Volt Stemless VPL-1053 User manual

VOLT®LOW VOLTAGE LANDSCAPE LIGHTING

V O LT ® Stemless Brass Bronze Directional Path Light

ITEM: VPL-1053

INSTALLATION INSTRUCTIONS

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

V O LT ® Stemless Brass Bronze Directional Path Light - VPL-1053

INSTALLATION INSTRUCTIONS

IMPORTANT: PLEASE READ BEFORE INSTALLATION

IMPORTANT SAFETY INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation, operation

maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located within

6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

LIGHTED LAMP IS HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

813.978.3700 • [email protected] • www.voltlighting.com

PACKAGE CONTENTS

REMOVE SHADE

813.978.3700 • [email protected] • www.voltlighting.com

PRODUCT DIMENSIONS

Parts Required (Sold Separately)

A. (1) Fixture Body

B. (1) Mounting Bracket

C. (3) Anchors

D. (3) Screws

E. (1) Coupling

A. Mounting Accessory

B. (1) G4 Bulb

2.71”

2.58”

1.96”

Remove the shade from the

xture body by removing the

screw on the bottom.

Fixture Body

Screw

Shade

INSTALL G4 BULB

INSTALL THE SHADE

V O LT ® Stemless Brass Bronze Directional Path Light - VPL-1053

INSTALLATION INSTRUCTIONS

813.978.3700 • [email protected] • www.voltlighting.com

Insert G4 bulb into the socket

properly with the correct wattage

and type marked on the xture

label.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

Socket G4 Bi-Pin Bulb

Two installation methods are available for this product

(Mounting Option A & B). Refer to respective installation

instructions and then continue to Step 4 for wire connections.

Install the shade back onto

the xture body and secure

with previously removed

screw. Hand tighten until

snug.

Fixture Body

Screw

Shade

Install Mounting Bracket

813.978.3700 • [email protected] • www.voltlighting.com

Mounting Option A: Surface Mount

1. Attach the mounting

bracket to your desired

mounting surface. Use a

pencil, mark 3 points on

the mounting surface from

3 holes on the mounting

bracket.

2. Set the mounting bracket

aside and drill 1/4” holes on

the marks on the mounting

surface.

3. Insert anchors into the

drilled holes completely.

4. Attach the mounting

bracket onto the mounting

surface and secure with

screws. Hand tighten until

snug with screwdrivers.

WALL

Mark Hole

Anchor

Mounting

Screw

Install Fixture Body to Mounting Bracket

Lay the supply cable into

the wireway slot on the

mounting bracket. Align two

screw heads on the bottom

of the xture body to the

keyholes on the mounting

bracket. Push the xture

body onto the mounting

bracket and rotate it until it

is locked into place

Go to Step 4 for wire

connections.

ROTATE

WALL

Supply Cable

Wireway Slot

Fixture Body

Screw Head

Mounting Bracket

Key Hole

Install Stake Into Soil

V O LT ® Stemless Brass Bronze Directional Path Light - VPL-1053

INSTALLATION INSTRUCTIONS

813.978.3700 • [email protected] • www.voltlighting.com

813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com

Mounting Option B: Stake Mount

Install Stake to Fixture Body

Pass supply cables through

the coupling and the stake.

Thread the coupling and

the stake to the xture body

and hand tighten until snug.

Fixture

Supply Cable

Coupling

Stake

Clear away an area in the

ground at the wireway slot.

Lay the supply cables into the

wireway slot and insert the

stake into the soil until ange

of stake is ush to ground.

Go to Step 4 for wire

connections.

Supply Cable

Ground

Stake

Soil

Fixture

813.978.3700 • [email protected] • www.voltlighting.com

WIRE CONNECTIONS

813.978.3700 • [email protected] • www.voltlighting.com

Strip both leads from the luminaire pigtail. Using two UL listed wire

connectors (sold separately), connect the leads from the luminaire to

the main supply cable leads.

Wire Connectors

Supply Cable

Pigtail

Main Supply Cable

Install/Replace Lamp

Remove the xture body from the mounting bracket or the stake

rst. Reverse Step 1 - Step 3 to expose the G4 bulb and replace it

with the correct wattage and type marked on the xture label.

Then, reinstall the shade and xture body.

IMPORTANT: G4 Bi-pin bulb must be protected from moisture

and dust at all times. Always reinstall the shade when removed.

Specications and product details subject to change without notice.

[email protected] • www.voltlighting.com

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Table of contents

Other Volt Outdoor Light manuals

Volt

Volt VSDL-6012-PBK User manual

Volt

Volt Salty Dog MR11 User manual

Volt

Volt VAL-2011-4-BBZ User manual

Volt

Volt VAL-1813-40-BBZ User manual

Volt

Volt 360 Series User manual

Volt

Volt VSPL-1045-BBZ-R1 User manual

Volt

Volt VPL-1043-4-BBK User manual

Volt

Volt BuddyPro Plus VHS-67 BRB Series User manual

Volt

Volt VPL-1017 User manual

Volt

Volt VSAL-9001-25-BBZ User manual

Volt

Volt VWL-7124-BBZ User manual

Volt

Volt VSDL-6012-PWH User manual

Volt

Volt VWL-712-BBZ User manual

Volt

Volt VPL-1049-4-BBZ User manual

Volt

Volt MR16 Lusitano VAL-2003-4-BBZ User manual

Volt

Volt VAL-2100-0-BBZ User manual

Volt

Volt VAL-2012-BBK User manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual