Vivitek DVR5612 User manual
1
FCC Warning
This product has undergone tests in pursuance of Part 15 of the FCC Regulations and has been found to
meet the regulations for Class B devices, which are provided for reasonable protections while keeping the
product from hazardous interference when installed and used. This product may emit radioactive energy while
in use. Failure to install and use this product in accordance with the guidelines set out in the User s Manual
may lead to hazardous interference generated by radio communications.
●Toincreasethedistancebetweenthisproductandtheradiotelecommunicationsproduct.
●Toadjustorre-orientthelocationoftheantennaoftheradiotelecommunicationsproduct.
●Toconnectthisproducttoadifferentelectricaloutletthanoneusedforaradiotelecommunicationsproduct.
●Tocontactlocaldealerfortechnicalassistance.
In order to meet the FCC requirements , please use the grounded power cord provided and shielded ferrite
corevideoadapter.Allmodicationsconductedbytheuserwithoutconsentoflocalauthoritiesshallvoidthe
operation of this product.
Accessories Check
Please make sure you have these standard accessories with your device.
●RemoteControlx1pcs
●AABatteriesx2pcs
●ThisUser’sGuidex1pcs
●PowerCordx1pcs
●WarrantyCard*1pcs
Important Statement 1
2
Maintenance
Clear methods
For the reason of safety, please make sure to unplug the power cord before start to do the cleaning.
Cleaning for the case
■Tomoptheoutsideofthecasewithsoftandcleancloth.Followtheinstructionifuse
any cloth containing certain chemical materials.
■Donotusealcoholorothermaterialinammable,whichwillresultinthedecayof
the case or paint fading.
■Donotuserobberorotherclue-relatedmaterialtointerfacewiththecase.Itpossibly
will leave scar on the case.
Cleaning for the monitor
■Pleasecleanupthedustonthesurfaceofthemonitorwithsoftclothorothersimilar
material and then clean the monitor with dry and soft cloth again.
■It’spronetogetscratchonthesurfaceofthemonitorsodonotruborknockthe
surface with hard material. Also, do not use any diluted detergent to scrape or clean
the monitor.
Maintenance for filter
Pleasedonotleavethemachinewithoutlterinstalledorthehaveadirtylterowingtolackofperiodically
cleanup.It’sbecausethelteristopreventthedustorotherobjectsfromgoingintotheinternalofthe
machine. And keep the machine in a good ventilation condition. It will result in the rise of temperature in the
machineandevencauseareordamageifthelterwithdustdoesnotbereplacedforalongperiodoftime.
Theltersaresuppliesandpleasecontacttheresellersfordetailsifyouneedtoreplacethelter.
Please contact the reseller for information about replacement or cleanup of
the filter within 1 year. The outgoing or incoming vent hole should be cleaned
periodically.
Method to replace the lter
Filter
Step3. PuttheltercoverbackandScrew
thelteronthebackofthemachine
Step1 : Loose this tow
Screwontheltercover
Step2:Takeouttheused
lterandputnewlterson
4 slots
Filter
Slot
Important Statement
1
3
Important Statement
Replacement method of projection lamp
Projectionlampsaresuppliesandhavelifespan.Pleasecontacttheresellerswhentheimageturnsdarkor
colorgetsdeteriorated.Whenthishappens,pleasereplaceitwithanewprojectionlamp.Iftheprojection
lamp could not light up and have noise, the possible reasons are:
1.Thelifespanfortheprojectionlampareendedor
2.ShuttingdowntheTVrightaftertheturn-onofpower.Atthemoment,thetemperature
ofprojectionlampistoohighanddoesnotcooldowntocertaindegree.Turniton
after a few minutes and it will work properly. or
3.Theprojectionlampdoesnotconnectcorrectlywiththelampcradle.
Replacement Procedure
Beware of the high temperature when
replace the projection lamp.
Warning:
EyedamagemayresultfromDirectlyviewingthelight
produced by the lamp used in this apparatus. Always turn
off lamp before opening this cover.
1.Loose the screw
on lamp cover
Caution:Aftertakingtheprojectionlampout,donotplaceanymetalsubstanceintothelamp
cradle.Donottouchthelampcradleorit’seasytogetburnedorcausere.
Caution:Donottouchtheglasssurfaceofthenewprojectionlampbecauseitpossiblywill
affectthequalityofresolutionanddecreasethelifespanoftheprojectionlamp.
Caution:Makesuretoscrewthescrewsrmlyinordertopreventtheshakingofthelamp,
which will result in poor connection.
Caution:Putthediscardedusedprojectionlampinthepackagingboxofthenewprojection
lamp and handle it with case and compliant to local regulation. Please do not have
kids to access the discarded lamps to prevent any danger.
Lamp
2.Thenloosethe
screw on lamp
3.Pull out the lamp directly
4.Then put the new lamp into this unit. (Follow
the reverse the way you took it out.)
1
Index
1.Important Statement 1
FCC Warning 1
Accessories Check 1
Maintenance 2
Method to replace the lter 2
Replacement method of projection lamp 3
2.Before Use 6
Correct viewing 6
Remote Control 6
Handling 7
Moisture Condensation 7
3.Safety Instructions - Warning and Caution 8
4.Connection with Antenna Cable 12
5.System Connection 13
Front Connector 13
Rear Connector 14
6.Introduction the Control Panel and Remote Control 16
7.Power ON / OFF 18
8.How to use OSD 19
Before use OSD, You must know 19
OSD explanation 20
Picture Adjust 20
PIP SETUP 23
INPUT SETUP 24
TV TUNER SETUP 24
AUDIO ADJUST 26
PARENTAL CONTROL 27
PECIAL FEATURE 28
9.Programming the universal remote control 29
To program the remote to control other devices: 29
Device program codes 29
Searching for device codes 36
Reassigning device buttons 36
Teaching the remote control new functions 37
Using the universal remote control 37
Using picture-in-picture (PIP) mode 38
Setting the sleep timer 38
Troubleshooting 39
10.Display Modes 40
Video Input Format 40
Default PC Input Mode 40
Miscellaneous 40
11.Specifications 41
12.Troubleshooting 42
13.LED Status 43
14.Service Information and Announcement 44
Service Information 44
Announcement 44
6
Correct viewing
Distance
t
h
g
i
e
h
e
h
t
s
e
m
i
T
7-
5
n
e
e
r
c
s
e
h
t
f
o
The most appropriate viewing
distance varies between 5~7 times
the height of the screen.
Viewing Angle and Height
Suitable viewing angle and height
will avoid fatigue.
Volume
As a courtesy to others, be sure
to keep the volume down
(especially in the evening).
Brightness of your viewing location
Directsunshineontothescreen,
toobrightordarkaroomlighting,darksurroundingorreectedlightmay
cause fatigue to your eyes.Be sure to keep out direct sunshine from the screen while maintaining soft lighting
in the room. Reading light is recommended.
Prolonged Viewing
ThisdeviceusesDLPTMtechnologythatwillnotashoremitradiation.However,wewouldsuggestyouto
take rest after viewing it for some time.
Remote Control
The effective range of the IR sensor of the remote control is given as follows. Be sure to keep the IR sensor
clear and avoid placing the sensor in bright light which might cause detriment to the receiving sensitivity.
Remarks on the battery of the remote controller
The service life of the battery is about 1 year (depending on your
use).Whentheoperationrangeoftheremotecontrollershortens
or its sensitivity lowers, be sure to replace both batteries inside the
remote control.
Note: Make sure to avoid replacing a new battery with an old one.
This may cause eventually damage the remote control.
Whenyouwillnotusetheremotecontrolforalongperiodoftime,
be sure to remove the batteries that could possibly leak. In the
event of leakage, be sure to wipe off the liquid on the inside of the
compartment before loading new batteries.
Before Use
2
7
Handling
Whenmovethis
unit. Please put
your hands here
Find the indicated hand positions before lighting
the device. To ensure balance and avoid accidental
damage, be sure to have at least two people carry
the product.
Be careful not to bump or scratch the product on
otherobjectswhenyouarehandingit.
Moisture Condensation
Whenthisdeviceissuddenlymovedtoawarmsitefromacoldone,orincaseofabruptchangeofthe
environmental temperature, moisture condensation may cause a foggy screen or incorrect display output. It
s because moisture congeal inside. Please wait until the moisture is evaporated, then screen will restore
normal display.
Before Use 2
8
Smoking emitting from device
In the case of smoke emitting from the product, be
sure to turn off the power switch and remove the
power plug immediately. Using the product while it is
smoking may cause
areorelectric
shock. Contact the
dealer immediately.
No image or sound
In this case, be sure to turn off the power switch
and remove the
power plug. In
case of sudden
loss of image or
sound, stop using
the device and
contact the dealer
immediately.
Dropped or broken case
In this case, be
sure to turn off
the power switch
and remove the
power plug. Please
contact the dealer
forservice.Donot
use the device as
itmaycausereor
electric shock.
Use only 110V or 220V AC outlets
Useonly110Vor220VACpoweroutlets,otherwise
reorelectricshock
may result.
Keep power plug dust free
Keep dust free of
the power cord.
Dustcancause
the insulation to
be damaged and
causeare.
Do not service, modify or disassemble this
device
This device contains
high voltage and
fragileobjectsinside
that may cause electric
shock,reordamage
of the parts. Read the
warranty booklet and
contact the dealer for
more information.
Keep foreign objects off the device
Objectsonthedevicecancausereorelectricshock
Whenthereisforeignobjectinsidethedevice,turnoff
the power supply and remove the power plug before
contacting the dealer. Be sure not to allow children
insertforeignobjects
inside the device.
Safety Instructions - Warning and Caution
3
9
Do not place flower vases, glasses,
cosmetics, chemical solutions, liquids or small
metal objects on this device
Liquidorsmallobjectsinsidethedevicemaycausere
or electric shock. In this case,
turn off the power supply and
remove the power plug before
contacting the dealer.
Keep this device from high temperature or
direct sunshine
Hightemperaturemaycause
overheatingandre.
Keep the device from contacting rubber or
plastic products for long period of time
This may cause the case to be
deformed or the paint to strip off.
Do not touch the device and power cord
while wet.
Donottouchtheelectrical
cord or remove the power
plug with wet hands which
may cause electric shock.
Do not touch the antenna or the power cord
during thunder or lightning
In case of thunder or lightning, we would suggest you
remove the power plug from the outlet and do not
touch the antenna
lead, as it may cause
electric shock.
Keep this device away from kitchen smoke,
steam, heater, dusty places and heat source
*Theseconditionsmaycausereorelectricshockto
occur.
*Boththecaseandthepowercordmaydeformormelt
with heat,
causingre
We strongly suggest you avoid plugging this
into an outlet where other electrical
appliances are being used
Pluggingthisdeviceintoapowerstriporextension
cordwhereotherhigh-voltageappliancesarealready
beingused,maycausereandoverloadtheelectrical
circuit. Make sure
if you use an
extensioncordor
power strip that
they are correctly
rated for the
proper voltage
and current of this
device.
Safety Instructions - Warning and Caution 3
Table of contents
Other Vivitek Projection TV manuals
