WilTec 50723 How to use

© by WilTec Wildanger Technik GmbH Seite 1

http://www.wiltec.info

Short Manual Deep Well Pump

Replacing the Pump Shaft

Article number 50723 / 50725 / 50726

© by WilTec Wildanger Technik GmbH Seite 2

http://www.wiltec.info

Thank you for buying our product.

The following pictures provide guidance on installing, respectively replacing the pump

shaft of our deep well pumps.

First remove the 4 long screws and both lugs at the top of the pump housing. Now

you can open the pump and remove underlying silicone cover.

© by WilTec Wildanger Technik GmbH Seite 3

http://www.wiltec.info

Pull up the shaft guiding piece / wheel (Wellen-Führungskörper), now you can lift

(take off) the whole upper part of the pump body.

By using a 13 spanner the pump shaft can be removed/releases from its holder.

(Left-hand thread)

When fitting (installing) the new shaft, always ensure that all parts should be

reassembled as illustrated in the photos, otherwise the pump can be irreparably

damaged.

This manual suits for next models

2

Table of contents

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual

STA-RITE

STA-RITE ST33APP owner's manual