Wilo Stratos PICO User manual

4 217 736-Ed.01 / 2017-05

Wilo-Stratos PICO

Pioneering for You

en Installation and operating instructions

fr Notice de montage et de mise en service

it Istruzioni di montaggio, uso e manutenzione

sv Monterings- och skötselanvisning

da Monterings- og driftsvejledning

 Asennus- ja käyttöohje

pl  Instrukcjamontażuiobsługi

ru  Инструкцияпомонтажуиэксплуатации

tr  Montajvekullanmakılavuzu

Fig.1:

Fig. 2a: Fig. 2b:

H max

½ H

H min

H max

H min

Fig. 3: Fig. 4b:

PE NL

Fig. 4a: Fig. 4c:

Fig. 4d: Fig. 4e:

Fig. 4f: Fig. 5:

en Installation and operating instructions 3

fr Notice de montage et de mise en service 22

it Istruzioni di montaggio, uso e manutenzione 43

sv Monterings- och skötselanvisning 63

da Monterings- og driftsvejledning 81

fi Asennus- ja käyttöohje 100

pl Instrukcja montażu i obsługi 119

ru Инструкция по монтажу иэксплуатации 139

tr Montaj ve kullanma kılavuzu 161

Installation and operating instructions Wilo-Stratos PICO 3

English

Installation and operating instructions

1 General

About this document

The language of the original operating instructions is German.

All other languages of these instructions are translations of the

original operating instructions.

These installation and operating instructions are an integral

part of the product. They must be kept readily available at the

place where the product is installed. Strict adherence to these

instructions is a precondition for the proper use and correct

operation of the product.

The installation and operating instructions correspond to the

relevant version of the product and the underlying safety regu-

lations and standards valid at the time of going to print.

EC declaration of conformity:

A copy of the EC declaration of conformity is a component of

these operating instructions.

If a technical modification is made on the designs named there

without our agreement or the declarations made in the instal-

lation and operating instructions on product/personnel safety

are not observed, this declaration loses its validity.

2Safety

These operating instructions contain basic information which

must be adhered to during installation, operation and mainte-

nance. For this reason, these operating instructions must with-

out fail be read by the service technician and the responsible

specialist/operator before installation and commissioning.

It is not only the general safety instructions listed under the

main point “safety” that must be adhered to but also the special

safety instructions with danger symbols included under the fol-

lowing main points.

English

4WILO SE 05/2017

2.1 Indication of instructions in the operating instructions

Symbols:

General danger symbol

Danger due to electrical voltage

Note:

Signal words:

DANGER!

Acutely dangerous situation.

Non-observance results in death or the most serious of injuries.

WARNING!

The user can suffer (serious) injuries. “Warning” implies that

(serious) injury to persons is probable if this information is

disregarded.

CAUTION!

There is a risk of damaging the product/unit. “Caution”

implies that damage to the product is likely if this informa-

tion is disregarded.

Note: Useful information on handling the product. It draws

attention to possible problems.

Information applied directly to the product, such as:

• direction of rotation arrow,

•identifiers for connections,

• name plate,

• and warning sticker,

must be strictly complied with and kept in legible condition.

Installation and operating instructions Wilo-Stratos PICO 5

English

2.2 Personnel qualifications

The installation, operating and maintenance personnel must

have the appropriate qualifications for this work. Area of

responsibility, terms of reference and monitoring of the per-

sonnel are to be ensured by the operator. If the personnel are

not in possession of the necessary knowledge, they are to be

trained and instructed. This can be accomplished if necessary

by the manufacturer of the product at the request of the oper-

ator.

2.3 Danger in the event of non-observance of the safety

instructions

Non-observance of the safety instructions can result in risk of

injury to persons and damage to the environment and the prod-

uct/unit. Non-observance of the safety instructions results in

the loss of any claims to damages.

In detail, non-observance can, for example, result in the follow-

ing risks:

• danger to persons from electrical, mechanical and bacteriolog-

ical influences,

• damage to the environment due to leakage of hazardous mate-

rials,

• property damage,

• failure of important product/unit functions,

• failure of required maintenance and repair procedures.

2.4 Safety consciousness on the job

The safety instructions included in these installation and oper-

ating instructions, the existing national regulations for accident

prevention together with any internal working, operating and

safety regulations of the operator are to be complied with.

English

6WILO SE 05/2017

2.5 Safety instructions for the operator

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that they do not play

with the appliance.

• If hot or cold components on the product/the unit lead to haz-

ards, local measures must be taken to guard them against

touching.

• Guards protecting against touching moving components (such

as the coupling) must not be removed whilst the product is in

operation.

• Leakages (e.g. from a shaft seal) of hazardous fluids (e.g. explo-

sive, toxic or hot) must be led away so that no danger to persons

or to the environment arises. National statutory provisions are

to be complied with.

• Danger from electrical current must be eliminated. Local direc-

tives or general directives [e.g. IEC, VDE etc.] and local energy

supply companies must be adhered to.

2.6 Safety instructions for installation and maintenance work

The operator must ensure that all installation and maintenance

work is carried out by authorised and qualified personnel, who

are sufficiently informed from their own detailed study of the

operating instructions.

Work to the product/unit must only be carried out when at a

standstill. It is mandatory that the procedure described in the

installation and operating instructions for shutting down the

product/unit be complied with.

Immediately on conclusion of the work, all safety and protec-

tive devices must be put back in position and/or recommis-

sioned.

Other manuals for Stratos PICO

Table of contents

Languages:

Other Wilo Water Pump manuals

Wilo

Wilo Rexa UNI Series User manual

Wilo

Wilo Actun OPTI-QS Series User manual

Wilo

Wilo TOP-S User manual

Wilo

Wilo DrainLift TMP 32-0,5.1 User manual

Wilo

Wilo Stratos User manual

Wilo

Wilo Drain MTS 40 Series User manual

Wilo

Wilo RP Series User manual

Wilo

Wilo Stratos ECO Series User manual

Wilo

Wilo Atmos GIGA-NHT User manual

Wilo

Wilo Atmos TERA-SCH User manual

Wilo

Wilo VeroLine-IP-E User manual

Wilo

Wilo MVIL Series User manual

Wilo

Wilo Initial JET User manual

Wilo

Wilo Atmos GIGA-I User manual

Wilo

Wilo RexaBloc RE User manual

Wilo

Wilo Wilo-Drain STS 40 Series User manual

Wilo

Wilo Stratos GIGA2.0-I User manual

Wilo

Wilo Atmos TERA SCH 150-555 User manual

Wilo

Wilo HELIX-V 22-36-52 User manual

Wilo

Wilo Yonos MAXO-D User manual

Wilo

Wilo Wilo-EMU FA Series User manual

Wilo

Wilo Drain MTC 32 User manual

Wilo

Wilo Star-Z NOVA T User manual

Wilo

Wilo Rexa FIT Series User manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual