Vivitar WT-09 User manual
WT-09
Wi-Fi Motion PIR Sensor
Wireless Smart Sensor
User Manual
© 2009-2018 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
1
TABLE OF CONTENTS
Introduction .................................................................................................................................. 2
What’s Included............................................................................................................................ 2
How to Install the Application ....................................................................................................... 3
MOBILE DEVICE – ANDROID AND IOS SYSTEM REQUIREMENTS..................................................................................................................3
VIVITAR SMART HOME SECURITY – INSTALL AND LAUNCH .........................................................................................................................3
Connecting Your Device with the App........................................................................................... 4
INTRODUCTION.................................................................................................................................................................................4
QUICK OVERVIEW .............................................................................................................................................................................4
INITIAL SETUP...................................................................................................................................................................................5
Using Vivitar Smart Home Security ............................................................................................ 13
DASHBOARD ..................................................................................................................................................................................13
MAIN MENU..................................................................................................................................................................................16
NAVIGATION BAR ............................................................................................................................................................................32
SENSORS SCREEN ............................................................................................................................................................................33
DEVICES ........................................................................................................................................................................................36
SHARING DEVICES ...........................................................................................................................................................................38
RECONNECTING DEVICES ..................................................................................................................................................................41
HOME AND AWAY MODES ................................................................................................................................................................41
Technical Support....................................................................................................................... 42
Vivitar Warranty Card ................................................................................................................. 42
2
Introduction
Thank you for purchasing your Vivitar Smart Home Security Wi-Fi Motion PIR Sensor,
the WT-09.
Everything you need to control your Wireless Smart Wi-Fi Motion PIR Sensor is included with
your Motion PIR Sensor and the accompanying online Vivitar Smart Home Security application.
You can use the app to control what is going on inside and outside your home via any mobile
device from anywhere. In addition, you can use the Vivitar Smart Home Security app to control
your IP cameras, lighting, electrical outlets and more.
Please read this manual carefully first to get the most out of your Vivitar Smart Home Security
Wi-Fi Motion PIR Sensor.
What’s Included
•Wi-Fi Motion PIR Sensor
•Screwdriver
•Easy Guide
•Vivitar Smart Home Security Application (downloadable)
3
How to Install the Application
MOBILE DEVICE – ANDROID AND IOS SYSTEM REQUIREMENTS
•Android cellphone/tablet with OS 4.4 or higher
•iPhone/iPad with iOS 9.0 or higher
VIVITAR SMART HOME SECURITY – INSTALL AND LAUNCH
1. Make sure your mobile device is connected to a Wi-Fi Network via the Settings of your
mobile phone or tablet.
2. Use your mobile phone or tablet to search for Vivitar Smart Home Security in the Google
Play Store (for Android OS) or the Apple App Store (for iOS).
Alternatively, scan the QR codes below to find the application.
Android OS iOS
3. Install the application according to the instructions as seen on your mobile device.
4. After successfully installing Vivitar Smart Home Security, tap the icon to launch the
application.
4
Connecting Your Device with the App
IMPORTANT: Your device is supported only on a 2.4GHz Wi-Fi network. Before setup, make
sure your mobile device is connected to a 2.4GHz Wi-Fi network.
INTRODUCTION
The Vivitar Smart Home Security application allows you to easily connect and control your
lighting, indoor and outdoor IP Cameras, electric outlets, power strips and more via any mobile
device from anywhere.
With Vivitar Smart Home Security, you can see what is going on in and outside your home 24
hours a day, 7 days a week. Receive automatic alerts from your IP Cameras upon detection of
motion and sound. Set on/off schedules for each smart light bulb, power strip or outlet and more
with automatic adjustments for sunrise/sunset.
Home Mode: Set on/off schedules for devices with adjustments for Sunrise/Sunset.
Away Mode: Set devices and alerts to turn on or off while you are away from home.
QUICK OVERVIEW
ADD NEW VIVITAR
SMART HOME DEVICES
Tap the ‘Add new device’
button on the Home screen
and follow the instructions
to add your new device.
CONTROLS ALL VIVITAR SMART
HOME DEVICES
Tap the ‘Main Menu’ button to easily
navigate to all the main functions of the
app. Tap ‘Devices’ to control your smart
lights, indoor and outdoor IP cameras,
electric outlets and more.
HOME & AWAY MODES
Switch the Home & Away modes when
you leave your home and when you
come back to automatically adjust all the
devices’ security settings in your home.
5
INITIAL SETUP
NOTE:
•Your Motion PIR Sensor is supported only on a 2.4GHz Wi-Fi Network. Before setup, please
make sure your mobile device is connected to a 2.4GHz Wi-Fi Network.
•Please follow the steps below to create your User Account. You must be logged into your
User Account to register and use your Motion PIR Sensor.
INITIAL DEVICE AND APP SETUP:
1. ENABLE MOBILE DEVICE WI-FI
Make sure to enable Wi-Fi on your smartphone or tablet via the settings of your mobile
device.
2. LAUNCH MOBILE APP
If you have not already launched the app, tap the Vivitar Smart Home Security
application icon on your smartphone or tablet to launch the installed app.
3. TUTORIAL
A quick overview through the app appears.
Scroll through the pages to view the tutorial then tap Start or tap Skip to continue the initial
setup without viewing the tutorial.
NOTE: A window appears during the quick overview regarding the permission of receiving
Notifications, such as sounds, icon badges, alerts. Tap Allow to allow the “Smart Home
Security” app to send you notifications. This can be configured later via your phone
settings.
4. END USER LICENSE AGREEMENT
The End User License Agreement screen appears. Tap Agree & Continue to enter the
‘Devices’ Home screen and continue to the initial registration and adding your device.
6
5. INITIAL REGISTERATION – SENSORS ACCOUNT - GROUP 3 ACCOUNT
You must create a new Sensors Account or sign in to your existing account to use your
device. To register and add a new Motion PIR Sensor:
1) From the ‘Devices’ Home screen, tap Add New Device to enter the ‘Add new
device’ screen. The list of Vivitar Smart Home Security devices appears.
2) Tap Sensors to enter the list of Vivitar Sensors.
NOTE: Alternatively, you can scan your device’s barcode. Tap Scan Barcode button
located on the bottom of the first ‘Add new device’ screen, that lists the Smart Home
devices, and then continue to the registration.
7
3) Tap WT-09 Wi-Fi Motion PIR Sensor to select and register your device.
4) The ‘Register a new device’ screen appears.
You can create a new account or if you have already created an account, you can sign
in to your existing account.
NOTE: If you select ‘Cancel’ without signing in or creating a new account, you will not
be able to access your device via the app.
a) Create a New Account - Group 3 – Sensors:
- Tap Register to create a new Smart Home Security account.
- You will be prompted to enter your email and a password for this account.
8
- Tap Create Account.
- A ‘Registration complete’ window appears showing that your account has been
created successfully. Tap OK to continue.
b) Sign in to Existing Account - Group 3 – Sensors:
- To sign in to your existing Smart Home Security account, tap Sign In from the
‘Register a new device’ screen.
- Enter your email, your account password and then tap Sign In.
NOTE: If you have forgotten your password, tap ‘Forgot password?’.
9
6. ADD NEW DEVICE: CONNECT TO APP
The ‘Add new device’ connect instruction screen then appears.
PREPARE YOUR DEVICE
- Loosen the screws on the battery cover by using the supplied screwdriver to open the
battery compartment.
- Insert 2 new AAA batteries. Make sure the batteries are placed correctly as per the
polarity symbols shown inside the batter compartment.
- Do not close the battery compartment. Check that the blue LED indicator light is blinking.
- When you see the Wi-Fi indicator light flashing, tap Continue.
If the Wi-Fi indicator light is not flashing, then reset your device as follows:
- Take out the batteries and put them back again.
- The light indicator should start flashing, representing that the device is ready to pair.
- Make sure that you are connected to the Wi-Fi network to which you want to connect the
new device.
- Then, tap the Continue button.
Table of contents
