Vornado 7803 User manual

7803 Stand Assembly Instructions

1.

2.

Surface Preperation

Gently place the unit’s head face down on the

ground. Use a towel or other soft material to avoid

scratching or damaging the unit. Make sure the

surface area is flat.

Installing Tube

Insert power cord into the top of

Tube and pull through the bottom.

Align the Lock Release Button

with the hole located on the Pole

(A). Push the Pole onto the head

until the Lock Release Button

snaps into place.

Lock Release

Button

Top

Bottom

3.

Finished Assembly

Flip fully assembled unit over.

After completing all of the previous steps,

the unit should look like this.

Repeat previous step for the

remainder of the legs.

4.

Installing Legs

To install the legs to

base pole, rotate pole

to vertical position.

Align hole (B), located

on bottom of leg, to

rectangular button on

base of pole (C). Snap

each leg onto pole.

Table of contents

Other Vornado Fan manuals

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual