Vortec P-10M User manual

P-10M Bike Manual

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS EXERCISE EQUIPMENT.

* Keep children off your bike at all times.

* When the bike is in use, young childred and pets should be kept at least 10 feet away.

* Use this bike only for its intended use as described in the manual.

* Keep your hands away from all moving parts, Never turn the pedal crank arms by hand.

* Do not remove your feet from the pedals while they are in motion.

* After exercising, push down on the tension knob or turn the tension knob in a clockwise

direction to slow the flywheel down and decrease the potential for injury.

* Do not dismount the bike until both the pedals and flywheel have come to a complete

stop.

* Do not attempt to use this bike at high speeds or in standing positions until you have

practiced and are comfortable at lower speeds.

* Rotate the tension konb clockwise to add resistance to the flywheel prior to standing

on the pedals.

* Never drop or insert any object into any opening on this bike.

* Do not use without proper footwear.

To assure that the safety level of this bike is maintained, examine components for wear

and tear on a regular basis. Components that are worn excessively or inoperable should

be replaced immediately or the bike should be put out of use until it is repaired.

Caution:

if you experience chest pains, nausea, dizziness or shortness of breath, stop exercising

immediately and consult your physician before continuing.

P-10M – INSTRUCTIONS FOR USE

1) The model P-10M bike is designed to be used as a group cycle in fitness studios and

health clubs. It has a fixed wheel driven flywheel and should only be used under

professional supervision.

2) Installation – it is important that the P-10M bike is correctly assembled and we recommend

that installation and assembly be carried out by suitably qualified personnel.

3) Handlebar and seat adjustment. It is important that the handlebar and seat are set at the height

correct for your body. Ask your instructor for assistance.

Adjusting the handlebar height - Make sure it is securely tightened and that there is no lateral or

vertical movement of the handlebar. Undo the Quick Release lever which is located in front of

main tube. Slide stem tube in upward or downward to the required height position then

re-tighten again .

Adjusting the seat height – refer to above mention.

The stem/sliding tube position can also be adjusted forwards or backwards. Undo the Quick Release

lever located underneath of the bottom of sliding tube .

Slide the handlebar/top sliding tube in forwards or backwards until reach the required position then

securely re-tighten the Quick Release lever.

The seat/slider position can also be adjusted forwards or backwards. Undo the Quick Release

lever located underneath of the bottom slider.

Slide the seat/top slider forwards or backwards until reach the required position then securely

re-tighten the Quick Release lever.

NOTE: there is a safety line engraved on the seat post and handlebar stem. On no

account should the seat post or handlebar stem ever be raised above this line.

4) Pedals and toestraps – your feet should be securely positioned in the toe clips during the

exercise. Put your foot as far forward as you can into the toe-clip and then pull the strap tight.

5) Resistance system- P-10M bike is with durable belt direct drive transmission system, to

adjust the exercising resistance on the completed spinning bike, undo the simply loosen or

tighten using control lever to make adjustment.

For emergency stop then push control lever up-ward to the hardest position for stopping the wheel.

6) The P-10M bike should operate on a level surface with no lateral movement.

There are height adjust pads located on either side underneath of front and rear ground tube .

7) Maintenance – like any other mechanical cycling device, the P-10M bike should be regularly

maintained. Ask your supplier for a detailed mantenance programme.

P-10M ASSEMBLY DIAGRAMS

476R

76L

P-10M ASSEMBLY

Step 1 (foot)

Attach the front foot (7) to the frame using the bolt (3) and washer (4).

Step 2 (foot)

Attach the rear foot (2) to the frame using the bolt (3) and washer (4).

Step 3. (pedals)

attach the pedals (76R/76L) into the crank arms (70R/70L), each pedal

is marked with the letter R(right) or R(right) to denote the side of the bike

they are on. NOTE: the right hand crank is on the same side as the

chain cover (78R). Be careful to align the threads correctly to avoid any

damaged. A little grease on the thread should help the pedals to screw in

easily and correctly, tighten using a 15mm spanner, both pedals threads

should tighten towards the front of the bike.

STEP 1

STEP 2

STEP 3

Step 4. &5 (handlebar & stem) and Console assemble

Insert stem into frame main tube then adjust handlebar stem (16) to a proper position

then using lock lever (21) to fixed .

Open safety screw(73) on the stem sliding tube then insert handlebar(11) onto stem's

sliding tube , move handlebar forward or backward until at a propor position then

use sliding tube's lock lever(21) to fix it and screw back the safety screw(73) .

Assemble console with cable and fix it onto bracket :

Unscrew console's fixing screw (8) from the console .

Connect cable (92) with console(9) then fix console on the bracket by screw back

4 fixing screw (8) .

Note:Be careful on the cable(92) do not be damage during it connect with the console

to assemble on the bracket .

STEP 4

STEP 5

Step 6&7. (saddle & seat post)

Insert seat post (32) into frame's seat tube and move upward or downward until at

a propor position then use stem lock lever(21) to fix it .

Assembly saddle (23) on saddle top slider (30) , sliding saddle in forward or backward

until at a propor postioon then use lock lever (31) to fix it .

NOTE: Do not arise above safety line.

Step 8. (bottle cage)

Attach bottle cage(14) on handlebar bottle hold bracket then use 2 screw

(13) to fix bottle cage on the bracket by a 4mm allen key .

STEP 6

STEP 7

STEP 8

P - 10M PART LIST

NO. Unit

UnitUnit

Unit Q'ty

Q'tyQ'ty

Q'ty Remark

RemarkRemark

Remark

1Frame

FrameFrame

Frame KIT 1

2Rear Ground Tube 60*86*3T*545L

Rear Ground Tube 60*86*3T*545LRear Ground Tube 60*86*3T*545L

Rear Ground Tube 60*86*3T*545L PCS 1

3Bolt M10×P1.5×30L

Bolt M10×P1.5×30LBolt M10×P1.5×30L

Bolt M10×P1.5×30L PCS 4 CP

CPCP

4Washer

WasherWasher

Washer ψ

ψψ

ψ22×

22×22×

22×ψ

ψψ

ψ10×2t

10×2t10×2t

10×2t PCS 4 CP

CPCP

5Adjustable Foot Pad M10×P1.5

Adjustable Foot Pad M10×P1.5Adjustable Foot Pad M10×P1.5

Adjustable Foot Pad M10×P1.5 PCS 4

6Foot Tube's End Cap 60×86

Foot Tube's End Cap 60×86Foot Tube's End Cap 60×86

Foot Tube's End Cap 60×86 PCS 4

7Front Foot Tube 60×86×3t×545L

Front Foot Tube 60×86×3t×545LFront Foot Tube 60×86×3t×545L

Front Foot Tube 60×86×3t×545L PCS 1

8Screw M5×P0.8×10L Stainless

Screw M5×P0.8×10L StainlessScrew M5×P0.8×10L Stainless

Screw M5×P0.8×10L Stainless PCS 4

9Vortec #8109 Consol

Vortec #8109 Consol Vortec #8109 Consol

Vortec #8109 Consol PCS 1

10 Handlebar sliding tube's F/R sleeve

Handlebar sliding tube's F/R sleeveHandlebar sliding tube's F/R sleeve

Handlebar sliding tube's F/R sleeve PCS 2

11 Handlebar Set

Handlebar SetHandlebar Set

Handlebar Set KIT 1

12 "V" locking piece 23*23L

"V" locking piece 23*23L"V" locking piece 23*23L

"V" locking piece 23*23L PCS 1 Stainless

StainlessStainless

Stainless

13 Water Bottle Cage fix Screw M5×P0.8)

Water Bottle Cage fix Screw M5×P0.8)Water Bottle Cage fix Screw M5×P0.8)

Water Bottle Cage fix Screw M5×P0.8) PCS 2 Stainless

StainlessStainless

Stainless

14 Water Bottle Cage UL-127A

Water Bottle Cage UL-127AWater Bottle Cage UL-127A

Water Bottle Cage UL-127A PCS 1

15 Stem's sliding tube's plastic end cap

Stem's sliding tube's plastic end capStem's sliding tube's plastic end cap

Stem's sliding tube's plastic end cap PCS 1

16 Stem

StemStem

Stem KIT 1 Alloy

Alloy Alloy

Alloy

17 Main tube &seat tube's Sleeve

Main tube &seat tube's SleeveMain tube &seat tube's Sleeve

Main tube &seat tube's Sleeve PCS 2 BK

BKBK

18 Main Tube's Seal Ring 40×97

Main Tube's Seal Ring 40×97 Main Tube's Seal Ring 40×97

Main Tube's Seal Ring 40×97 PCS 2 BK

BKBK

19 "V" Lock piece

"V" Lock piece"V" Lock piece

"V" Lock piece ψ

ψψ

ψ23×24L

23×24L23×24L

23×24L PCS 2

20 Washer

WasherWasher

Washer ψ

ψψ

ψ22×

22×22×

22×ψ

ψψ

ψ10×2t

10×2t10×2t

10×2t PCS 2 CP

CPCP

21 Main tube & S/T's Lock Lever

Main tube & S/T's Lock Lever Main tube & S/T's Lock Lever

Main tube & S/T's Lock Lever PCS 3 CP

CPCP

22 Set Screw M6×P0.8×8L W/ Locktile

Set Screw M6×P0.8×8L W/ LocktileSet Screw M6×P0.8×8L W/ Locktile

Set Screw M6×P0.8×8L W/ Locktile PCS 3 CP

CPCP

23 Saddle

SaddleSaddle

Saddle PCS 1

24 Seat post upper slider's End Cap

Seat post upper slider's End CapSeat post upper slider's End Cap

Seat post upper slider's End Cap PCS 1 BK

BKBK

25 Seat Post Bottom Slider's End Cap

Seat Post Bottom Slider's End CapSeat Post Bottom Slider's End Cap

Seat Post Bottom Slider's End Cap PCS 1 BK

BKBK

26 Stem Upper Slider's End Cap

Stem Upper Slider's End CapStem Upper Slider's End Cap

Stem Upper Slider's End Cap PCS 1 BK

BKBK

27 Stem Bottom Slider's End Cap

Stem Bottom Slider's End CapStem Bottom Slider's End Cap

Stem Bottom Slider's End Cap PCS 1 BK

BKBK

28 Screw M6×P1.0×10L

Screw M6×P1.0×10LScrew M6×P1.0×10L

Screw M6×P1.0×10L PCS 3 Stainless

StainlessStainless

Stainless

29 Floating piece

Floating piece Floating piece

Floating piece ψ

ψψ

ψ22×

22×22×

22×ψ

ψψ

ψ9.5×15

9.5×159.5×15

9.5×15 PCS 1 Stainless

StainlessStainless

Stainless

30 Rear top slider

Rear top sliderRear top slider

Rear top slider KIT 1 Alloy

Alloy Alloy

Alloy

31 Lock Lever M12×P1.75×22L×

Lock Lever M12×P1.75×22L×Lock Lever M12×P1.75×22L×

Lock Lever M12×P1.75×22L× ψ

ψψ

ψ8×10L

8×10L8×10L

8×10L PCS 1

32 Seat Post

Seat PostSeat Post

Seat Post KIT 1 Alloy

AlloyAlloy

Alloy

33 Fly Wheel Axle

Fly Wheel AxleFly Wheel Axle

Fly Wheel Axle ψ

ψψ

ψ25×

25×25×

25×ψ

ψψ

ψ20×155.5L

20×155.5L20×155.5L

20×155.5L PCS 1

34 Bearing 6004 ZZ SKF

Bearing 6004 ZZ SKFBearing 6004 ZZ SKF

Bearing 6004 ZZ SKF PCS 2

35 Cast Wheel

Cast WheelCast Wheel

Cast Wheel ψ

ψψ

ψ359.8×

359.8×359.8×

359.8× ψ

ψψ

ψ334.7×86t×5PK

334.7×86t×5PK334.7×86t×5PK

334.7×86t×5PK PCS 1

36 Alloy Ring

Alloy RingAlloy Ring

Alloy Ring ψ

ψψ

ψ450×

450×450×

450×ψ

ψψ

ψ360×16t

360×16t360×16t

360×16t PCS 1

37 Fly wheel axle's Sleeve

Fly wheel axle's SleeveFly wheel axle's Sleeve

Fly wheel axle's Sleeve ψ

ψψ

ψ24×

24×24×

24×ψ

ψψ

ψ20.1×56L

20.1×56L20.1×56L

20.1×56L PCS 1 CP

CPCP

38 Nut M17×P1.0×8t

Nut M17×P1.0×8tNut M17×P1.0×8t

Nut M17×P1.0×8t PCS 2 CP

CPCP

39 Screw M5×P0.8×10L

Screw M5×P0.8×10LScrew M5×P0.8×10L

Screw M5×P0.8×10L PCS 5 Black

BlackBlack

Black

40 Nut M12×P1.25×9t

Nut M12×P1.25×9tNut M12×P1.25×9t

Nut M12×P1.25×9t PCS 2 CP

CPCP

Item/Description

Item/DescriptionItem/Description

Item/Description

NO. Unit

UnitUnit

Unit Q'ty

Q'tyQ'ty

Q'ty Remark

RemarkRemark

Remark

41 Washer

WasherWasher

Washer ψ

ψψ

ψ27×

27×27×

27×ψ

ψψ

ψ13×3t

13×3t13×3t

13×3t PCS 2 CP

CPCP

42 Washer

WasherWasher

Washer ψ

ψψ

ψ10×

10×10×

10×ψ

ψψ

ψ6×1t

6×1t6×1t

6×1t PCS 4 UCP

UCPUCP

UCP

43 Bolt M6×P1.0×50L

Bolt M6×P1.0×50LBolt M6×P1.0×50L

Bolt M6×P1.0×50L PCS 2

44 Cover for Magnet's Bass:31×88.7×2t

Cover for Magnet's Bass:31×88.7×2tCover for Magnet's Bass:31×88.7×2t

Cover for Magnet's Bass:31×88.7×2t KIT 2

45 Magnet

MagnetMagnet

Magnet ψ

ψψ

ψ25×10t ,Identify

25×10t ,Identify25×10t ,Identify

25×10t ,Identify：+ -

：+ - ：+ -

：+ - pole .

pole .pole .

pole . PCS 6

46 Plastic Bass for Magnet Set

Plastic Bass for Magnet SetPlastic Bass for Magnet Set

Plastic Bass for Magnet Set KIT 1

47 Magnet's Set Inner Sleeve .

Magnet's Set Inner Sleeve .Magnet's Set Inner Sleeve .

Magnet's Set Inner Sleeve . PCS 1 Stainless

StainlessStainless

Stainless

48 Screw M6×P1.0×35L

Screw M6×P1.0×35LScrew M6×P1.0×35L

Screw M6×P1.0×35L PCS 1 Stainless

StainlessStainless

Stainless

49 Nut w/Nylon insert M6×P1.0

Nut w/Nylon insert M6×P1.0Nut w/Nylon insert M6×P1.0

Nut w/Nylon insert M6×P1.0 PCS 2 cp

cpcp

50 Magnet's set Fix plate

Magnet's set Fix plate Magnet's set Fix plate

Magnet's set Fix plate PCS 1 Nylon

NylonNylon

Nylon

51 Sleeve

SleeveSleeve

Sleeve ψ

ψψ

ψ8×15L

8×15L8×15L

8×15L PCS 1 Stainless

StainlessStainless

Stainless

52 Screw M5×P0.8×6L

Screw M5×P0.8×6LScrew M5×P0.8×6L

Screw M5×P0.8×6L PCS 2 Stainless

StainlessStainless

Stainless

53 Cable connecting bar

Cable connecting barCable connecting bar

Cable connecting bar ψ

ψψ

ψ10×54 .

10×54 .10×54 .

10×54 . PCS 1 Stainless

StainlessStainless

Stainless

54 Pully

PullyPully

Pully ψ

ψψ

ψ18×

18×18×

18×ψ

ψψ

ψ9.5×13.7L

9.5×13.7L9.5×13.7L

9.5×13.7L PCS 1 UCP

UCPUCP

UCP

55 Spring fixing Axle

Spring fixing AxleSpring fixing Axle

Spring fixing Axle ψ

ψψ

ψ9×20L .

9×20L .9×20L .

9×20L . PCS 2 CP

CPCP

56 Screw M5×P0.8×5L

Screw M5×P0.8×5LScrew M5×P0.8×5L

Screw M5×P0.8×5L PCS 4 CP

CPCP

57 Rebound Spring .

Rebound Spring .Rebound Spring .

Rebound Spring . PCS 1

58 Screw M5×P0.8×15L

Screw M5×P0.8×15LScrew M5×P0.8×15L

Screw M5×P0.8×15L PCS 4 Stainless

StainlessStainless

Stainless

59 Adjusting wire for tune adjustment .

Adjusting wire for tune adjustment .Adjusting wire for tune adjustment .

Adjusting wire for tune adjustment . KIT 1

60 PUMoving Wheel

PUMoving WheelPUMoving Wheel

PUMoving Wheel ψ

ψψ

ψ76×24t×85A Hardness.

76×24t×85A Hardness.76×24t×85A Hardness.

76×24t×85A Hardness. PCS 2

61 Bearing 608ZZ

Bearing 608ZZ Bearing 608ZZ

Bearing 608ZZ PCS 4

62 Nut

NutNut

Nutψ

ψψ

ψ8×30L

8×30L8×30L

8×30L PCS 2 CP

CPCP

63 Screw M6×P1.0×12L.

Screw M6×P1.0×12L.Screw M6×P1.0×12L.

Screw M6×P1.0×12L. PCS 2 CP

CPCP

64 B.B Sleeve

B.B SleeveB.B Sleeve

B.B Sleeve ψ

ψψ

ψ24×

24×24×

24×ψ

ψψ

ψ20.1×23.1L

20.1×23.1L20.1×23.1L

20.1×23.1L PCS 1 UCP

UCPUCP

UCP

65 Bearing 6204 ZZ SKF

Bearing 6204 ZZ SKFBearing 6204 ZZ SKF

Bearing 6204 ZZ SKF PCS 2

66 Nut w/Nylon Insert M20×P1.0

Nut w/Nylon Insert M20×P1.0Nut w/Nylon Insert M20×P1.0

Nut w/Nylon Insert M20×P1.0 PCS 1 BK

BKBK

67 B.B Axle

B.B AxleB.B Axle

B.B Axle ψ

ψψ

ψ25×

25×25×

25×ψ

ψψ

ψ20×141.5L .

20×141.5L .20×141.5L .

20×141.5L . PCS 1

68 Belt Pully

Belt PullyBelt Pully

Belt Pully ψ

ψψ

ψ265×5PK.

265×5PK.265×5PK.

265×5PK. PCS 1 BK

BKBK

69 BB axle's Dusty Cover

BB axle's Dusty Cover BB axle's Dusty Cover

BB axle's Dusty Cover PCS 1 BK

BKBK

70L Crank for Left side.

Crank for Left side.Crank for Left side.

Crank for Left side. PCS 1

70R Crank for Right Side .

Crank for Right Side .Crank for Right Side .

Crank for Right Side . PCS 1

71 Spring Washer

Spring WasherSpring Washer

Spring Washer ψ

ψψ

ψ10

1010

10 PCS 4 CP

CPCP

72 Screw M10×P1.5×15L

Screw M10×P1.5×15LScrew M10×P1.5×15L

Screw M10×P1.5×15L PCS 4 Stainless

StainlessStainless

Stainless

73 Alen key bolt M5*P0.8*10L

Alen key bolt M5*P0.8*10LAlen key bolt M5*P0.8*10L

Alen key bolt M5*P0.8*10L PCS 1

74 Flange Nuty M10×P1.25×7t

Flange Nuty M10×P1.25×7tFlange Nuty M10×P1.25×7t

Flange Nuty M10×P1.25×7t PCS 2 BK

BKBK

75 Dusty Cover

Dusty Cover Dusty Cover

Dusty Cover PCS 2 BK

BKBK

76L LU-214 alloy body w/ toe clip& strap.

LU-214 alloy body w/ toe clip& strap.LU-214 alloy body w/ toe clip& strap.

LU-214 alloy body w/ toe clip& strap. PCS 1

76R LU-214 alloy body w/ toe clip& strap.

LU-214 alloy body w/ toe clip& strap.LU-214 alloy body w/ toe clip& strap.

LU-214 alloy body w/ toe clip& strap. PCS 1

77 Belt 5PK(1180)

Belt 5PK(1180)Belt 5PK(1180)

Belt 5PK(1180) PCS 1

78L Left Out Cover

Left Out CoverLeft Out Cover

Left Out Cover PCS 1 BK,ABS

BK,ABSBK,ABS

BK,ABS

78R Right Out Cover

Right Out CoverRight Out Cover

Right Out Cover PCS 1 BK,ABS

BK,ABSBK,ABS

BK,ABS

79 POP Cover

POP CoverPOP Cover

POP Cover PCS 2 TPR

TPRTPR

TPR

80 Screw M5×P0.8×10L

Screw M5×P0.8×10LScrew M5×P0.8×10L

Screw M5×P0.8×10L PCS 5 BK

BKBK

Item/Description

Item/DescriptionItem/Description

Item/Description

NO. Unit

UnitUnit

Unit Q'ty

Q'tyQ'ty

Q'ty Remark

RemarkRemark

Remark

81 Battery cover

Battery coverBattery cover

Battery cover PCS 1 ABS

ABSABS

ABS

82 Screw M6×P1.0×10L

Screw M6×P1.0×10LScrew M6×P1.0×10L

Screw M6×P1.0×10L PCS 1 Stainless

StainlessStainless

Stainless

83 Screw M5×P0.8×15L

Screw M5×P0.8×15LScrew M5×P0.8×15L

Screw M5×P0.8×15L PCS 6 Stainless

StainlessStainless

Stainless

84 RV adjusting lever 3t

RV adjusting lever 3tRV adjusting lever 3t

RV adjusting lever 3t PCS 1 UCP

UCPUCP

UCP

85 Alen bolt M8×P1.25×20L

Alen bolt M8×P1.25×20LAlen bolt M8×P1.25×20L

Alen bolt M8×P1.25×20L PCS 1 UCP

UCPUCP

UCP

86 Adjustment's Bolt M6×9.5×31.7L

Adjustment's Bolt M6×9.5×31.7LAdjustment's Bolt M6×9.5×31.7L

Adjustment's Bolt M6×9.5×31.7L PCS 2 UCP

UCPUCP

UCP

87 Battery case

Battery caseBattery case

Battery case PCS 1 Plastic

PlasticPlastic

Plastic

87A

87A87A

87A Battery

BatteryBattery

Battery

pcs

pcs pcs

pcs

88 Nut w/Nylon Insert M6×P1.0

Nut w/Nylon Insert M6×P1.0Nut w/Nylon Insert M6×P1.0

Nut w/Nylon Insert M6×P1.0 PCS 1 CP

CPCP

89 Washer

WasherWasher

Washer ψ

ψψ

ψ16×

16×16×

16×ψ

ψψ

ψ8.5×1.5t

8.5×1.5t8.5×1.5t

8.5×1.5t PCS 8 UCP

UCPUCP

UCP

90 Nut W/Nylon Insert M8×P1.25

Nut W/Nylon Insert M8×P1.25 Nut W/Nylon Insert M8×P1.25

Nut W/Nylon Insert M8×P1.25 PCS 3 UCP

UCPUCP

UCP

91 RV fix bracket 3t

RV fix bracket 3tRV fix bracket 3t

RV fix bracket 3t PCS 1 UCP

UCPUCP

UCP

92 Console's connect wire

Console's connect wireConsole's connect wire

Console's connect wire PCS 1 UCP

UCPUCP

UCP

93 Screw M8×P1.25×60L

Screw M8×P1.25×60LScrew M8×P1.25×60L

Screw M8×P1.25×60L PCS 2 UCP

UCPUCP

UCP

94 Inner Sleeve

Inner SleeveInner Sleeve

Inner Sleeve ψ

ψψ

ψ12×

12×12×

12×ψ

ψψ

ψ8.5×4t

8.5×4t8.5×4t

8.5×4t PCS 2 UCP

UCPUCP

UCP

95 VR w/cable

VR w/cableVR w/cable

VR w/cable PCS 1

96 KIT 4

97 pc 1

98 Adjusting wire

Adjusting wireAdjusting wire

Adjusting wire PCS 1

99 Screw M2.5*15L

Screw M2.5*15LScrew M2.5*15L

Screw M2.5*15L PCS 2 CP

CPCP

100 Alen bolt M6*1.0*40L

Alen bolt M6*1.0*40LAlen bolt M6*1.0*40L

Alen bolt M6*1.0*40L PCS 1 CP

CPCP

101 Washer 20*6.5*2t

Washer 20*6.5*2tWasher 20*6.5*2t

Washer 20*6.5*2t PCS 2 CP

CPCP

102 Spring 4*9L*3

Spring 4*9L*3Spring 4*9L*3

Spring 4*9L*3 PCS 1 CP

CPCP

103 lock pin 4*2.6*2*10L

lock pin 4*2.6*2*10Llock pin 4*2.6*2*10L

lock pin 4*2.6*2*10L PCS 1 CP

CPCP

104 Cable roller's fixing washer

Cable roller's fixing washerCable roller's fixing washer

Cable roller's fixing washer PCS 2 UCP

UCPUCP

UCP

105 Left roller's fixing plate

Left roller's fixing plateLeft roller's fixing plate

Left roller's fixing plate PCS 1 UCP

UCPUCP

UCP

106 Cable pulling roller

Cable pulling rollerCable pulling roller

Cable pulling roller PCS 1 Blk

BlkBlk

Blk

107 Right roller's fixing plate

Right roller's fixing plate Right roller's fixing plate

Right roller's fixing plate PCS 1 UCP

UCPUCP

UCP

108 Screw M4×P0.7×8L

Screw M4×P0.7×8LScrew M4×P0.7×8L

Screw M4×P0.7×8L PCS 4 UCP

UCPUCP

UCP

109 Screw M3×10L

Screw M3×10LScrew M3×10L

Screw M3×10L PCS 4 UCP

UCPUCP

UCP

110L PCS 1 Plastic

PlasticPlastic

Plastic

110R

PCS 1 Plastic

PlasticPlastic

Plastic

111 Sensor fixing bracket for SR212

Sensor fixing bracket for SR212 Sensor fixing bracket for SR212

Sensor fixing bracket for SR212 PCS 1

112 Sensor w/Cable:

Sensor w/Cable:Sensor w/Cable:

Sensor w/Cable: ψ

ψψ

ψ6×300L×46mm(2PIN)

6×300L×46mm(2PIN)6×300L×46mm(2PIN)

6×300L×46mm(2PIN) PCS 1

113 Plastic end seal cover

Plastic end seal cover Plastic end seal cover

Plastic end seal cover pcs 2Plastic

PlasticPlastic

Plastic

114 Top tube's protector

Top tube's protector Top tube's protector

Top tube's protector PCS 1 Plastic

PlasticPlastic

Plastic

Resistanceright side adjusting lever

Resistanceright side adjusting leverResistanceright side adjusting lever

Resistanceright side adjusting lever

VR fix screw

VR fix screwVR fix screw

VR fix screw

sleeve 12*15,2*8L

sleeve 12*15,2*8Lsleeve 12*15,2*8L

sleeve 12*15,2*8L

Resistance left side adjusting lever

Resistance left side adjusting leverResistance left side adjusting lever

Resistance left side adjusting lever

Item/Description

Item/DescriptionItem/Description

Item/Description

Other Vortec Exercise Bike manuals

Vortec

Vortec Magnetic Bike M900 User manual

Popular Exercise Bike manuals by other brands

Weslo

Weslo Vector 302 Bedienungsanleitung

TOORX

TOORX BRX85 Instruction

Matrix

Matrix KranKcycle user manual

Matrix

Matrix IC3 manual

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 user manual

Monark

Monark 827E instruction manual

Stamina

Stamina 1310 owner's manual

American Fitness

American Fitness SPR-BK1072A owner's manual

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Service manual

BH FITNESS

BH FITNESS H9158H Instructions for assembly and use

Body Sculpture

Body Sculpture BC-7220G manual

Cateye

Cateye EC-2300 manual

FYTTER

FYTTER RACER RC MSR user manual

Kikos

Kikos HM-9090M user manual

Pro-Form

Pro-Form 345 Zlx Bike Manual Del Usuario

Fuel Fitness

Fuel Fitness SU135-40 owner's manual

NordicTrack

NordicTrack Gxr 4.2 Bike Manuel de l'utilisateur

Vision Fitness

Vision Fitness U70 Service manual