Temperature Controller Consoles
Thermal solutions for gas delivery and pump line heating require precise
temperature control. The best process control is achieved through PID
temperature algorithms. A turnkey temperature controller console simplifies
control and installation of the thermal subsystem. The controller consoles have
everything necessary to power and control a gas or pump line including
temperature controllers with advanced PID algorithms with CE and UL®ratings,
solid state switching and fusing.
6 - Temperature Controllers
•Turnkey integrated control package that is tested and ready for installation
•Advanced PID algorithms for precision temperature control
•Solid state relay (SSR) switching for long life
•Semiconductor fusing to protect system
•Regulatory and testing agencies CE, UL®, UL®508, FM, SEMI S2 (contact
factory for agency approvals that apply to each controller console model)
Features
EZ-ZONE PM
panel mount
controllers
EZ-ZONE®PM Panel Mount Controllers
Watlow’s EZ-ZONE®PM panel mount controller offers control options to reduce
system complexity and the cost of thermal loop ownership. The controller is available
as a PID controller, an over/under limit controller or these functions can be combined
into an integrated controller. Other options include integrated high amperage power
controller output with a high-performance PID controller and an over/under limit
controller in one space-saving, panel mount package. A number of serial
communication options are available to support your connectivity needs including
EtherNet/IP™. This controller is available in 1⁄32 or 1⁄16 DIN panel mount packages.
Temperature controller
consoles
•Advanced PID control algorithm including TRU-TUNE®+ adaptive control
•Integrated PID and limit controller for over/under temperature conditions
•Configuration communications with software saves controller setup time
•Serial communication capabilities provides a wide range of protocol choices
including Modbus®RTU, EtherNet/IP™, Modbus®TCP, and DeviceNet™
•High amperage power control output for up to 15 amp resistive loads
•Current monitoring and provides alarm indication of a failed output device or
heater load
•Agency approvals: UL®listed, CSA, CE, RoHS, W.E.E.E. FM, SEMI F47-0200,
Class I, Div. 2 rating on selected models
•Class I, Div. 2 UL®1604 rated for use in hazardous locations
•Sealing system complies to NEMA 4X, IP66 for cleaning and washed down
•Touch-safe package increases safety for installer/operator and complies to IP2X
requirements
•Ramp/soak programming with four files and 40 total steps
Features
