Wasp WPA 1200 II User manual
©Copyright 2010 Wasp Barcode Technologies
WPA 1200 II
Quick Start Guide
1
Front Left View
1 Status indicator 5Keypad
2Speaker 6Universal connector
3Power button 7LCD Touch screen
4Microphone 8Left scanner trigger button
8
WPA 1200 II Quick Start Guide
2
Turning ON the WPA 1200 II for the First Time
After you have initially charged your device for about 12 hours, the device is
ready to be used. You can now start up your device where you’ll calibrate the
display, learn some basic stylus usage, and set up the system time zone, date
and time.
Power ON Button
Turn on your device by pressing the power button on the front panel.
Rear View
9 Battery compartment 15 Memory card slot
10 Battery Compartment release latch 16 Barcode scanner window
11 Reset button 17 Earphone jack
12 Handstrap 18 Stylus
13 Speaker 19 Right scanner trigger button
14 Strap holder 20 Infrared (IR) port
WPA 1200 II Quick Start Guide
3
Installing the Battery
1. Open the battery compartment by pushing the latch in the direction of the
arrow and lifting up.
The battery compartment is displayed:
2. Position the battery pack, making sure the
battery contacts are aligned with the contacts in
the compartment and the battery is placed on
top of the plastic tab, as shown in the following
illustration.
3. Slide the battery pack into the battery bay while
simultaneously pulling the plastic tab and
securing clip until the battery clicks into place.
4. Replace the battery compartment cover.
Com
p
artment contacts
Plastic batter
y
tab
Batter
y
securin
g
cli
p
Plastic tab
Securing clip
WPA 1200 II Quick Start Guide
4
Keypads and Function Buttons
When the Function button is pressed, an
icon appears in the operating system.
Function activated icon
1 Turns the PA600II ON and OFF. 11 Function keys
2Number 1, Left soft key 12 Tab, Windows key opens
3Alphanumeric 2, a, b, c, Up key 13
A
lphanumeric 7, p, q, r, s,
brightness -
4
Alphanumeric 3, d, e, f, Right
soft key 14
A
lphanumeric 8, t, u, v, Down
key
5 Enter key, OK 15
A
lphanumeric 9, w, x, y, z,
brightness +
6 Back space, Escape key 16 Alpha
7 Alphanumeric 4, g, h, i, Left key 17 Asterisk, Illuminates keypad
8 Alphanumeric 5, j, k, l 18 Number 0, space
9
Alphanumeric 6, m, n, o, Right
key 19 Period, Pound
10 Up button 20 Down Button
Table of contents
Other Wasp Barcode Reader manuals
Wasp
Wasp WLR8900 Operating instructions
Wasp
Wasp WWS450 User manual
Wasp
Wasp N1181 Operating instructions
Wasp
Wasp WLS8600 User manual
Wasp
Wasp 2D User manual
Wasp
Wasp WWS800 Manual
Wasp
Wasp WWS110i User manual
Wasp
Wasp WWS800 User manual
Wasp
Wasp WWS500 Operating instructions
Wasp
Wasp WWS650 Installation and operation manual
