Input the USB Disk;
2).Select the option [Video/Music/Picture/Office ]
3).Select the desired file (or folder to enter the sub folder) in the USB disk, then
press the [ OK ] button to play it.
USB
3.WiFi Setting
Wireless Connection
Warming Tips:
①The fluency of screen mirroring with wireless connection will be affected by
the network environment. A bandwidth of 100Mbit or more is recommended
when using screen mirroring.
②Make sure your mobile device is close to the projector when using wireless
connection. A distance within 1 meter is recommended.
③Some mobile devices may not support screen mirroring due to the compati-
bility.
④Any questions, please feel free to email WiMiUS via [email protected].
3.1.iOS Cast (for iOS Devices)
1.Go to home page -- Select the [ ] menu -- Select the [ WiFi ] menu
-- Open the WiFi function -- Select your home WiFi from the list -- Connect the
K3 projector to your home WiFi.
EN
Table of contents
Other Wimius Projector manuals
