Wacker Neuson G 43 User manual

Mobile Generator

G 43

OPERATOR’S MANUAL

0175257en 001

0608

0175257EN

G 43 Foreword

wc_tx000898gb.fm 3

Foreword

Machines

covered by

this manual

Machine

Documentation

Keep a copy of the Operator’s Manual with the machine at all times.

Use the separate Parts Book supplied with the machine to order replacement

parts.

If you are missing any of these documents, please contact Wacker Neuson

Corporation to order a replacement or visit www.wackerneuson.com.

When ordering parts or requesting service information, be prepared to provide

the machine model number, item number, revision number, and serial number.

Expectations

for

information in

this manual

This manual provides information and procedures to safely operate and

maintain the above Wacker Neuson model(s). For your own safety and to

reduce the risk of injury, carefully read, understand, and observe all instructions

described in this manual.

Wacker Neuson Corporation expressly reserves the right to make technical

modifications, even without notice, which improve the performance or safety

standards of its machines.

The information contained in this manual is based on machines manufactured

up until the time of publication. Wacker Neuson Corporation reserves the right

to change any portion of this information without notice.

notice

All rights, especially copying and distribution rights, are reserved.

This publication may be reproduced through photocopying by the original

purchaser of the machine. Any other type of reproduction is prohibited without

express written permission from Wacker Neuson Corporation.

Any type of reproduction or distribution not authorized by Wacker Neuson

Corporation represents an infringement of valid copyrights, and violators will be

prosecuted.

Trademarks

All trademarks referenced in this manual are the property of their respective

owners.

Machine Item Number

G 43 0620545

Foreword G 43

wc_tx000898gb.fm 4

G 43 Table of Contents

wc_bo0175257_001TOC.fm 5

Foreword 3

1 Safety Information 7

1.1 Signal Words Found in this Manual ...................................................... 7

1.2 Safety Instructions for Operating the Machine ..................................... 8

1.3 Safety Instructions for Towing ............................................................ 10

1.4 Safety Instructions for Servicing the Machine .................................... 11

1.5 Label Locations .................................................................................. 14

1.6 Label Meanings .................................................................................. 15

2 Transporting, Lifting, and Storing 16

2.1 Transporting ....................................................................................... 16

2.2 Storing ................................................................................................ 16

2.3 Lifting .................................................................................................. 17

3 Operating the Machine 19

3.1 Application .......................................................................................... 19

3.2 Control/Component Locations ............................................................ 20

3.3 Control/Component Descriptions ....................................................... 21

3.4 Control Panel/Microprocessor ............................................................ 22

3.5 Control Panel/Microprocessor Functions ........................................... 22

3.6 Main Control Switch Positions/Functions ........................................... 24

3.7 Preliminary Checklist .......................................................................... 26

3.8 Starting the Generator ........................................................................ 27

3.9 Stopping the Generator ...................................................................... 28

3.10 Connecting Loads to the Terminal Lugs ............................................. 29

3.11 Operating the Generator .................................................................... 30

3.12 Microprocessor Display Screens ........................................................ 31

4 Maintenance 34

4.1 Periodic Maintenance Schedule ......................................................... 34

4.2 Checking the Engine Oil ..................................................................... 35

Table of Contents G 43

wc_bo0175257_001TOC.fm 6

4.3 Changing the Engine Oil .....................................................................36

4.4 Changing Oil Filter ...............................................................................37

4.5 Changing the Fuel Filter ......................................................................38

4.6 Air Cleaner Discharge Valve ...............................................................39

4.7 Cleaning/Changing Air Filter Cartridges ..............................................40

4.8 Checking the Alternator V-Belt ............................................................41

4.9 Lubricating the Trailer ..........................................................................42

4.10 Cleaning the Engine ............................................................................43

4.11 Changing/Tensioning Alternator V-Belt ...............................................44

4.12 Checking/Adjusting Valve Clearances ................................................45

4.13 Checking Battery Electrolyte ...............................................................47

5 Schematics 48

5.1 Power Wiring .......................................................................................48

5.2 Power Wiring Components ..................................................................49

5.3 Engine Wiring ......................................................................................50

5.4 Engine Wiring Components .................................................................51

5.5 Socket Wiring ......................................................................................52

5.6 Socket Wirng Components ..................................................................53

5.7 Control Wiring ......................................................................................54

5.8 Control Wiring Components ................................................................55

6 Basic Troubleshooting 56

7 Technical Data 58

7.1 Machine ...............................................................................................58

7.2 Engine .................................................................................................59

7.3 Dimensions ..........................................................................................60

7.4 Sound Specification .............................................................................61

50Hz Mobile Generators Safety Information

wc_si000271gb.fm 7

1 Safety Information

1.1 Signal Words Found in this Manual

NOTICE: Used without the safety alert symbol, NOTICE indicates a situation

which, if not avoided, could result in property damage.

Note: Contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

fObey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

fObey all safety messages that follow this symbol to avoid injury or death.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

fObey all safety messages that follow this symbol to avoid possible injury or

death.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

fObey all safety messages that follow this symbol to avoid possible minor or

moderate injury.

Safety Information 50Hz Mobile Generators

wc_si000271gb.fm 8

1.2 Safety Instructions for Operating the Machine

Safety

devices,

controls, and

attachments

Only operate the machine when:

All safety devices and guards are in place and in working order.

All controls operate correctly.

The machine is set up correctly according to the instructions in the Operator’s

Manual.

The machine is clean.

The machine’s labels are legible.

To ensure safe operation of the machine:

Do not operate the machine if any safety devices or guards are missing or inop-

erative.

Do not modify or defeat the safety devices.

Do not use accessories or attachments that are not recommended by Wacker

Neuson Corporation.

Operator

training

Before operating the machine:

Read and understand the operating instructions contained in all manuals

delivered with the machine.

Familiarize yourself with the location and proper use of all controls and safety

devices.

Contact Wacker Neuson Corporation for additional training if necessary.

When operating this machine:

Do not allow improperly trained people to operate the machine. People

operating the machine must be familiar with the potential risks and hazards

associated with it.

Safe

operating

practices

When operating this machine:

Remain aware of the machine’s moving parts. Keep hands, feet, and loose

clothing away from the machine’s moving parts.

Wear protective clothing appropriate to the job site when operating the

machine.

Wear safety glasses when operating this machine.

Wear hearing protection when operating this machine.

When operating this machine:

Do not operate a machine in need of repair.

DANGER

Electric shock hazard. Backfeed from the generator into the public power distribu-

tion system can seriously injure or kill utility workers!

fConnections to a building’s electrical system must be made by a qualified elec-

trician and comply with all applicable laws and electrical codes.

50Hz Mobile Generators Safety Information

wc_si000271gb.fm 9

Work area

Be aware of the work area.

Keep unauthorized personnel, children, and pets away from the machine.

Remain aware of changing positions and the movement of other equipment

and personnel in the application area/job site.

Keep the machine at least one meter (three feet) away from structures, build-

ings, and other equipment during use.

Keep the area immediately surrounding and underneath the machine clean,

neat, and free of debris and combustible materials. Make sure that the area

overhead is clear of debris that could fall onto or into the machine or exhaust

compartment.

Make sure the machine is on a firm, level surface and will not tip, roll, slide, or

fall while operating.

Be aware of the application area.

Never operate the machine indoors unless exhaust fumes can be adequately

ventilated.

Never operate the machine in areas that contain flammable objects, fuels, or

products that produce flammable vapors.

Never operate the machine if you or the machine are in water.

Electrical

safety

To increase electrical safety while operating this machine, follow the procedures

below.

Do not operate the generator, or tools attached to the generator, with wet

hands.

Do not use worn electrical cords.

Make certain the machine is well-grounded and securely fastened to a good

earthen ground per national and local regulations.

Do not overload the generator. The total amperage of the tools and equipment

attached to the generator must not exceed the load rating of the generator.

Storing the

machine

Store the machine properly when it is not being used. The machine should be

stored in a clean, dry location out of the reach of children.

Safety Information 50Hz Mobile Generators

wc_si000271gb.fm 10

1.3 Safety Instructions for Towing

Hitch and

coupling

To reduce the possibility of an accident, perform the following before towing.

Check that the hitch and coupling on the vehicle are rated equal to, or greater

than, the trailer's “gross vehicle weight rating” (GVWR).

Inspect the hitch and coupling for wear or damage. DO NOT tow the trailer

using defective parts.

Make sure the coupling is securely fastened to the vehicle.

Connect the safety chains.

Connect the breakaway cable safety hook to the bumper or rear of the vehicle.

Do not attach it to the hitch.

Tires and

wheels

To reduce the possibility of an accident, perform the following before towing.

Check the condition, tread wear, and air pressure of the trailer tires. Replace

worn tires.

Check that the wheel lug nuts are tight and that none are missing.

Brakes and

lights

To reduce the possibility of an accident, perform the following before towing.

Test the brake linkage on the trailer and the brakes on the towing vehicle.

Make sure directional and trailer lights are connected and working properly.

WARNING

Towing a trailer requires special care. To reduce the possibility of an accident:

fBoth the trailer and the vehicle must be in good working condition.

fThe trailer and the vehicle must be securely fastened to each other.

Table of contents

Other Wacker Neuson Portable Generator manuals

Wacker Neuson

Wacker Neuson GH 3500 User manual

Wacker Neuson

Wacker Neuson GS 5.6A User manual

Wacker Neuson

Wacker Neuson GP 2500A User manual

Wacker Neuson

Wacker Neuson G2.5A Operating instructions

Wacker Neuson

Wacker Neuson GV 5000A User manual

Wacker Neuson

Wacker Neuson GP 3800A User manual

Wacker Neuson

Wacker Neuson G 100 User manual

Wacker Neuson

Wacker Neuson GP 4000 User manual

Wacker Neuson

Wacker Neuson GV 3800A User manual

Wacker Neuson

Wacker Neuson GP 6600A User manual

Wacker Neuson

Wacker Neuson GPS 9700 Operating instructions

Wacker Neuson

Wacker Neuson GV 7000A User manual

Wacker Neuson

Wacker Neuson G70 User manual

Wacker Neuson

Wacker Neuson G 240 User manual

Wacker Neuson

Wacker Neuson GPi 4300 User manual

Wacker Neuson

Wacker Neuson GS 12Ai User manual

Wacker Neuson

Wacker Neuson GP 3800A User manual

Wacker Neuson

Wacker Neuson GP 2500A User manual

Wacker Neuson

Wacker Neuson G 25 User manual

Wacker Neuson

Wacker Neuson GP 2500A User manual

Wacker Neuson

Wacker Neuson GPi 1700 User manual

Wacker Neuson

Wacker Neuson GPS 9700 User manual

Wacker Neuson

Wacker Neuson GP 4000 User manual

Wacker Neuson

Wacker Neuson GV 7003A User manual

Popular Portable Generator manuals by other brands

Kohler

Kohler 20EORZ Operation

Powerhorse

Powerhorse 83171 owner's manual

HURST

HURST ML-630-SI instruction manual

ETQ

ETQ TG4000 owner's manual

Briggs & Stratton

Briggs & Stratton 40265 Illustrated parts list

ConMed

ConMed 7550 Service manual

Owon

Owon Waveform Generator manual

evertz

evertz 7700 Series manual

Power Stroke

Power Stroke PS906025 Operator's manual

Firefly

Firefly Cygnus CYG2400/460/24 user manual

Draper

Draper PG950S Instructions for

PowerBoss

PowerBoss PowerBoss Operator's manual

SDMO

SDMO SH 4000 Generating set user and maintenance manual

EINHELL

EINHELL STE 5500 operating instructions

Wanco

Wanco WI3000P Operator's manual

Full Boar

Full Boar FBT-3300 instruction manual

Dwyer Instruments

Dwyer Instruments ASG manual

Westinghouse

Westinghouse WH1000i Series owner's manual