Wet Sounds STEALTH-XT User manual
STEALTH-XT
Powersport Soundbar
Owner’s Manual
Wet Sounds Stealth XT Soundbar Owner’s Manual
Thank you for choosing this Wet Sounds™product!
Wet Sounds’ products are designed and crafted to achieve or exceed
the highest performance standards in the industry. We build every
soundbar with unsurpassed passion as well, so we can deliver the highest
performing products to you. We live and breathe high performance audio
so you can enjoy the very best audio experience wherever you go.
The Stealth Series soundbars are designed to give every ATV, UTV, Golf
Cart, Boat, and vehicle in your garage the ability to ride with a loud, live,
and clear high performance audio solution.
Please take a moment to read the instruction manual before starting
your installation. This guide will explain the benets of the technologies
developed by Wet Sounds and will help you understand the correct
installation methods and use of this product. If you have any questions
or concerns, please contact a certied Wet Sounds dealer. You may also
contact Wet Sounds technical support by dialing 1-877-WET-SPKR
(1-877-938-7757).
Congratulations!
Wet Sounds Stealth XT Soundbar Owner’s Manual
2
Table of Contents
Please take a moment to look over this instruction manual
before enjoying the product.
Soundbar Features & Specications .....................................
Included Products ...................................................................
Optional Accessories ..............................................................
Soundbar Dimensions ..........................................................
Installation Specications ......................................................
Wiring Diagram .......................................................................
Control Panel Functions .........................................................
Remote Functions ..................................................................
Audio Source Connection ..............................................
Factory Reset & Remote Paring ...........................................
RGB Modes .............................................................................
Limited Warranty ....................................................................
3
4
4
5-6
7
8
9
10
11-12
12
13
14
Wet Sounds Stealth XT Soundbar Owner’s Manual
3
• Weatherproof rated for all outdoor marine and powersports applications
• Advanced DSP-controlled Class-D amplier delivering clear sound, improved
mid-bass and low-end bass response
• Built-in Bluetooth®connectivity with source control
• Sync multiple XT soundbars to share audio
• Backlit control panel & RGB accent lights with 12 color modes
• Integrated LED dome light
• Complete power/ground wire harness with in-line 20A fuse
• 3.5 AUX Input for a wired connection
• 3.5mm line output (2V) to connect an additional external amplier and
speakers.
• IP67 rated RF wireless remote
• Universal L-brackets and spacers with hardware included
• Wet Sounds patented Fast Track sliding mount system
Stealth XT 6 Specs:
• 4 marine-rated 3” full range drivers
• 2 marine-rated 1” tweeters
Stealth XT 8 Specs:
• 6 marine-rated 3” full range drivers
• 2 marine-rated 1” tweeters
Stealth XT 12 Specs:
• 8 marine-rated 3” full range drivers
• 4 marine-rated 3/4” tweeters
All Stealth XT Soundbars:
• 600W Class D Amplier
• Frequency: 40Hz - 20kHz
• Max Current Draw: 15 amps
• Operating Voltage: 10V - 16V
• Bluetooth®Enabled with broadcasting connectivity
• IP Rated: IP67
• Length: XT 12: 33.74” XT 8: 26.85” XT 6: 21.31”
• Width: 4.04”
• Height: 3.85”
Stealth XT Soundbar Features
Stealth XT Soundbar Specications
21.5”4”
3.85”
27”
34”
Included Products
Optional Accessories
• (x4) Hex-nuts
• (x4) Large at washers
• (x2) Lock washers
• Stealth XT soundbar
• RF remote controller
• Steering wheel cradle
• (x2) L-brackets
• (x2) Spacers
• (x2) Button Hex-head M8 x 25mm bolts
• (x4) Button Hex-head M8 x 45mm bolts
(x1) Stealth Soundbar
(x2) L-Brackets
(x4) Hex-nuts
(x1) Remote
(x1) Steering wheel cradle(x2) Spacers
(x2) M8 x 25mm(x4) M8 x 45mm
(x4) Large Flat Washers
(x2) Lock washers
Wet Sounds Stealth XT Soundbar Owner’s Manual
4
Square Clamps:
• Stealth Clamp square 1.25” (ST-ADP-SQ 1.25)
• Stealth Clamp square 1.0” (ST-ADP-SQ 1.0)
• Stealth Clamp Square .75” (ST-ADP-SQ .75)
Round Clamps:
• Stealth Clamp Round 2.0” (ST-ADP-RND 2.0)
• Stealth Clamp Round T 2.0” (ST-ADP-RND 2.0T)
• Stealth Clamp Round 1.75” ( ST-ADP-RND 1.75)
• Stealth Clamp Round 1.5” (ST-ADP-RND 1.5)
Slider Bracket:
• Stealth Slider Bracket (ST-ADP-SLIDER BRACKET)
Please visit wetsounds.com for more information on Stealth XT accessories.
Stealth XT Dimensions
All Stealth XT models share the same height and depth, but length varies among
models. Reference the image and chart below:
The chart below shows soundbar dimensions with the L-Bracket installed in (A)
short conguration with no spacer, (B) short conguration with spacer, (C) long
conguration with no spacer, and (D) long conguration with spacer.
Soundbar dimensions with L-Bracket:
Left View
Stealth XT 6
23.34” 28.87” 35.76”
25.07” 30.60” 37.49”
24.16” - 26.85” 29.63” - 32.32” 36.52” - 39.21”
25.90” - 28.58” 31.36” - 34.05” 38.25” - 40.94”
Stealth XT 8 Stealth XT 12
A
B
C
D
3.85”
4”
26.85”
21.31”
33.74”
Front View
XT 6
XT 8
XT 12
Wet Sounds Stealth XT Soundbar Owner’s Manual
5
RGB
RGB
RGB
RGB
Conguration C: L-Bracket, No Spacer
Conguration D: L-Bracket, with Spacer
C
D
Conguration A: L-Bracket, No Spacer
Conguration B: L-Bracket, with Spacer
A
B
Wet Sounds Stealth XT Soundbar Owner’s Manual
6
Mounting Instructions:
Wiring Instructions:
1. Find the mounting location and determine which conguration to install the
provided L-Bracket. Please reference pages 5-6 for the different congurations.
Fasten the L-Bracket to the soundbar loosely.
If installing on a gas vehicle:
If installing on a electric vehicle:
1. Carefully remove the Positive (+) then Negative (-) battery wires.
2. Carefully remove the Positive (+) then Negative (-) battery wires.
1. Switch the electric vehicle into Tow Mode under the seat.
*If using a 16V or higher battery system, a DC-DC converter is required.
2. Hold the L-Bracket in place on the soundbar when using conguration A or B.
Take an M8 x 45mm bolt (25mm if not using a spacer) using a at washer and
lock washer and loosely fasten the L-Bracket to the soundbar. When mounting
in conguration C or D, do not use a at washer when fastening the L-Bracket
to the soundbar. We recommend using threadlocker on these bolts.
2. Connect the Negative (Black) wire to the Negative (-) battery terminal and the
Positive (Red) wire to the Positive (+) battery terminal.
3. Connect the Negative (Black) wire to the Negative (-) terminal and the Positive
(Red) wire to the Positive (+) terminal on the DC-DC converter.
3. Ensure the soundbar is in the desired location, then use the additional M8 x
45mm bolt and tighten it in place using the hex-nuts provided. We recommend
using threadlocker on these bolts.
4. Route the blue AUX Input cable to a desired location.
5. Route the blue AUX Input cable to a desired location.
5. Optional: Route and connect the blue Remote Wire and the blue Signal
Output cable to an additional amplier or Stealth AS subwoofer.
6. Optional: Route and connect the blue Remote Wire and the blue Signal
Output cable to an additional amplier or Stealth AS subwoofer.
4. Adjust the soundbar in the proper orientation and tighten it in the desired
position.
3. Reinstall the Positive (+) then Negative (-) battery wires.
4. Reinstall the Positive (+) then Negative (-) battery wires.
7. Switch back into Run Mode.
Installation Specications
Wet Sounds Stealth XT Soundbar Owner’s Manual
7
Stealth XT Soundbar Wiring Diagram
Wet Sounds Stealth XT Soundbar Owner’s Manual
8
*Products not included
Additional Amplier & Speakers*
Stealth AS Subwoofer*
Media Device*
Battery*
Power
20A Fuse
Signal Output
AUX Input
Ground
Remote Wire
21.5”4”
3.85”
27”
34”
Control Panel Functions
2. Dome Light
8. Play/Pause
4. RGB Switch
3. Track Back
7. Track Forward
5. Volume Down 6. Volume Up
1. Power/AUX 9. Bluetooth®/Broadcast
Wet Sounds Stealth XT Soundbar Owner’s Manual
9
Power/AUX: Long press (3 sec) to turn the soundbar ON or OFF. Short press to
enter AUX mode ( icon red). For additional instructions reference page 11.
1.
2. Dome Light: Short press to turn the dome light ON or OFF.
3. Track Back: Short press for the previous track.
4. RGB Switch: A long press will turn the RGB accent lights ON or OFF. Short press
the RGB switch to toggle RGB modes. For additional RGB mode instructions
reference page 13.
5. Volume Down: Short press to lower the soundbar volume.
6. Volume Up: Short press to increase the soundbar volume.
7. Track Forward: Short press to skip the current track.
8. Play/Pause: Short press to play/pause the current track.
9. Bluetooth®/Broadcasting: Short press to enter Bluetooth®pairing mode( icon
blue). Enter broadcasting mode by long pressing (LP) the Bluetooth®icon for 3
sec ( icon green). For additional instructions reference page 11-12.
This manual suits for next models
3
Table of contents
Other Wet Sounds Speakers System manuals
Popular Speakers System manuals by other brands
Sondpex
Sondpex Active Speaker System and Digital Music... User manual and installation instructions
JVC
JVC NX-PN7 instructions
Marshall Amplification
Marshall Amplification AR-DM61-BT user manual
Yamaha
Yamaha NX-A01 - Speaker Sys Product bulletin
SE Audiotechnik
SE Audiotechnik I-LINE manual
Gemini
Gemini WRX-843 Series user manual