Wilcox BOSS-Xe User manual
Operator’s and Maintainer’s Manual
for the
Fire Control System
PN: 64000G10
21 January, 2021 64000M05 Rev. A-1
You are required to thoroughly read all instructions and product safety
information in the BOSS-Xe Operator’s Manual before using this
product. FAILURE TO COMPLY WITH PROPER INSTRUCTIONS COULD RESULT
IN PROPERTY DAMAGE, INJURY AND/OR DEATH. Wilcox is not responsible
for damages resulting from improper use and/or maintenance. Customers
may obtain a copy of the Manual by contacting Wilcox Customer Service at
603-431-1331.
This manual and product contain technical data as defined in the
International Traffic in Arms Regulations ITAR 22 CRF 120.10. Export of
this material is restricted by the Arms Export Control Act 22 U.S.C. 2751
et seq. and may not be exported to foreign persons without prior written
approval from the U.S. Department of State.
WARNING
64000M05 ii Rev. A-1
Operator’s and Maintainer’s Manual for the
Table of Contents ............................................................................. ii
Table of Tables ..................................................................................iv
Table of Illustrations...........................................................................iv
Preface .........................................................................................vi
Operator's Manual to Software Version Cross-Reference.........vii
Safety Summary ................................................................................viii
S1 - Laser Radiation Output Parameters.....................................xiv
SECTION 1 - OVERVIEW
1.1 General Safety Warnings ..............................................1
SECTION 2 - INTRODUCTION
2.1 Product Description .......................................................3
2.2 List of
BOSS-Xe
Major Components...........................4
2.3 List of
BOSS-Xe
Subcomponents and Features........5
2.4 Description of
BOSS-Xe
Major Components .............9
2.5 Description of
BOSS-Xe
Sub-Components.............. 10
2.6 Technical Data.............................................................. 19
SECTION 3 - OPERATION
3.1 Mounting and Dismounting the
BOSS-Xe
................ 20
3.2 Boresight Procedure (Establishing Theoretical
Zero with a Laser Boresight Kit) .............................. 22
TABLE OF CONTENTS
Para. No. Title Page
64000M05 iii Rev. A-1
Operator’s and Maintainer’s Manual for the
3.3 Operating the
BOSS-Xe
.............................................. 26
3.3.1 Performing Daytime Engagement
with the
BOSS-Xe
........................................................ 27
3.3.2 Performing Nighttime Engagement
with the
BOSS-Xe
........................................................ 28
3.3.3 Performing Engagements with the
BOSS-Xe
Powered Off.................................................................. 30
3.3.4 Activating the Panic Alert .......................................... 31
SECTION 4 - MAINTENANCE
4.1 Care of the
BOSS-Xe
.................................................. 32
4.2 Battery Replacement .................................................. 34
4.3 Inspecting and Replacing O-Rings ............................ 37
4.4 Storage.......................................................................... 39
4.5 Shipping......................................................................... 39
APPENDIX A - WARRANTY STATEMENT
A.1 Standard Limited Warranty....................................... 40
A.2 Warranty Claim and Service Information................ 41
APPENDIX B - ABBREVIATIONS
B.1 Abbreviations................................................................ 43
APPENDIX C - SPARE PARTS
TABLE OF CONTENTS (CONT'D)
Para. No. Title Page
64000M05 iv Rev. A-1
Operator’s and Maintainer’s Manual for the
C.1 Spare Parts List........................................................... 44
S1-1
BOSS-Xe
System Laser Safety Parameters............xiv
2.5-1 Button Operations (by Mode) .................................... 12
2.5-2 Mode Operations Tree ................................................ 13
2.5-3 Reticle Shape Selection Switch Position Options... 13
2.6-1
BOSS-Xe
Technical Data ............................................ 19
3.2-1
BOSS-Xe
(64000G10) Boresight Chart.................. 25
3.5-1 Iron Sights (Rear View)............................................... 30
4.2-1 Replacing the Battery in the
BOSS-Xe
..................... 35
4.2-2 Replacing the Processor Clock Battery
in the
BOSS-Xe
............................................................. 36
4.3-1 Inspecting and Replacing O-Rings ............................ 38
TABLE OF ILLUSTRATIONS
Fig. No. Title Page
S1-1 Laser Safety Labels......................................................xiv
2.2-1 Major Component Identification ...................................4
2.3-1 Subcomponent Identification
-
BOSS-Xe
(1 of 4) .........................................................5
2.3-2 Subcomponent Identification
-
BOSS-Xe
(2 of 4) .........................................................6
TABLE OF TABLES
Table No. Title Page
64000M05 v Rev. A-1
Operator’s and Maintainer’s Manual for the
2.3-3 Subcomponent Identification
-
BOSS-Xe
(3 of 4)......................................................... 7
2.3-4 Subcomponent Identification
-
BOSS-Xe
........................................................................ 8
2.3-5 Cleaning Kit Identification
-
BOSS-Xe
(4 of 4)......................................................... 8
2.5-1 Control Pad Functionality ........................................... 12
3.2-1
BOSS-Xe
(64000G10) Boresight Chart ................. 25
3.5-1 Iron Sights (Rear View) .............................................. 30
4.2-1 Replacing the Battery in the
BOSS-Xe
.................... 35
4.2-2 Replacing the Clock Battery in the
BOSS-Xe
.......... 36
4.3-1 Inspecting and Replacing O-Rings ............................ 38
TABLE OF ILLUSTRATIONS (CONT’D)
Fig. No. Title Page
64000M05 vi Rev. A-1
Operator’s and Maintainer’s Manual for the
PREFACE
1. SCOPE. The purpose of this Operator’s Manual is to assist
the operator in the operation and maintenance of the
BOSS-Xe.
The information in this manual should not replace the experience
of a trained operator. Keep this manual and all safety instructions
for future use. The information must be provided to each product
user.
2. REPORTING EQUIPMENT IMPROVEMENT
RECOMMENDATION. Wilcox requests that all errors, omissions,
and discrepancies be forwarded to the Program Management
Department, Wilcox Industries, Corp., One Wilcox Way,
Newington, NH 03801. To submit feedback by e-mail, visit
www.wilcoxind.com
.
© 2020-2021 Wilcox Industries Corp. All rights reserved. Printed in USA. US
Patents. 9,752,853, 10,086,527, 10,557,687, 10,581,214, and 10,175,029.
Additional US and foreign patents pending.
Wilcox
®
and the Wilcox “X” Logo are
federally registered trademarks of Wilcox Industries Corp.
U.S.
BOSS-Xe
TM
is a
trademark of Wilcox Industries Corp. All other trademarks and registered
trademarks in this manual are the property of their respective companies.
Specifications and other data are subject to change without notice.
64000M05 vii Rev. A-1
Operator’s and Maintainer’s Manual for the
OPERATOR’S MANUAL
TO SOFTWARE VERSION CROSS-REFERENCE
When utilizing any version of the
BOSS-Xe
software, it is
critical to reference the correct version of the Operator’s
Manual for the software you are using. The following table
provides a cross-reference for tracking Operator’s Manual
release revision numbers to software revision releases.
Manual Rev. Covers Software Rev.
A-1 02.00
64000M05 viii Rev. A-1
Operator’s and Maintainer’s Manual for the
SAFETY SUMMARY
WARNING and CAUTION statements have been strategically
placed throughout the text to indicate operating or
maintenance procedures, practices, or conditions considered
essential to the protection of personnel (WARNING) or
equipment and property (CAUTION). NOTES emphasize
necessary and important data. CAUTIONS and NOTES appear
in the text as applicable. Definitions for WARNINGS,
CAUTIONS and NOTES are as follows:
Highlights an operation or maintenance procedure, practice,
condition, statement, etc., which, if not strictly observed,
could result in injury to or death of personnel.
Highlights an operating or maintenance procedure, practice,
condition, statement, etc., which, if not strictly observed,
could result in damage to, or destruction of, equipment or
loss of mission effectiveness.
Highlights an essential operating or maintenance procedure,
condition or statement.
WARNING
CAUTION
NOTE
64000M05 ix Rev. A-1
Operator’s and Maintainer’s Manual for the
Laser Safety
The BOSS-Xe features a Class 3B laser product which emits
visible and infrared laser radiation from the front end of the
device. Both visible and infrared laser light can be dangerous
if misused. Laser light reflected or refracted off mirrored
surfaces may be equally harmful.
Never stare into a laser.
Never point lasers at someone’s eyes.
Do not aim lasers at personnel or mirrored surfaces.
Do not look at a laser through telescopes, binoculars, scopes,
image intensifiers, etc.
Never point the lasers at other persons as Class 3B lasers may
cause skin irritation.
Direct eye exposure to a laser may cause permanent eye damage,
including blindness. Laser protective eyewear with OD 2.0
protection for filtering laser light must be used if protection from
laser radiation is required.
Visible and infrared laser beams are more visible when used
in smoke, fog and rain, making them more easily detectable
by onlookers or observers. When used in these
environments, prolonged activation of the lasers should be
avoided.
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Operation without the Blue High Power Lock Out Screw
allows the RAPTAR-S to function in High Power mode. High
Power mode increases laser radiation which can cause
injury.
WARNING
This manual suits for next models
1
Table of contents
Popular Firefighting Equipment manuals by other brands
Tyco Fire Protection Products
Tyco Fire Protection Products AM31 AQUAMIST Nozzle instructions
Task Force Tips
Task Force Tips Extend-A-Gun RC3 INSTRUCTION FOR SAFE INSTALLATION, OPERATION, AND MAINTENANCE
Autronica
Autronica AutroSafe BSD-321/EX manual
POK
POK Froggy user manual
Waterous
Waterous AQUIS Series Installation, operation and maintenance instructions
CTP
CTP NPO ETERNIS GUARANT-7 Technical description and instruction manual
