WAGNER GM 5000EA User manual

GM 5000EA

II 2 G EEx 0.24 mJ

0102

cus

B_03229

Electrostatic Airspray gun

for manual operation

with ﬂat or round jet nozzles

Edition 03/2012

Translation of the original

Operating manual

(in submission)

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

Contents

1 ABOUT THESE INSTRUCTIONS 6

1.1 Languages 6

1.2 Warnings, notes and symbols in these instructions 6

2 GENERAL SAFETY INSTRUCTIONS 7

2.1 Safety instructions for the operator 7

2.1.1 Electrical equipment 7

2.1.2 Personnel qualiﬁcations 7

2.1.3 A safe work environment 7

2.2 Safety instructions for staff 7

2.2.1 Safe handling of WAGNER spray units 8

2.2.2 Earth the unit 8

2.2.3 Material hoses 8

2.2.4 Cleaning 9

2.2.5 Handling hazardous liquids, varnishes and paints 9

2.2.6 Touching hot surfaces 10

2.3 Correct use 10

2.4 Safety-relevant information about discharges 11

2.5 Use in an explosion hazard area 11

2.5.1 Correct use 11

2.5.2 Explosion protection identiﬁcation CE 11

2.5.2.1 Identiﬁcation„X“ 11

2.5.3 Explosion protection identiﬁcation FM 12

2.6 German regulations and guidelines 12

3 GUARANTEE AND CONFORMITY DECLARATIONS 13

3.1 Important notes on product liability 13

3.2 Guarantee claim 13

3.3 CE-Conformity 14

4 DESCRIPTION 15

4.1 Fields of application,using in accordance with the instructions 15

4.1.1 Processable materials 15

4.2 Scope of delivery 16

4.3 Technical data 17

4.4 Functional description 18

4.4.1 Design of spray gun (standard variant) 18

4.4.2 Functions of the spray gun 19

4.5 Spraying process 20

4.5.1 Air atomizing spray process - round jet 20

4.5.2 Air atomizing spray process - ﬂat jet 20

4.5.3 The electrostatic effect 21

5 START-UP AND OPERATION 22

5.1 Installation and connection 22

5.1.1 Typical electrostatic air spraying system 22

5.1.2 Ventilation of the spray booth 23

5.1.3 Air supplies 24

5.1.4 Paint supplies 24

5.1.5 Earthing 25

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

Contents

5.2 Preparation of paints 27

5.2.1 Viscosity conversion table 27

5.3 Wagner electrostatic air spraying system 28

5.3.1 Pressure settings for round jet nozzles 28

5.3.2 Pressure settings for ﬂat jet nozzles 29

5.3.3 Electrostatic and atomization 30

5.3.4 Output measured 30

5.4 Start-up 31

5.4.1 General rules for making adjustments to the spray gun 31

5.4.2 Preparation for starting up 31

5.5 Working 33

5.5.1 Filling with working material 33

5.5.2 Start-up for spraying 34

5.5.3 Changing from Air-round jet to Air-ﬂat jet 35

5.5.4 Cleaning of the nozzle parts 35

6 MAINTENANCE 36

6.1 Periodically checks 36

6.2 Cleaning and decommissioning 36

6.3 Dismantling of the spray gun 38

6.4 Cleaning the parts after disassembly 41

6.5 Assembling the spray gun 42

6.6 Function test after assembly of the gun 46

6.6.1 Checking the high-voltage 46

6.6.2 Air tests 47

6.6.3 Material pressure test 47

6.6.4 Check spray pattern 48

7 TROUBLE SHOOTING AND SOLUTION 49

8 PRODUCT DISPOSAL 50

9 ACCESSORIES 50

9.1 Valve seats, Air/ Valve tips, Air 50

9.1.1 Valve seats 50

9.1.2 Valve tips 50

9.2 Round jet nozzles 51

9.2.1 AR 5000 air caps 51

9.2.2 AR 5000 nozzles 51

9.3 Flat jet nozzles 51

9.3.1 AF 5000 air caps 51

9.3.2 AF 5000 nozzles 52

9.4 Hoses and electrical cables 53

9.4.1 Standard hose sets and components 53

9.4.2 Hose sets for low impedance materials 54

9.4.3 Gun cable and gun cable extensions 55

9.5 Reduction ﬁttings for high-pressure hoses 55

9.6 Miscellaneous 56

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

Contents

10 SPARE PARTS 59

10.1 How to order spare parts? 59

10.2 GM 5000EA spare parts list 60

10.2.1 GM 5000EA spare parts list- End piece 62

10.2.2 GM 5000EA spare parts list - Handle 64

10.3 Accessories spare parts lists 66

10.3.1 AR 5000 (D8) nozzle spare parts list 66

10.3.2 AR 5000 (D12) nozzle spare parts list 66

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

1.2 WARNINGS, NOTES AND SYMBOLS IN THESE INSTRUCTIONS

1 ABOUT THESE INSTRUCTIONS

1.1 LANGUAGES

4HISOPERATINGMANUALCONTAINSINFORMATIONABOUTTHEOPERATIONREPAIRANDMAINTENANCE

OFTHEUNIT

 !LWAYSFOLLOWTHESEINSTRUCTIONSWHENOPERATINGTHEUNIT

4HISEQUIPMENTCANBEDANGEROUSIFITISNOTOPERATEDINACCORDANCEWITHTHISMANUAL

%LECTROSTATICSPRAYGUNSMAYBEOPERATEDONLYBYTRAINEDPERSONNEL

#OMPLIANCEWITHTHESEINSTRUCTIONSCONSTITUTESANINTEGRALCOMPONENTOFTHEGUARANTEE

AGREEMENT

4HISOPERATINGMANUALISAVAILABLEINTHEFOLLOWINGLANGUAGES

,ANGUAGE 0ART.O ,ANGUAGE 0ART.O

'ERMAN  %NGLISH

&RENCH  $UTCH

)TALIAN  3PANISH

2310480 2319149

2320149 -

2320150 2320151

Warning instructions in this manual point out particular dangers to users and equipment

and state measures for avoiding the hazard.

These warning instructions fall into the following categories:

Danger - imminent danger. Non-observance will result

in death, serious injury and serious material damage.

Warning - possible danger. Non-observance can result

in death, serious injury and serious material damage.

Caution - a possibly hazardous situation.

Non-observance can result in minor injury.

Note - provide information on particular characteristics and how to proceed.

Caution - a possibly hazardous situation.

Non-observance can cause material damage.

SIHI_0100_GB

DANGER

This line warns of the hazard!

Possible consequences of failing to observe the warning instructions.

The signal word points out the hazard level.

The measures for preventing the hazard and its consequences.

SIHI_0103_GB

WARNING

This line warns of the hazard!

Possible consequences of failing to observe the warning instructions.

The signal word points out the hazard level.

The measures for preventing the hazard and its consequences.

SIHI_0101_GB

CAUTION

This line warns of the hazard!

Possible consequences of failing to observe the warning instructions.

The signal word points out the hazard level.

The measures for preventing the hazard and its consequences.

SIHI_0102_GB CAUTION

This line warns of the hazard!

Possible consequences of failing to observe the warning instructions. The signal word

points out the hazard level.

The measures for preventing the hazard and its consequences.

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

2 GENERAL SAFETY INSTRUCTIONS

2.1 SAFETY INSTRUCTIONS FOR THE OPERATOR

2.1.1 ELECTRICAL EQUIPMENT

2.1.2 PERSONNEL QUALIFICATIONS

2.1.3 A SAFE WORK ENVIRONMENT

2.2 SAFETY INSTRUCTIONS FOR STAFF

Keep these operating instructions to hand near the unit at all times.

Always follow local regulations concerning occupational safety and accident prevention.

Electrical plant and unit

To be provided in accordance with the local safety requirements with regard to the

operating mode and ambient inﬂuences.

May only be maintained by skilled electricians or under their supervision.

Must be operated in accordance with the safety regulations and electrotechnical

regulations.

Must be repaired immediately in the event of problems.

Must be put out of operation if they pose a hazard.

Must be de-energized before work is commenced on active parts. Inform staff about

planned work, observe electrical safety regulations.

 %NSURETHATTHEUNITISOPERATEDANDREPAIREDONLYBYTRAINEDPERSONS

Make sure that the ﬂoor in the area where you are working is anti-static in accordance

with EN 61340-4-1 (the resistance value may not exceed 100 MOhm).

Ensure that all persons within the working area wear antistatic shoes. Footwear must

comply with EN 20344.The measured insulation resistance may not exceed 100 MOhm.

Ensure that during spraying, persons wear anti-static gloves so that they are earthed

via the handle of the spray gun.

If protective clothing is worn, including gloves, it has to comply with EN 1149-5. The

measured insulation resistance may not exceed 100 MOhm.

Paint mist extraction systems must be ﬁtted on site according to the local regulations.

Ensure that the following components of a safe working environment are available:

– Material/air hoses adapted to the working pressure.

– Personal safety equipment (breathing and skin protection).

Ensure that there are no ignition sources such as naked ﬂame, glowing wires or hot

surfaces in the vicinity. Do not smoke.

Always follow the information in these instructions, particularly the general safety

instructions and the warning instructions.

Always follow local regulations concerning occupational safety and accident

prevention.

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

2.2.1 SAFE HANDLING OF WAGNER SPRAY UNITS

2.2.2 EARTH THE UNIT

2.2.3 MATERIAL HOSES

The spray jet is under pressure and can cause dangerous injuries.

Avoid injection of paint or cleaning agents:

 Never point the spray gun at people.

 Never reach into the spray jet.

 Before all work on the unit, in the event of work interruptions and functional faults:

– Switch off the energy/compressed air supply.

– Secure the spray gun against actuation.

– Relieve the pressure from the spray gun and unit.

– By functional faults: Identify and correct the problem, proceed as described in

chapter „Trouble shooting“.

In the event of skin injuries caused by paint or cleaning agents:

Note down the paint or cleaning agent that you have been using.

Consult a doctor immediately.

Avoid danger of injury through recoil forces:

Ensure that you have a ﬁrm footing when operating the spray gun.

Only hold the spray gun brieﬂy in any one position.

Depending on the high-voltage of the spray electrode and the ﬂow rate at spray pressures

can produce an electrostatic charge in the equipment.These can cause sparks and ﬂames

upon discharge.

Ensure that the unit is always earthed.

Earth the work pieces to be coated.

Ensure that all persons inside the working area are earthed, e.g. that they are wearing

derivable shoes.

When spraying, wear derivable gloves to earth yourself via the spray gun handle.

 Ensure that the hose material is chemically resistant to the sprayed materials.

 Ensure that the material hose is suitable for the pressure generated in the unit.

 Ensure that the following information is visible on the high pressure hose:

– Manufacturer

– Permissible operating overpressure

– Date of manufacture.

 The electrical resistance of the complete high pressure hose must be less than 1 MOhm.

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

2.2.4 CLEANING

2.2.5 HANDLING HAZARDOUS LIQUIDS,VARNISHES AND PAINTS

When preparing or working with paint and when cleaning the unit, follow the working

instructions of the manufacturer of the paints, solvents and cleaning agents being

used.

Take the speciﬁed protective measures, in particular wear safety goggles, protective

clothing and gloves, as well as hand protection cream if necessary.

Use a mask or breathing apparatus if necessary.

For sufﬁcient health and environmental safety: Operate the unit in a spray booth or on

a spraying wall with the ventilation (extraction) switched on.

Wear suitable protective clothing when working with hot materials.

De-energize the unit electrically.

Disconnect the pneumatic supply line.

Relieve the pressure from the unit.

Ensure that the ﬂash point of the cleaning agent is at least 15K above the ambient tem-

perature. Otherwise, the cleaning works shall be carried out at forced ventilated clea-

ning place.

To clean, use only solvent-soaked cloths and brushes. The cleaning process mustn´t

damage parts of the spray gun, it mustn´t be an abrasive procedure.

Parts of spray gun mustn´t submerged or soaked into solvent.

Non-ignitable cleaning liquids shall be preferred.

A suitable solvent for cleaning the spray gun depends on the part of the gun and on the

material that needs to be removed. It´s recommended to use only non-polar solvents

to prevent a conductive residue on critical components. If it´s necessary to use polar

solvents to clean the spray gun components, all residue must be removed by using a

nonconductive non-polar solvent.

All electrical components cannot be cleaned or soaked in any solvents.

An explosive gas/air mixture forms in closed containers.

When cleaning units with solvents, never spray into a closed container.

For cleaning liquids only electrically leading containers may be used.

The containers must be earthed.

GM 5000EA

OPERATING MANUAL

EDITION 03/2012 ORDER NUMBER DOC 2319149

2.3 CORRECT USE

7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE

 5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2

 /PERATETHEUNITONLYASANENTIREUNIT

 $ONOTDEACTIVATESAFETYEQUIPMENT

 5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES

2.2.6 TOUCHING HOT SURFACES

➞ Touch hot surfaces only if you are wearing protective gloves.

➞ When operating the unit with a coating material with a temperature of > 43 °C; 109.4 °F:

- Identify the unit with a warning label that says„Warning - hot surface“.

Order No.

9998910 Information label

9998911 Safety label

Other manuals for GM 5000EA

Table of contents

Other WAGNER Paint Sprayer manuals

WAGNER

WAGNER WALL EXTRA I-SPRAY 1300 User manual

WAGNER

WAGNER Power Painter User manual

WAGNER

WAGNER EZ TILT POWER PAINTER PRO User manual

WAGNER

WAGNER FLEXiO 990 User manual

WAGNER

WAGNER W 140 P User manual

WAGNER

WAGNER WallPerfect W 995 User manual

WAGNER

WAGNER HOME STUDIO SPRAYER User manual

WAGNER

WAGNER WoodPerfect W 600 User manual

WAGNER

WAGNER 0418B User manual

WAGNER

WAGNER Paint Crew 770 User manual

WAGNER

WAGNER Control Pro 130 User manual

WAGNER

WAGNER GM 5000EA Operational manual

WAGNER

WAGNER W 985 E User manual

WAGNER

WAGNER Finish 270 User manual

WAGNER

WAGNER Super Finish 27 User manual

WAGNER

WAGNER CONTROL 150 M User manual

WAGNER

WAGNER Paint Crew User manual

WAGNER

WAGNER Smart Roller User manual

WAGNER

WAGNER PLASTCOAT 1030 User manual

WAGNER

WAGNER HERO 23D User manual

WAGNER

WAGNER FLEXiO 990 User manual

WAGNER

WAGNER ProSpray 27 User manual

WAGNER

WAGNER COLORKATALOG GB-2005 User manual

WAGNER

WAGNER FinishControl 5500 User manual

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Graco

Graco 246737 Repair and parts

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

Graco

Graco EM 390 Instructions-parts list

DeVilbiss

DeVilbiss LUNA2i Operation manual