WATCHMARK G-Wear User manual

WWW.WATCHMARK.COM
USER MANUAL

Installing the app 9
Smartwatch functions 10
Music playback
Picture taking
Calorie counter
Sleep monitor
Sports modes
Stopwatch
Respiratory training
Alarm
Weather
Change of dial theme
Connections
Reset to factory settings
Settings
Time, date
Pedometer
Brightness adjustment
Distance travelled
Blood pressure
Heart rate
Saturation
11
12
13
14
15
TABLE OF CONTENTS
Introduction Applications and functions
About the watch 4
Device configuration
Packaging content
Hardware requirements
Charging the watch
Additional information
How to wear
a smartwatch?
7
Belt change 8
5
6

App functions 16
Measurement history
Reminder of movement
Hydration reminder
Alarm clock
Notifications
High heart rate alarm
Auto shut-off screen
G-Sensor
Cycle monitoring
Change of dial theme
Favourite contacts
More settings
Reset to factory settings
17
18
19
TABLE OF CONTENTS
General Information Applications and functions
Specifications 20
Product complaint
Product return
21
Product exchange
22
23

This is a smartwatch that will help you with your active lifestyle.
The metal envelope emphasises its unique design and the intuitive
menu in Polish makes it very easy to use. Thanks to the built-in
microphone and speaker, it is possible to make calls directly from
the smartwatch. The watch has up to 24 sports modes during
which it measures steps, calories burned and distance.
Device configuration
Contents of the package
4
Introduction
About Watchmark G-Wear
Smartwatch (colour and
material may vary depending on
the colour chosen)
Strap (colour and material
may vary depending on the
colour chosen)
Charger (colour and material
may vary depending on the
model selected)

iOS 8.0 and above
Android 5.1 and above
Bluetooth supported: 5.0
Hardware requirements
Charging instructions
This smartwatch uses magnetic charging.
Connect the charging cable to the USB input and to the rear
charging contacts of the device. Once connected, charging will
start automatically and the charging icon will appear on the
screen.
It takes approximately 2 hours to fully charge the battery. Do not
use the watch while it is charging.
Caution: do not connect the magnetic charging cable to any
2 contacts at the same time with conductive material, as this
may cause a short circuit.
Android 5.1+ IOS 8.0+
5

6
Please read the entire user manual carefully before using the
equipment. It is recommended to use only the original battery,
charger and accessories that are included in the kit received
with the device.
Neither the manufacturer nor the distributor is responsible for
the use of third-party accessories.
The functions that are presented in this manual may vary
between models, as the manual is a general description of
smartwatches. Some models may deviate from the standard.
Before using the device for the first time, charge it for a
minimum of 2 hours. Before using the device, you must
download and install the app and accept all consents that the
smartwatch asks for. If this is not done fully, not all features of
the device will be available. The smartwatch will only ask for
access to functions that are necessary for the smartwatch to
function properly.
The company reserves the right to change the content of this
manual.
Additional information

7
How to wear a smartwatch?
The strap for this watch model is 22 mm wide. It is
interchangeable and additional straps can be purchased in
a different colour or material.
Wearing the watch
When you're not exercising, wear the smartwatch as you
would a regular watch, i.e. one finger above your wrist bone.
To take full advantage of the heart rate monitoring function
during exercise, try wearing the device above your wrist
(2 fingers above your wrist bone) to improve comfort and
stability. Many exercises, such as cycling or weightlifting, can
cause the smartwatch's placement to change by bending the
wrist, for example. If the watch sits lower on the wrist bone
measurements can be intermittent, so correct placement
is important.

Belt change
Insert one end of the strap together with the telescope
into the recess of the watch envelope.
With the other end, insert the telescope into the centre of
the cavity and attach it to the watch.
Attach the original strap to the watch before using it. When
carrying out this operation, take careful care and watch out
for your fingernails when attaching the telescopes to the
watch.
1.
2.
Wearing the belt
Removing the belt
With one hand, press the wheel on the telescope and
gently push inwards.
Then, pull upwards until the telescope detaches from the
watch.
1.
2.

After installing the app, turn on Bluetooth on your phone and go
to the app. Create an account or log in anonymously. Allow
access. Then select the middle icon on the bottom bar in the app
and select 'Add device'. Select the K28H. For the app to work
properly, you need to give all the consents the app asks for.
To use the smartwatch to make and receive calls, connect the
watch via Bluetooth as well. On your phone, go to the Bluetooth
settings and establish a connection with the device named
"Audio_K28H". Without such a connection, some of the functions
will not be active.
The app for the G-WEAR smartwatch model is "Da Fit".
Download the app from the Google Play / App Store or via
the QR code below.
9
Google Play App Store
Applications and functions
Installing applications

Features available on the Smartwatch
Time, date
Pedometer
Screen backlight brightness adjustment
Distance travelled
The display shows the time, date and day of the week. The
data is displayed on the main screen of the watch.
Counts the steps taken on a given day (data resets each day
from 00:00). The number of steps taken can be seen in the app
or in the first tab to the right of the main screen.
Adjusting the brightness helps to protect your eyes from a
screen that is too bright at night, to adapt the backlight to the
outdoor situation and to save the watch's battery. You can find
this function in the drop-down menu from the main screen and
select the appropriate display brightness.
Information about the distance covered during the day.
Distance travelled can be found in the first tab to the right of the
main screen after clicking on the steps data.
10
Table of contents
Other WATCHMARK Watch manuals























