Wacom DTF-521 series User manual
1
So that the DTF-521 may be Used Safely...
■Regarding the power plug and power
adapter.
-Please remove dust from the power
plug regularly. The addition of moisture,
etc. to accumulated dust may lead to
fire.
-Please do not use any power adapters
other than those included with the
product. Ignoring this warning may
result in fire or product failure.
-Please do not damage or forcibly
bend or bundle the power adapter
cord. Also, please do not place heavy
objects on it or expose it to excessive
heat. Ignoring this warning may result
in fire, electric shock or product failure.
-In the unlikely case that the power
adapter should produce smoke or a
strange odor, please disconnect it from
the wall outlet and return it to either the
store where you purchased it or to the
Wacom Customer Support Center for
repair service.
-Please do not connect or disconnect
the power adapter with wet hands.
Ignoring this warning may result in
electric shock or malfunction.
-Please do not open or otherwise
change the power adapter. Ignoring
this warning may result in fire or
electric shock.
In order to prevent this, when in such
locations, always disconnect the productʼ
s USB connector from your computer
and turn off the switch.
■Do not open the back cover.
Inside this product there are several
high-voltage parts. Persons other than
professional service personnel should
never open the back cover of this
product. Unauthorized opening of the
back cover may lead to fire or electric
shock.
■When this product ceases to operate
normally due to being dropped or a
similar cause, remove the power source
cable from the electrical outlet.
Leaving the power cable connected may
result in fire or electric shock.
This product may cause other electronic
devices to malfunction, or other devices
may cause this product to malfunction.
■Turn this product off in places where
the use of electronic equipment is
prohibited.
In airports, hospital intensive care units
and other such places where the use
of electronic equipment is prohibited,
this product may adversely affect the
operation of other electrical devices.
The following symbols appear throughout this user guide in order to ensure safe use of the
DTF-521 (hereafter referred to as “DTF-521,” “the product” or “this product”). Please read these
items carefully and always heed the Warning and Caution items when using your DTF-521.
This symbol indicates an item that, if ignored when handling the product,
could lead to the loss of life or serious injury.
Warning
This symbol indicates an item that, if ignored when handling the product,
could lead to injury or damage to personal property.
Caution
Meanings of Symbols:
Indicates that it is important to be careful when taking the action or actions noted.
Indicates that the action or actions noted are to be avoided.
Indicates it is important to take the action or actions noted.
Warning
■Do not use the product in a facility
c o n t r o l s y s t e m t h a t r e q u i r e s a n
extremely high level of reliability.
User's Guide
2
of time, disconnect the power adapter
from the electrical outlet.
■Do not use this product in a dusty
environment.
Dust can cause damage to the product.
■Do not block the ventilation holes on
the backside of the product.
Blocking these holes may cause internal
overheating and subsequent damage.
■Do not pick up the product by its stand.
If excessive force is used in handling the
stand, its open and close function may
become damaged. When picking up the
product, always pick it up by the body.
■When connecting the power plug
When plugging the power adapter into an
electrical outlet, also connect a grounded
wire.
■When not using this product for a long
period of time
For safety reasons, when you will not be
using the product for a considerable length
■Do not use organic solvents to clean
this product.
When cleaning the product, never use
such organic solvents as alcohol. Such
solvents may cause discoloration and
deterioration in quality.
■When cleaning this product, always
disconnect the USB connector.
When cleaning the product, always
disconnect the USB connector from the
USB port of the computer. Failure to do so
may result in electric shock.
■While this product is in use, avoid
placing any metal objects on it.
Do not place any metal objects on the
product while you are using it. This may
result in malfunction or product failure.
■Do not touch any liquids that may be
leaking from this product.
The liquid contained in the product is an
irritant. In the unlikely case that such liquid
should leak, never touch it with bare hands.
In case of contact with skin, mouth or eyes,
rinse immediately with running water and
continue rinsing for 15 minutes or longer.
Also consult a physician.
■Do not use excessive force with the cable.
Please do not step on, or place heavy
objects on any of the productʼs cables.
Also, do not apply excessive force to the
base of the cable or repeatedly bend and
stretch it, as this may cause it to break or
malfunction.
■Do not place the product in either very
hot or very cold places.
Do not place the product in very hot (35
degrees centigrade or more) or very cold
(5 degrees centigrade or less) locations.
Also, avoid placing it in locations with
severe temperature fluctuations as this
may adversely affect the product and
cause product failure.
■Do not disassemble the
product.
Do not disassemble or modify the
product, as these actions may
lead to fire, excessive generation
of heat, electrical shock or injury.
The guarantee on the product
will become null and void if the
product is ever disassembled.
Caution
So that the DTF-521 may be Used Safely
■Do not let the product get wet.
Please do not place containers
such as cups and vases containing
water near the product. Coming in
contact with water or other liquids
may cause product failure.
■Regarding the Grip Pen
-Do not strike hard objects with the
metal Grip Pen. Doing so may cause
damage to the product.
-Be careful to not allow small children
to put either the pen or the spare nib
into their mouths. There is the danger
that the nib or side switch may be
accidentally swallowed or that the grip
pen may be damaged.
■Do not place the product on
unstable surfaces.
Do not place the product where it is
likely to totter, lean or be exposed
to strong vibrations. Doing so may
lead to the product falling, resulting in
injury and/or product failure.
■Do not place heavy objects
on the product.
Do not put excessive weight, or place
heavy objects on the product. These
actions may cause product failure.
3
Caution
■Do not connect or disconnect any cable while the product or your
computer is on.
Do not connect or disconnect any cable (including the USB cable) or the power
adapter while your computer or this product is turned on. This may cause damage
to the product or to your computer.
4
1 Wacom Company, Ltd. holds the copyright to
the auxiliary tablet.
2 The unauthorized duplication or reproduction
in whole or in part of the tablet driver or this
user guide is expressly prohibited.
3 Wacom reserves the right to change the
configurations or specifications of the tablet
driver or the product, as well as the contents
of this user guide, without prior notice.
As a participant in the Energy Star program,
Wacom has determined that this product
meets the standards of the Energy Star
program.
Please take the following precautions
to protect the health of your eyes.
●When using the product, make sure that the
room is sufficiently illuminated and be careful
not to get your face too close to the screen.
●Take regular breaks when using the product
over an extended period of time.
Warranty Exclusions
Regarding warranty of the product
Wacom warrants the product, to the original
consumerpurchaser,exceptsoftware,
tobefreefromdefectsinmaterialsand
workmanship undernormal use andservice
aslongastheproductremainsinproduction,
butnotlessthan one(1)year,from thedate
of original retail purchase, as evidenced by a
copyofthereceiptoraregistrationcardthat
has been returned to Wacom within 30 days
ofpurchase.
Regarding Trademarks
●Wacom are registered trademarks of WACOM
Company, Limited.
●Windows is a trademark of Microsoft
Corporation, registered in the United States
and other countries.
●Macintosh is a trademark of Apple Computer,
Inc., registered in the United States.
●Other product names and related items are
the trademarks or registered trademarks of
each concerned company.
Precautions
Depending on what is being displayed, bright or
dark green, red and blue dots may show up on
a very small portion of the LCD display screen.
These do not indicate product failure or a lack
of quality.
So that the DTF-521 may be Used Safely
●Wacom will not bear any responsibility for
damage caused by fire, earthquake, accidents
caused by third persons, intentional or
accidental abuse by the customer or any
other damage caused by abnormal use of the
product.
●Wacom will not bear any responsibility for
contingent damages (such as loss of business
profits, suspension of operations, alterations
to and disappearance of data, etc.) caused by
use of, or inability to use, this product.
●Wacom will not bear any responsibility for
damage resulting from the use of this product
in a fashion other than as explained in this
user guide.
●Wacom will not bear any responsibility for
damage resulting from malfunctions caused
by using this product in conjunction with
adaptation equipment or other company’s
software.
Regarding this User Guide
This user guide contains instructions regarding
the set up, installation, functions and methods
of use of this product. The product consists of
the LCD monitor and the tablet, which will act
as two distinct pieces of equipment to be used
in conjunction with your computer. First, you
will set up the display device and then you will
install the tablet driver in your computer. You
will then be able to use this product as a built-
in display tablet.
Analog RGB compatible video output is
necessary for the screen display of this
product. For information regarding how to use
video cards, refer to the instruction manual
accompanying the video card.
Please be aware of the following
regarding the LCD display.
5
Table of Contents
So that the DTF-521 may be Used Safely... ..............1
Table of Contents ....................................................5
Component Functions ..............................................6
Opening the Stand .......................................................................... 7
Using the Penholder ........................................................................ 7
Installing DTF-521 on a Mount Arm ................................................... 8
Accessory Check .....................................................9
Connecting DTF-521 ...............................................10
Installing DTF-521 Driver .........................................12
Windows Setup .............................................................................. 12
Macintosh Setup ............................................................................. 13
Uninstalling the Tablet Driver ............................................................ 13
Switching Display Images ................................................................ 14
The Auto-Adjust Function .................................................................. 14
The DTF-521 Power Saving Function ................................................. 14
The DTF-521 Display ...............................................14
Protrusion of the Picture from the LCD Panel and the Blurring of Characters... ..... 15
Button Functions .............................................................................. 16
Adjusting the Brightness and Contrast of the Display ........................... 16
Pen .........................................................................19
Basic Operations of the Pen ............................................................. 20
How to use the Tablet Button ............................................................ 21
Using the Control Panel ...........................................22
Displaying the Control Panel ............................................................ 22
Control Panel Basics ........................................................................ 22
Synchronizing the Positions of the Pen Tip and Pointer ......................... 23
Setup Procedures for when Multiple Interactive Pen
Tablets are Connected .............................................24
Supplementary Information .................................25
Removing Stains ............................................................................. 25
Replacing the Pen Nib ..................................................................... 25
Troubleshooting ......................................................26
Display Troubleshooting ................................................................... 26
The Pen and Side Switch do not Operate Correctly (For Both Windows and
Macintosh) ..................................................................................... 28
General Troubleshooting .................................................................. 28
Troubleshooting for Windows ........................................................... 29
Troubleshooting for Macintosh .......................................................... 29
Obtaining Technical Support .................................31
6
Component Functions
Integrated LCD
Monitor and Tablet
+ Button
- Button
ENTER Button
Menu Button
Stand Adjustment Lever
▶P.7
▶
P.16
Connector
▶P.11
Stand
▶
P.7
Top
Power Switch
Pen Rest
Place the pen here while the pen is not in use.
Power LED
Lights blue when power has been supplied the
DTF-521 and the computer and video signals is
present. Glows orange when no video signal is
detected by the DTF-521.
Status LED
When the pen switch is on, this will become blue.
Front
Back
For Application Software buttons
Enable y o u t o c re a t e d i ffe rent funct i o n s f o r
supporting application software
Tablet Button
You can operate a zoom function and a scroll
function with a single touch of a button.
7
Opening the Stand
1Pull up on the stand adjustment lever.
2Let the stand down.
Using the Penholder
Pull the penholder towards you as shown in the illustration below.
1
2
Caution
Always close the stand and, as shown in the above illustration, lay the tablet on its side
before pulling the penholder out.
8
Installing DTF-521 on a Mount Arm
Caution
When installing the unit on a mount arm or
other stand, always follow the directions in
the instruction booklet for the mount arm or
stand, as well as the instructions contained
in this document. Incorrect installation may
result in the product coming loose and falling
and possibly causing product failure.
5Connect the cables and save the screws that you
removed in step 3.
3Remove the four screws that hold the stand to
the unit.
4Using four M4/0.7mm screws, securely mount
the arm or similar apparatus to the back of the
unit.
2Place the display unit face down on a flat surface.
To prevent harm to the front of the unit, first
spread a cloth or other similar material on the flat
surface.
Unscrew
Component Functions
This product conforms to the Video Electronics Standard Association’s (VESA) Flat Panel Monitor
Physical Mounting Interface Standard (FPMPMI).
This product can be removed from the stand and mounted on such apparatuses as a VESA-standard
mount arm. In order to do this, M4/0.7 mm screws, which are not included with the product, are
needed. Use screws that will, at the time of installation, penetrate the surface of the product by no
more than 15 mm. Use of longer screws may result in damage to internal parts of the product.
1Make sure that both your computer and the product are turned off and that all cables are disconnected.
9
●USB Cable
●Power Adapter
●Power Cable
●Pen
●User Guide (This booklet)
●Serial Cable
User Guide
●Tablet Driver CD - ROM /
Application CD - ROM
Accessory Check
Important
Do no throw the box away; it is useful for the storage and transport of the
product.
●Application Install Guide
Application
Install
Guide
10
1Turn off both your computer and the product.
2Connect the Analog-RGB connector to your computer’s display port.
3Connect the power adapter to the power cable and connect the DC power connector to the DC power
input terminal. Next, plug the power cable into your electrical outlet.
Be sure to also connect a ground wire.
4Turn on the product’s power switch.
The power indicator lamp will light up orange.
5Turn on your computer.
6While looking at the LCD screen, configure the color resolution and size settings.
7Turn off your computer and the product.
8Connect a USB connector of the product to a USB port of your computer using a USB cable.
9Turn on your computer and the product.
10Install the DTF-521 driver (Please refer to “Installing DTF-521 Driver” on page 12).
- Do not modify the refresh rate. Setting the rate to a value that exceeds the
DTF-521 refresh rate may result in loss of picture.
- The color palette settings and corresponding number of colors displayed are as
follows:
High Color (16 bit) →65,536 colors / True Color (24 bit) → Roughly 1,619 colors
*The number of colors is limited by the efficiency of your computer and video card.
For details, refer to the user’s manual provided by the manufacturers.
Important
Connecting DTF-521
Other manuals for DTF-521 series
3
Table of contents
Other Wacom Monitor manuals
Wacom
Wacom DTI-520UB User manual
Wacom
Wacom Cintiq 22HD User manual
Wacom
Wacom DTU-1031X User manual
Wacom
Wacom DTF-510 Installation instructions
Wacom
Wacom CLINIQ 21UX DTZ-2100 User manual
Wacom
Wacom Cintiq 24HD User manual
Wacom
Wacom DTI-520 User manual
Wacom
Wacom Cintiq Pro DTH-3220 User manual
Wacom
Wacom CINTIQ Cintiq13HD User manual
Wacom
Wacom DTK-2400 User manual
