Vista VK2-4KXDECODER User manual
VK2-4KXDECODER
Quick start guide
Before You Begin
Read these instructions before installing or operating this product.
Note: This installation should be made by a qualified service person and should conform to local
codes.
This manual provides installation and operation information. To use this document, you must have
the following minimum qualifications:
A basic knowledge of CCTV systems and components
A basic knowledge of electrical wiring and low-voltage electrical connections
Intended use
Only use this product for its designated purpose; refer to the product specification and user
documentation.
Customer Support
For assistance in installing, operating, maintaining and troubleshooting this product refer to this
document and any other documentation provided. If you still have questions, please contact
Norbain Technical Support and Sales:
Norbain SD, Inspired, Easthampstead Road, Bracknell RG12 1YQ.
UK +44 (0) 118 912 5000
Note: You should be at the equipment and ready with details before calling Technical Support.
Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING, CAUTION and
Note statements identify potential hazards that can occur if the equipment is not handled properly:
* WARNING:
Improper use of this equipment can cause severe bodily injury or equipment damage.
** Caution:
Improper use of this equipment can cause equipment damage.
Note: Notes contain important information about a product or procedure.
This apparatus is manufactured to comply with the radio interference.
A Declaration of Conformity in accordance with the following EU standards has been
made. The manufacturer declares that the product supplied with this document is
compliant the provisions of the EMC Directive 2004/108/EC, the CE Marking Directive
93/68 EEC and all associated amendments.
All lead-free products offered by the company comply with the requirements of the
European law on the Restriction of Hazardous Substances (RoHS) directive:
2011/65/EU, which means our manufacture processes and products are strictly “lead-
free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the
product must be collected separately at the product end-of-life. This applies to your
product and any peripherals marked with this symbol. Do not dispose of these products
as unsorted municipal waste.
* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.
NORBAIN SD reserves the right to make changes to the product and specification of the product from
time to time without prior notice.
WARNINGS AND CAUTIONS:
To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation
grills or other openings on the equipment.
IMPORTANT SAFEGUARDS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that product heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of
time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
15. IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only.
CE COMPLIANCE STATEMENT
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
VK2-4KENCODER Quick Start guide V2.0
1
Table of Contents
Table of Contents ......................................................................................................................................1
1. Overview..................................................................................................................................................2
1.1 Package Contents .........................................................................................................................3
1.2 Decoder Description ......................................................................................................................3
2. Installation ...............................................................................................................................................5
2.1 Starting System ............................................................................................................................5
2.2 Quick Setup..................................................................................................................................6
2.2.1 Account ...............................................................................................................................6
2.2.2 System.................................................................................................................................7
2.2.3 Network ...............................................................................................................................8
2.2.4 Time/Date............................................................................................................................8
2.2.5 Easy Installation Wizard.........................................................................................................9
3. Live Screen Configuration ........................................................................................................................ 10
3.1 Icons in Live screen..................................................................................................................... 11
3.2 Quick menu................................................................................................................................ 12
3.2.1 Channel Assign ................................................................................................................... 13
4. Setup menu............................................................................................................................................ 14
5. Web Setup.............................................................................................................................................. 15
5.1 Log In........................................................................................................................................15
5.2 General buttons in Setup menu ....................................................................................................16
VK2-4KENCODER Quick Start guide V2.0
2
1. Overview
This chapter describes device overview, components and their terms and features.
This product is a device that displays images transmitted from an IP camera on and HDMI monitor.
The device features include the following:
▪Convenient UI from user’s viewpoint
▪16 IP camera display
▪Providing H.264, H.265 compression
▪Support dashboard display
▪4K resolution support
▪Remote control through a network or local monitor
VK2-4KENCODER Quick Start guide V2.0
3
1.1 Package Contents
The device package contents consist of the following:
Note
Please check all components involved.
Table 1-1 Package contents
No
Name
No
Name
1
Decoder
2
Mounting Bracket
3
DC 12V Adaptor
4
Bracket fixing screw
5
Quick guide
6
Program CD
1.2 Decoder Description
Each part is listed in the below:
Figure 1-1 Name and Connection of each front section
Table 1-2 Name and Function of each front section
No.
Name
Function
1
USB port
USB port is connected for USB mouse or firmware upgrade.
2
Micro SD
Storage of media files.
3
LAN LED
Pointing out network in connection.
4
Power status LED
Pointing out device on/off.
5
USB port
USB port is connected for USB mouse or firmware upgrade, and data
back-up.
VK2-4KENCODER Quick Start guide V2.0
4
Figure 1-2 Name and Connection of rear section
Table 1-3 Name and Function of rear section
No.
Name
Function
1
NETWORK
Network connector for IP Camera and CMS.
2
AUDIO OUT
Audio output port.
3
CVBS
CVBS(Spot Video) output port.
4
HDMI
HDMI output port.
5
ALARM OUT
Alarm output connector.
6
DC12V
Power supply connector.
VK2-4KENCODER Quick Start guide V2.0
5
2. Installation
You can fix the product on the wall using the supplied bracket.
Refer to the drawing below for the hole position of the bracket.
Figure 2-1 Dimension
2.1 Starting System
Power supply begins with system operation as follows:
1 Switching on initialize with below icons in order.
2 With buzzer sounds, the start screen is presented.
3 In Log in screen, enter the ID, Password and press OK.
Note
Default ID & Password is admin/admin.
Attention
Please change password after login due to security.
Other manuals for VK2-4KXDECODER
1
Table of contents
Other Vista Media Converter manuals
