Vizio XVTHP200 User manual
XVTHP200 – QUICK START GUIDE
HIGH DEFINITION
HEADPHONES WITH WIRELESS DOCK FOR iPod®
ACTIVE NOISE CANCELLING
IMPORTANT SAFETY INFORMATION
Long-term exposure to loud music may cause hearing damage. Avoid extreme volume when using headphones,
especially for extended periods.
Do not use headphones while operating a motor vehicle or a bicycle. Doing so is dangerous and may violate local
laws and regulations.
Sounds that you rely on as reminders or warnings may have an unfamiliar character when using headphones. Be
aware of how these sounds may vary in character so you can recogize them as needed.
Do not drop, sit on, or allow the headphones to be immersed in water. Do not wear headphones in the rain.
Do not use headphones if the inability to hear outside sounds may present a danger to you or others.
For important information on listening guidelines, see
Information on Hearing Damage
on page 16.
Incorporated under license from SRS Labs, Inc.
SRS TruSurround HD and SRS TruVolume
are trademarks of SRS Labs, Inc.
Manufactured under license from Dolby
Laboratories. Dolby and the Double-D symbol are
trademarks of Dolby Laboratories.
iPhone®and iPod®are trademarks of Apple Inc.,
registered in the U.S. and other countries.
PACKAGE CONTENTS
Quick Start GuideHigh Definition Headphones Wireless Dock
Travel Charger for Headphones Carrying Case RCA Audio Cable
3.5mm Audio CablePower Adapter for Wireless Dock iPod Trays (3)
1
CONTROLS AND CONNECTIONS
Adjustable
Headband
(Both Sides)
Next
Charging Port
Input
Play/Pause
Previous
Volume Up
Active Noise
Reduction
SRS
Power
Volume Down
3.5mm Port
Left/Right Ear Indicator
(Both sides)
Charging Contacts
Charging Contacts: Must touch dock contacts to charge
Adjustable Headband: Extend headband to fit
Next: Go to next track on iPod/iPhone
Mini USB Port: Connect to travel charger
Input: Change audio source
Play/Pause: Play or pause audio
Previous: Go to previous track on iPod/iPhone
Volume Up: Increase volume
Active Noise Reduction: Activate to block background noise
SRS: Activate SRS sound processing when
listening to the wireless dock
Power: Press and hold for 2 seconds
to turn on or off
Volume Down: Decrease volume
3.5mm Port: Connect portable device
Headphones
2
Audio In Audio Out
SPDIF DC In
Hub/
Client
Pair
Power
iPod Dock Input
Charging Contacts
Charging Light
Charging Contacts: Must touch headphone contacts to charge
Charging Light: Turns on when headphones are charging
Input: Change audio source
iPod Dock: Connect iPod to use as audio source
Audio In: Connect analog audio device
SPDIF: Connect digital audio device
Audio Out: Connect analog receiver or powered
speakers
DC In: Connect power adapter
Hub/Client: Change Hub/Client mode
Pair: Connect dock to headphones wirelessly
Power: Press to turn on/off
Input Lights: The light corresponds to the input
currently selected
SRS Lights: When SRS TruVolume or SRS TruSurround
HD is on, the corresponding light is on
Dolby Digital Light: When playing a Dolby Digital source, the
light is on (SPDIF only)
Wireless Dock - Rear Front
Input Lights
SRS Lights
Dolby Digital
Light
3
Connect the power adapter to the DC IN port on the wireless dock.
FIRST-TIME SETUP
Connect the other end of the power adapter to an electrical outlet.
1 2
Do not connect the travel charger to the dock.
Charge the headphones by placing them on the top of the wireless
dock. Ensure the charging contacts are touching.
When the headphones are charging, the charging light is on and
the power button on the headphones is red.
Allow the headphones to fully charge.
The headphones are fully charged when the charging light is off
and the power button on the headphones is off.
3 4
4
The wireless dock and headphones are ready to use.
See
Listening to Your iPod
on page 6 or
Listening to Your Devices
on page 8.
Remove the headphones from the wireless dock. Turn on the
headphones. Press and hold the Power button for 2 seconds,
then release.
When the headphones are on, the Power button is green.
6
Ensure the HUB/CLIENT switch is in the HUB position.
Turn on the wireless dock by pressing the Power button.
The wireless dock is on when the lights on the front are on.
5
7
5
Place your iPod/iPhone in the wireless dock.
Ensure your iPod/iPhone is inserted completely.
LISTENING TO YOUR iPod
Complete
First-Time Setup
on page 4.
Locate the tray that fits your iPod/iPhone, then place it in the
wireless dock. Trays can be removed by lifting from the fingernail
slot.
2
Turn on the wireless dock by pressing the Power button.
The wireless dock is on when the front lights are on.
Remove the headphones from the wireless dock. Turn on the
headphones. Press and hold the Power button for 2 seconds,
then release.
The headphones are on when the Power button is green.
3 4
Fingernail Slot
1
6
Made for:
• iPhone 4
• iPhone 3GS
• iPod with video
(5th generation)
(60GB and 80GB only)
• iPod Nano
(6th generation)
(8GB and 16GB only)
To increase or decrease the volume, press the Volume Up or
Volume Down buttons on the headphones.
When the headphones are at maximum or minimum volume, you
will hear a tone.
8
Volume Up
Volume Down
You can also use the controls on your iPod/iPhone.
To play the next track, press the Next button on the headphones.
To play the previous track, press the Previous button on the
headphones.
7
Next
Previous
Press the INPUT button on the wireless dock or the INP button on
the headphones until the input light on the wireless dock displays
iPod.
To play or pause your music, press the Play/Pause button on the
headphones.
6
You can also use the controls on your iPod/iPhone.
5
OR
Play/Pause
7
LISTENING TO YOUR DEVICES
Complete
First-Time Setup
on page 4, then choose the best connection to the wireless dock.
Connect a SPDIF/optical or RCA audio cable from your device to the wireless dock as shown.
Remember, you can connect two devices - one device to each port.
Best Sound
Good Sound RCA Audio Cable
1
SPDIF
SPDIF/Optical Cable*
*SPDIF/Optical Cable Not Included
AUDIO OUTAUDIO IN
Turn on the wireless dock by pressing the Power button.
The wireless dock is on when the lights on the front are on.
2
Turn on the device you connected to the wireless dock.
3
SPDIF
8
Table of contents
Other Vizio Headphones manuals
