WAC Lighting 6011 User manual

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. 1

waclighting.com

Phone (800) 526.2588

Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive

Port Washington, NY 11050

Central Distribution Center

1600 Distribution Ct

Lithia Springs, GA 30122

Western Distribution Center

1750 Archibald Avenue

Ontario, CA 91760

INSTALLATION INSTRUCTION

PATH LIGHT

6011 / 6021 / 6031 / 6041 / 6051 / 6061 / 6071 / 6081 / 6091 / 6321 / 6311

SAFETY INSTRUCTION

IMPORTANT: NEVER attempt any work without shutting o the electricity.

• Read all instructions before installing.

• System is intended for installation by a qualied electrician in accordance with the National Electrical Code and local regulations.

• Place the wall switch in the“OFF”position.

• Go to the main fuse box, or circuit breaker. Unscrew the fuse(s) or switch ”OFF”the circuit breaker switch(es) that control the power to the

space that you are working on.

WARNING: Risk of electric shock. Install all luminaires 10 feet (3.05 m) or more from a pool, spa, or fountain.

CAUTION:

All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn out

or broken. Failure to follow this instruction could invalidate the ETL/cETL listing of this xture.

AVERTISSEMENT

IMPORTANT : COUPEZ L’ÉLECTRICITÉ AVANT TOUTE MANIPULATION.

• Lisez toutes les instructions avant d’installer.

• Système est destiné à être installé par un électricien qualié en conformité avec le code national de l’électricité et les règlements locaux.

• Placez l’interrupteur mural en position d’arrêt (« OFF »).

• Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).

MISE EN GARDE

Toutes les pièces doivent être utilisées tel qu’il est indiqué dans ces instructions. Ne remplacez pas les pièces, n’en laissez pas de côté et ne les

utilisez pas si elles sont usées ou brisées. Le non-respect de ces instructions peut annuler l’homologation ETL/cETL du luminaire.

THIS INSTRUCTIONS APPLY TO THE MODELS BELOW:

6031

Mounting Accessories (included in box)

6021

Mounting Stake

Qty: 1pc

7TVD207001BW

Outdoor Rated Wire Nut

Qty: 2pcs

7EAC352401

Guardian Mount 9000-SP9-BZ

Qty: 1pcs

(Included in 6031-BBR nish only)

6011 6041 6051 6061

6071 6081 6091 6321 6311

*Note: Transformer is required to power the xture. (sold separately)

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. 2

waclighting.com

Phone (800) 526.2588

Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive

Port Washington, NY 11050

Central Distribution Center

1600 Distribution Ct

Lithia Springs, GA 30122

Western Distribution Center

1750 Archibald Avenue

Ontario, CA 91760

INSTALLATION

STEP 1:

1. Make sure your main power is o.

2. At the point of installation, mount the stake by placing

a piece of wood on the stake and hammering the wood.

Hammer till the bottom of the ring is ush with the ground.

3. In the case of hard soil, dig a hole and place the stake in

so that the bottom of the ring is ush with the ground.

Fill the rest of the hole with the removed soil and pack it

tight to secure the stake.

4. Screw the xture onto the stake provided, leading the wire

from the xture through the wire slot in the stake.

STEP 2:

5. Cut the power supply wire from the transformer at the

location of the xture.

6. Separate the power supply wire into two individual wires

by lightly pulling on each side so that a couple inches is

separated.

7. Strip o ½ inch of the insulating material from each wire and

connect one to each of the wires from the xture using the

outdoor rated direct burial wire nuts provided.

STEP 3:

8. Screw the xture onto the stake provided, leading the wire

from the xture through the wire slot in the stake.

9. If desired, bury your wire by digging a small trench. Close the

trench by applying an inward force to both sides of the trench.

10. Repeat steps for other xtures in the same electrical circuit.

11. Turn the main power supply back on and make sure the

xtures light up.

Hammer

Wood

Mounting Stake

Soil

Transformer

To Next Fixture

Mounting Stake

Fixture Wires

Supply Wire between Fixtures

Wire Slot

Path Lighting

Fixture

Path LightingFixture

Note: To install multiple xtures, also connect the power supply wire of each

additional xture to the connection described in 7 of the previous xture.

INSTALLATION INSTRUCTION

PATH LIGHT

6011 / 6021 / 6031 / 6041 / 6051 / 6061 / 6071 / 6081 / 6091 / 6321 / 6311

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. 3

waclighting.com

Phone (800) 526.2588

Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive

Port Washington, NY 11050

Central Distribution Center

1600 Distribution Ct

Lithia Springs, GA 30122

Western Distribution Center

1750 Archibald Avenue

Ontario, CA 91760

INSTALLING THE SURFACE MOUNT ACCESSORY

Softscape Installation:

1. Attach the three removable spikes to the surface mount

accessory by screwing them in.

2. Using a piece of wood to buer the impact, hammer the

assembled mount into the soil till the bottom of the surface

mount accessory is ush with the ground.

3. Lead your wire through the wire slot and screw in your xture.

4. Connect xture wires to power supply wires as normal using

the outdoor rated direct burial wire nuts provided.

Hardscape Installation:

1. Mount the accessory to the surface using No. 10 Philips head

screws that are at least half an inch long.

2. If mounting on concrete or something similar, rst use

plastic anchors sized for No. 10 screws.

3. Create a route underneath the accessory for your wire to

travel through.

4. Lead your wire through the created route and screw your

xture onto the surface mount accessory.

Installing Fixture Caps:

Thread the xture cap into the stem body by rotating it clockwise.

Fixture

Surface Mount

Accessory

Wire Slot

Removable Spike

No.10 Mounting Screw

Surface Mount

6011

Threaded Stem Cap Threaded Stud Cap

6041

Threaded Stud Cap

6051

INSTALLATION INSTRUCTION

PATH LIGHT

6011 / 6021 / 6031 / 6041 / 6051 / 6061 / 6071 / 6081 / 6091 / 6321 / 6311

This manual suits for next models

Other WAC Lighting Lighting Equipment manuals

WAC Lighting

WAC Lighting Silo X10 User manual

WAC Lighting

WAC Lighting M6000-STAKE User manual

WAC Lighting

WAC Lighting dweLED FM-96916 User manual

WAC Lighting

WAC Lighting BA-FT08-WT User manual

WAC Lighting

WAC Lighting WS-90627 User manual

WAC Lighting

WAC Lighting LD-700MA03-EDIM-IS User manual

WAC Lighting

WAC Lighting dweLED 299-LED Wall Sconce User manual

WAC Lighting

WAC Lighting HTK-793 User manual

WAC Lighting

WAC Lighting WT-RT User manual

WAC Lighting

WAC Lighting WTK-6010 Series User manual

WAC Lighting

WAC Lighting LED-350MA03-RB User manual

WAC Lighting

WAC Lighting InvisiLED CCT 100 User manual

WAC Lighting

WAC Lighting Falcon Series User manual

WAC Lighting

WAC Lighting LED-TC Series User manual

WAC Lighting

WAC Lighting Modern Forms 708-LED User manual

WAC Lighting

WAC Lighting InvisiLED Classic LED-T24 User manual

WAC Lighting

WAC Lighting Volta 2" LED Series User manual

WAC Lighting

WAC Lighting 5221 User manual

WAC Lighting

WAC Lighting LD-700MA03-EDIM-IS User manual

WAC Lighting

WAC Lighting GATE 12V User manual

WAC Lighting

WAC Lighting HR-3LED-H20A User manual

WAC Lighting

WAC Lighting H-LED160 User manual

WAC Lighting

WAC Lighting Paloma MO-LED512 User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions