Wacom DTU-1031X User manual

Important Product Information

Contents

Contents 1

Precautions

Product Specifications

Disposal and Recycling Information

Regulatory Statement

License and Warranties

DTU-1031X

Contents

Contents 2

DTU-1031(X)

Important Product Information

Version 1.0 H0814

use.

Wacom reserves the right to revise this publication without obligation to provide notification of

such changes.

Wacom does its best to provide current and accurate information in this manual. However,

Wacom reserves the right to change any specifications and product configurations at its

discretion, without prior notice and without obligation to include such changes in this manual.

The above year indicates when this manual was prepared. However, the date of release to the

users of the "manual" is simultaneous with the introduction into the market of the applicable

Wacom product.

Wacom is a registered trademark of Wacom Co., Ltd.

Contents

Contents 3

CONTENTS

Precautions 4

Precautions on use and handling 4

Physical location 4

Environment 4

Usage 5

Handling 6

Product Specifications 10

General Specifications 10

Display 11

Pen Tablet 12

Pen 12

Disposal and Recycling Information 13

Turkey RoHS 13

Waste Electrical and Electronic

Equipment (WEEE) Directive 13

United States E-waste Program 13

Regulatory Statement 14

FCC notice 14

EU Conformity Information 15

License and Warranties 16

Tablet driver software end user license

agreement

(Worldwide except for Europe, Africa and

Middle East) 16

Tablet driver software end user license

agreement

(Europe, Middle East and Africa) 21

Limited warranty

(U.S.A. and Canada) 26

Limited warranty

(Central America, South America and the

Caribbean) 28

Limited warranty

(Europe, Africa and Middle East) 30

Contents

Contents 4

PRECAUTIONS

PRECAUTIONS ON USE AND HANDLING

To ensure the safe operation of the product, be sure to follow all instructions, cautions, and

warnings found within this manual. Failure to do so could cause damage to the product,

damage to your computer, or loss of data. Failure to do so could also void your warranty, in

which case Wacom shall have no responsibility to repair or replace the product.

PHYSICAL LOCATION

WARNING

The product should be used in normal office environments. It may be used also as a center

console in climate controlled environments. The product was tested by Wacom for usage in

a normal office environment only, and there was no testing for compatibility in medical and

military application areas.

The interactive pen display is neither waterproofed nor explosion resistant.

It serves and can be used solely as a passive display and input device.

In all applications that are not designated for its sole usage, no testing has been done on

the functionality and possible malfunctions of the interactive pen display. The adoption of

the interactive pen display in application areas other than normal office environments is at

the user’s risk.

ENVIRONMENT

CAUTION

Do not use or store the product where:

• Temperature changes are severe or exceed specifications (e.g. outdoors or inside a

vehicle).

• The pen display or the pen are exposed to direct sunlight or heat from an appliance, or

are exposed to water or any other kind of liquid.

Do not use the product in a dusty environment; this may damage it.

Contents

Contents 5

USAGE

WARNING

Only use a USB cable specified for use with the product. If a different type of USB cable is

used, the product will not work properly or may be damaged. Using a different type of USB

cable also has the potential to result in fire. Use of a different USB cable will void your

warranty.

Do not damage, forcibly bend, or bundle the USB cable. Do not place heavy objects on the

cord or expose it to excessive heat. Ignoring this warning may result in fire, electrical

shock, or product failure.

Do not connect or disconnect the USB cable with wet hands. Ignoring this warning may

result in electrical shock or product malfunction.

Do not insert a metal object or any foreign material into the USB port, video connector

ports, or any other opening on the product. Doing so may cause product malfunction, fire,

or electrical shock.

CAUTION

Provide adequate ventilation to the product. Poor ventilation may cause it to overheat or

malfunction, and shorten the life of the product.

To protect the health of your eyes when using the product:

• Use the product only in a well-lit room, and do not sit too close to the display screen.

• Take regular breaks when using the product for extended periods of time.

Contents

Contents 6

Take care of the LCD display. Do not push down forcibly with the pen on the LCD display.

Pushing down forcibly on the display may cause ripple-like striped patterns to temporarily

appear on the display. The ripples disappear when you stop pushing down with the pen.

The following conditions are characteristics of LCD displays and do not indicate damage or

malfunction to the product.

• Depending on the displayed contents, uneven brightness may be produced.

• Depending on the displayed contents, a small portion of lit and unlit lines, or red or blue

dots may be visible.

• When displaying objects with delicate patterns, flicker or striped patterns may be

produced.

• After displaying the same still image for an extended period of time, a residual image

may be produced. (Residual images will gradually disappear over time.)

• Changes to the condition of the back light over the period of using the display will

gradually affect the condition of the display.

• Depending on the angle from which the display is viewed, the colors and hues may

appear changed.

HANDLING

WARNING

High Voltage. Do not open or disassemble the product. There is a risk of electrical shock

when the casing is open. Opening the case will void your warranty and Wacom shall have

no responsibility to repair or replace the product.

Ensure that cabling or other objects do not get entangled in the moving parts of the stand.

Do not place the product on any wet surface or table. The rubber pads of the stand may

slip, allowing the product to fall.

When moving the product, ensure all cables are fully disconnected from the computer

and other areas. Appropriately bundle the cables to ensure they do not hang free and

create a hazard. Tripping over loose cables can cause physical damage or personal

injury.

Do not place the product on any unsteady surface or table. Do not place it on slanted

areas, unstable areas, or areas where vibration is present.

Physical damage or personal injury may result if the product falls from an unsuitable

surface.

Contents

Contents 7

Do not sit on, or hang from, the table or other surface where the product is placed. The

product may fall and cause physical damage or personal injury. Take extra care where

children are present.

If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking from it;

this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse immediately with

running water for at least 15 minutes. If contact is made with the eyes or mouth, consult a

physician.

Choking hazard. Prevent children from swallowing the pen tip. The pen tip may

accidentally be pulled out if children are biting on them. Prevent children from playing with

any packing materials or wrapping, as a choking or suffocation hazard may exist.

Refrain from using the product during thunder or electrical storms. Also disconnect the

product from the USB port of a computer during such weather. Using the product during

thunder or electrical storms may cause product malfunction, fire, or electrical shock.

Contents

Contents 8

CAUTION

Do not disassemble the pen. This may cause the device to malfunction. In this case,

Wacom shall have no responsibility to repair or replace the pen.

Do not strike hard objects with the pen, such as repeatedly tapping the pen against a desk

surface. Doing so may cause damage to the pen.

Do not apply excessive pressure or stress to the pen tip. This may cause failure or

malfunction.

Take care not to drop or damage your pen. Use the pen tether provided to secure your pen.

Only use a replacement pen tip (nib) specified for the pen by Wacom.

Do not scratch the display screen. Avoid placing sharp objects on the display screen surface.

Avoid shock or vibration to the product and the pen. Hitting or dropping the product may

damage the display screen or other components.

Do not put heavy objects on the product or push against it with a strong force; this may

damage the display screen or break the display stand mechanism.

Do not place heavy articles on the cabling of the product, repeatedly bend the cables

sharply, or apply heavy stress to the cable connectors; this may damage the product or

cabling.

Do not store the product on a surface that would excessively bend or crimp the cable.

If your product has a coated surface, a worn pen nib that is sharp or angular may cause

damage. Replace the pen tip if necessary.

Do not use any organic solvent (e.g. alcohol) or even mild detergent to clean the display

screen. Use of these cleaners can damage the display screen. Damage of this kind is not

covered by the manufacturer's warranty.

• Before cleaning, always disconnect the product from the USB port.

• To clean the display screen, use an anti-static cloth or a slightly damp cloth. When

cleaning, apply only a light amount of pressure to the display screen and do not make

the surface wet.

• To clean the pen display casing or the pen, use a soft cloth slightly dampened with

water.

Touching the same part of your body to the product (LCD panels and other areas) for

extended periods of time may cause low temperature burns. Avoid touching the product

with the same part of your body for extended periods of time.

Contents

Contents 9

Do not place metallic objects on the product when using the product. Doing so may cause

malfunction or damage to the product.

Placing other tablets or other devices near the product may affect the operation of the

product and cause malfunctions. If this happens, place the interfering devices to the side or

further away from the product.

To avoid permanently discoloring or altering the surface of your work area, periodically

move the product to another part of the surface.

Handle the display carefully. When lifting or moving the display, hold the product's main

body casing. Do not hold the display by the stand.

Place the pen in the compartment so the pen tip faces to the left. Be careful not to place the

pen in the wrong direction or else the pen could become damaged.

Contents

Contents 10

PRODUCT SPECIFICATIONS

GENERAL SPECIFICATIONS

Dimensions (W x H x D) 310 x 217 x 14 mm

Weight Main Body: 1.1 kg

Power consumption 5 W max.

1 W or less in sleep mode

Stand Integrated stand, 18 degrees from flat

Interface cables Special USB cable (Y-cable)

Cover plate Tempered Glass with safety film (Back side)

Operating temperature & humidity 5°C to 40°C, humidity: 30% to 80%

(non-condensing)

Storage temperature & humidity -20°C to 60°C, humidity: 30% to 90%

(non-condensing)

(Maximum storage humidity is 90% at a

temperature of 35°C, and maximum storage

temperature is 60°C at a humidity of 30%.)

Other manuals for DTU-1031X

Table of contents

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

DT Research

DT Research DT365CT Basic operation guide