Weslo WLEL2947.0 User manual

CAUTION

Read all precautions and

instructions in this manual

before using this equipment.

Keep this manual for future

reference.

Model No. WLEL2947.0

Serial No.

Serial

Number

Decal

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if parts are

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

(closed on holidays)

ON THE WEB:

www.wesloservice.com

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

USER'S MANUAL

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WESLO is a registered trademark of ICON IP, Inc.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precau-

tions before using the elliptical exerciser.

1. Read all instructions in this manual and all

warnings on the elliptical exerciser before

using the elliptical exerciser.

2. It is the responsibility of the owner to ensure

that all users of the elliptical exerciser are

adequately informed of all precautions.

3. The elliptical exerciser is intended for

home use only. Do not use the elliptical

exerciser in a commercial, rental, or institu-

tional setting.

4. Keep the elliptical exerciser indoors, away

from moisture and dust. Place the elliptical

exerciser on a level surface, with a mat

beneath it to protect the floor or carpet.

Make sure that there is enough clearance

around the elliptical exerciser to mount, dis-

mount, and use it.

5. Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

6. Keep children under 12 and pets away from

the elliptical exerciser at all times.

7. The elliptical exerciser should not be used

by persons weighing more than 250 pounds.

8. Wear appropriate exercise clothes while

using the elliptical exerciser. Always wear

athletic shoes for foot protection while exer-

cising.

9. When mounting and dismounting the ellipti-

cal exerciser, always hold the upper body

arms and step onto and off the pedal that is

in the lowest position.

10. The pulse sensor is not a medical device.

Various factors may affect the accuracy of

heart rate readings. The pulse sensor is

intended only as an exercise aid in determin-

ing heart rate trends in general.

11. Keep your back straight when using the ellip-

tical exerciser; do not arch your back.

12. If you feel pain or dizziness while exercising,

stop immediately and cool down.

13. When you stop exercising, allow the pedals

to slowly come to a stop.

14. The warning decal shown on page 4 has

been applied to the elliptical exerciser. If the

decal is missing or illegible, call the toll-free

telephone number on the front cover of this

manual and order a free replacement decal.

Apply the decal in the location shown.

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob-

lems. Read all instructions before using. ICON assumes no responsibility for personal injury or

property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Thank you for selecting the new WESLO®FIT BODY

SYSTEM elliptical exerciser. The WESLO FIT BODY

SYSTEM is an incredibly smooth exerciser that

moves your feet in a natural elliptical path, minimizing

the impact on your knees and ankles. Welcome to a

whole new world of natural, elliptical-motion exercise.

For your benefit, read this manual carefully before

you use the elliptical exerciser. If you have ques-

tions after reading this manual, please see the front

cover of this manual. To help us assist you, note the

product model number and serial number before con-

tacting us. The model number is WLEL2947.0. The

serial number can be found on a decal attached to the

elliptical exerciser (see the front cover of this manual).

To avoid a registration fee for any service needed

under warranty, you must register the elliptical

exerciser at www.wesloservice.com/registration.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

FRONT

BACK

RIGHT SIDE

Pedal Arm

Pedal Disc

Side Shield

Leveling Foot

Upright

Water Bottle Holder*

*No water bottle is included

Console

Upper Body Arm

Handgrip Pulse Sensor

Wheel

Pedal

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included hex keys, assembly requires a phillips screwdriver , an adjustable

wrench , and a rubber mallet .

See the drawings below to identify the small parts needed for assembly. The number in parentheses below

each drawing is the key number of the part, from the PART LIST on page 17. The number following the key

number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part

is not in the parts bag, check to see if it has been preassembled.

M8 Split

Washer (79)–4

M8 Washer

(64)–4

M10 Split

Washer (78)–4

M8 x 25mm Patch

Screw (70)–2

M8 x 19mm Patch

Screw (73)–4

M8 Nylon

Locknut (59)–6

M10 Nylon

Locknut (84)–4

M8 x 23mm Button

Screw (65)–4

Large Wave

Washer (20)–4

Wave Washer

(27)–2

M4 x 19mm

Screw (68)–6

M8 Large

Washer (81)–2

Star Washer

(85)–6

M10 x 76mm Button Bolt (74)–2M10 x 60mm Button Screw (67)–2

M10 x 75mm Carriage Bolt (58)–2

M4 x 22mm

Screw (66)–2

M8 x 45mm Button

Bolt (11)–4

M6 x 18mm Patch

Screw (87)–4

ASSEMBLY

Attach the Rear Stabilizer (35) to the Frame (1) with

two M10 x 75mm Carriage Bolts (58) and two M10

Nylon Locknuts (84).

Press the Stabilizer Endcaps (36) onto the Rear

Stabilizer (35) as shown.

2. Attach the Front Stabilizer (3) to the Frame (1) with

two M10 x 76mm Button Bolts (74), two M10 Split

Washers (78), two Concave Spacers (13), and two

M10 Nylon Locknuts (84). Do not tighten the Nylon

Locknuts yet.

Thread two M10 x 60mm Button Screws (67) with

two M10 Split Washers (78) and two Concave

Spacers (13) through the Front Stabilizer (3) and into

the Frame (1). Tighten the M10 Nylon Locknuts

(84), and then tighten the Button Screws.

Orient a Wheel (28) so the four posts (see the inset

drawing) face away from the Front Stabilizer (3).

Attach the Wheel to the Front Stabilizer with an M8

Nylon Locknut (59). Next, press a Wheel Cover (29)

onto the posts on the Wheel. Attach the other Wheel

(not shown) in the same way.

13 78 67

3. While another person holds the Upright (2) near the

Frame (1), connect the Upper Wire Harness (18) to

the Lower Wire Harness (38).

Carefully slide the Upright (2) onto the Frame (1). Be

careful to avoid pinching the Wire Harnesses (18,

38). Attach the Upright with four M8 x 19mm Patch

Screws (73) and four M8 Split Washers (79). Do not

tighten the Patch Screws yet.

3273

4. Identify the Left Pedal Arm (21), which is marked with

a “Left” sticker. Attach a Pedal (19) to the Left Pedal

Arm with three M4 x 19mm Screws (68) and three

Star Washers (85).

Attach the other Pedal (not shown) to the Right

Pedal Arm (not shown) in the same way.

Posts

To make assembly easier, read the information

on page 5 before you begin assembling the

elliptical exerciser.

5. Apply a small amount of the included grease to a

Wave Washer (27) and slide it onto one end of the

Pivot Axle (16). Next, slide an M8 Washer (64) and a

Pivot Cover (14) onto an M8 x 23mm Button Screw

(65), and tighten the Button Screw into the Pivot Axle.

Apply a generous amount of grease to the Pivot Axle

(16). Identify the Left and Right Upper Body Legs (6,

7), which are marked with “Left” and “Right” stickers.

While another person aligns the Left and Right Upper

Body Legs with the Upright (2) as shown, insert the

Pivot Axle into the Upper Body Legs and the Upright.

Be careful not to damage the Upper Wire Harness

(18) with the Pivot Axle.

Apply a small amount of grease to a Wave Washer

(27), and place it on the end of the Pivot Axle (16).

Next, slide an M8 Washer (64) and a Pivot Cover (14)

onto an M8 x 23mm Button Screw (65), and tighten

the Shoulder Screw into the Pivot Axle. Make sure

that the Wave Washer remains on the end of the

Pivot Axle.

6. Apply a generous amount of grease to the axle on

the Left Upper Body Leg (6). Then, apply grease to a

Large Wave Washer (20) and slide it onto the axle.

Apply a generous amount of grease to the Left

Crank Arm (42). Orient a Crank Arm Spacer (45) so

the flat side is facing away from the Left Crank Arm,

and slide the Crank Arm Spacer onto the Left Crank

Arm.

Slide the Left Pedal Arm (21) onto the Left Upper

Body Leg (6) and the Left Crank Arm (42).

Repeat this step for the other side of the elliptical

exerciser.

Grease

7. Attach the Left Pedal Arm (21) to the Left Upper Body

Arm (6) with an M8 x 23mm Button Screw (65), an

M8 Washer (64), and a Pedal Leg Cover (23).

Apply grease to a Large Wave Washer (20) and

slide it onto the Left Crank Arm (42). Then, attach the

Left Pedal Arm (21) to the Left Crank Arm with an

M8 x 25mm Patch Screw (70) and an M8 Large

Washer (81).

See step 3. Tighten the four M8 x 19mm Patch

Screws (73).

Grease

10. Insert the Left Upper Body Arm (4) into the Left Upper

Body Leg (6) and attach it with two M8 x 45mm Button

Bolts (11) and two M8 Nylon Locknuts (59). Make sure

that the Nylon Locknuts are in the hexagonal holes

in the Left Upper Body Leg.

Repeat this step for the Right Upper Body Arm (5)

and the Right Upper Body Leg (7).

Hexagonal

Holes

910

Wire Harness

Avoid pinching

the wire

harnesses

87 17

9. While another person holds the Console (10) near the

Upright (2), connect the Upper Wire Harness (18) to

the wire harness on the Console.

Attach the Console (10) to the Upright (2) with four

M6 x 18mm Patch Screws (87). Be careful not to

pinch the wire harnesses.

Attach the Water Bottle Holder (17) to the Upright (2)

with two M4 x 22mm Screws (66).

11. Make sure that all parts of the elliptical exerciser are properly tightened. Place a mat under the elliptical

exerciser to protect the floor or carpet from damage.

8. The Console (10) requires four “AA” batteries (not

included); alkaline batteries are recommended.

Remove the battery cover from the Console and

insert four batteries into the Console. Make sure that

the batteries are oriented as shown by the dia-

gram inside the battery compartment. Then, reat-

tach the battery cover.

Batteries

Battery

Cover

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO MOVE AND LEVEL THE ELLIPTICAL

EXERCISER

To move the elliptical exerciser, stand in front of it,

place one foot against one of the wheels, and firmly

hold the upper end of the upright. Pull the upright for-

ward until you can move the elliptical exerciser on the

wheels. Carefully move the elliptical exerciser to the

desired location and then lower it to the floor. To

decrease the risk of injury, do not attempt to move

the elliptical exerciser over an uneven surface.

If the elliptical exerciser rocks slightly on your floor,

turn one or both of the levelling feet under the front

stabilizer until the rocking motion is eliminated.

HOW TO EXERCISE ON THE ELLIPTICAL

EXERCISER

To mount the elliptical exerciser, firmly hold the upper

body arms and carefully step onto the pedal that is in

the lowest position. Then, step onto the other pedal.

Push the pedals until they begin to move with a con-

tinuous motion. Note: The pedal discs can turn in

either direction. It is recommended that you turn

the pedal discs in the direction shown below;

however, for variety, you can turn the pedal discs

in the opposite direction.

To dismount the elliptical exerciser, allow the pedals

to come to a complete stop. The elliptical exerciser

does not have a freewheel; the pedals will contin-

ue to move until the flywheel stops. When the ped-

als are stationary, step off the highest pedal first.

Then, step off the lower pedal.

Pedal

Disc

Upper

Body Arm

Wheel

Upright

Leveling Foot

CONSOLE DIAGRAM

FEATURES OF THE CONSOLE

The console offers a selection of features designed to

make your workouts more effective. When you use the

manual mode of the console, you can change the

resistance of the pedals with the touch of a button. As

you pedal, the console will provide continuous exer-

cise feedback. You can even measure your heart rate

using the built-in handgrip pulse sensor.

The console also offers two aerobic programs that

automatically change the resistance of the pedals and

prompt you to vary your pedaling pace while guiding

you through an effective workout.

The console also features four interactive crosstrainer

programs designed to help you to burn calories and

enhance your cardiovascular system while toning and

strengthening your muscles. The crosstrainer pro-

grams automatically control the resistance of the ped-

als and prompt you to perform a variety of strength

exercises during your workout. Note: The strength

exercises require the use of the included dumbbells.

To use the manual mode of the console, see the

instructions at the right. To use an aerobics program,

see page 12. To use a crosstrainer program, see

page 13.

Before using the console, make sure that batteries are

installed (see assembly step 8 on page 8). If there is a

sheet of clear plastic on the display, remove the plastic.

HOW TO USE THE MANUAL MODE

Turn on the console.

To turn on the console, press the On/Reset button

or begin pedaling. The entire display and the pace

guide will light for a moment; the console will then

be ready for use.

Select the manual mode.

When you turn

on the console,

the manual

mode will be

selected. If you

have selected a

program, rese-

lect the manual

mode by pressing the X Trainer Programs or

Aerobic Programs button repeatedly until the scan

and time indicators appear in the display.

Change the resistance of the pedals as desired.

As you pedal,

change the resis-

tance of the ped-

als by pressing

the Resistance

Increase and

Decrease but-

tons. There are

ten resistance levels. Note: After you press the

buttons, it will take a moment for the pedals to

reach the selected resistance level.

Indicators

Pace

Guide

This manual suits for next models

Table of contents

Other Weslo Elliptical Trainer manuals

Weslo

Weslo Momentum 950 Elliptical User manual

Weslo

Weslo WLEL31808.0 User manual

Weslo

Weslo Boomerang 850 Elliptical User manual

Weslo

Weslo Momentum 620 Elliptical User manual

Weslo

Weslo Momentum 630 Elliptical User manual

Weslo

Weslo Momentum CT 5.9 User manual

Weslo

Weslo WLEL19022 User manual

Weslo

Weslo Momentum Ct5.8 Elliptical User guide

Weslo

Weslo Pro 13.8e Elliptical User manual

Weslo

Weslo Momentum 410 Elliptical System manual

Weslo

Weslo MOMENTUM CT 5.0 User manual

Weslo

Weslo WLTL49907.0 User manual

Weslo

Weslo Momentum Ct5.8 Elliptical User manual

Weslo

Weslo Momentum 405 Elliptical Operating and maintenance manual

Weslo

Weslo Elliptical Glider 2.0 Operating and maintenance manual

Weslo

Weslo Momentum 405 Elliptical User guide

Weslo

Weslo Eclipse 2 Elliptical User manual

Weslo

Weslo Momentum 410 Elliptical User manual

Weslo

Weslo Momentum 410 Elliptical User guide

Weslo

Weslo Boomerang 850 User manual

Weslo

Weslo Momentum 4.0 Elliptical User manual

Weslo

Weslo Skier Plus WLUVSK10160 User manual

Weslo

Weslo Momentum 4.0 Elliptical Quick start guide

Weslo

Weslo Momentum 605 Elliptical User guide

Popular Elliptical Trainer manuals by other brands

Progear Fitness

Progear Fitness Air elliptical pro 1307 owner's manual

Torque Fitness

Torque Fitness XPLLP owner's manual

Octane Fitness

Octane Fitness PRO3700C Operation manual

Xterra

Xterra FS5.8e owner's manual

Bodyguard

Bodyguard E-40 user manual

Bonn Germany

Bonn Germany Concept 2.2 user manual

Precor

Precor Resolute RSL 620 Assembly guide

NordicTrack

NordicTrack E 9.2 Elliptical HASZNALATI UTASITAS

Vision Fitness

Vision Fitness X6600iNetTV Assembly guide

Matrix

Matrix MX-A5x owner's manual

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 owner's manual

Sears

Sears FREE SPIRIT C249 30737 0 owner's manual

True

True FS-64 Assembly manual

Sport-thieme

Sport-thieme ST 310 manual

VIRTUFIT

VIRTUFIT CTR 1.1 user manual

Kettler

Kettler GIRO C 1 manual

CIRCLE FITNESS

CIRCLE FITNESS E7 owner's manual

Reebok

Reebok 1000 Zx Elliptical Manuel de l'utilisateur