Viper GV25 User manual
User Manual
Original instructions
GV25
GV35
GV702
Company information:
www.vipercleaning.eu
GV12066 (1) – 2012-04-10
GV12066 (1) – 2012-04-10 GV 25 / GV 35 / GV 702 3
USER MANUAL ENGLISH
TABLE OF CONTENTS
INTRODUCTION.............................................................................................................................................................. 4
MANUAL PURPOSE AND CONTENTS .......................................................................................................................................... 4
TARGET........................................................................................................................................................................................... 4
HOW TO KEEP THIS MANUAL....................................................................................................................................................... 4
DECLARATION OF CONFORMITY ................................................................................................................................................ 4
IDENTIFICATION DATA................................................................................................................................................................... 4
OTHER REFERENCE MANUALS................................................................................................................................................... 4
SPARE PARTS AND MAINTENANCE............................................................................................................................................. 4
CHANGES AND IMPROVEMENTS ................................................................................................................................................ 4
PURPOSE AND INTENDED USE ................................................................................................................................................... 4
CONVENTIONS .............................................................................................................................................................................. 5
UNPACKING/DELIVERY ................................................................................................................................................. 5
SAFETY ........................................................................................................................................................................... 5
SYMBOLS USED TO MARK INSTRUCTIONS ............................................................................................................................... 5
GENERAL INSTRUCTIONS............................................................................................................................................................ 5
MACHINE DESCRIPTION ............................................................................................................................................... 8
MACHINE STRUCTURE GV 25 / GV 35......................................................................................................................................... 8
MACHINE STRUCTURE GV 702.................................................................................................................................................... 8
TECHNICAL DATA........................................................................................................................................................................... 9
WIRING DIAGRAM FOR GV25-EU GV35-EU .............................................................................................................................. 10
WIRING DIAGRAM FOR GV702-EU............................................................................................................................................. 10
OPERATION .................................................................................................................................................................. 10
BASIC OPERATION ...................................................................................................................................................... 10
MAINTENANCE............................................................................................................................................................. 12
STORAGE...................................................................................................................................................................... 12
RECYCLING THE CLEANER........................................................................................................................................ 12
4 GV 25 / GV 35 / GV 702 GV12066 (1) – 2012-04-10
ENGLISH USER MANUAL
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and au-
tonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal. Before
performing any procedure on the machine, the operators and qualified technicians must read this manual carefully. Contact Viper in
case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Viper will not be answerable for damages coming from
the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.
The CE-declaration is printed in the Quick Start Guide.
IDENTIFICATION DATA
The machine model and serial number are marked on the plate.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
OTHER REFERENCE MANUALS
−Service Manual (can be consulted at Viper Service Centers)
−Spare Parts List (see www.vipercleaning.eu)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed out by qualified personnel or by Viper Service
Centers. Only original spare parts and accessories must be used. Contact Viper for service or to order spare parts and accessories,
specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Viper constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by Viper.
PURPOSE AND INTENDED USE
The appliance is suitable for picking up dry, non-ammable dust and liquids.
This appliance is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and rental businesses.
Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk
for such use is borne solely by the user.
Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.
GV12066 (1) – 2012-04-10 GV 25 / GV 35 / GV 702 5
USER MANUAL ENGLISH
CONVENTIONS
Forward, backward, front, rear, left or right and up are intended with reference to the operator’s position, that is to say in working
position with the handle.
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary precau-
tions to safeguard people and property.
The operator’s cooperation is essential in order to prevent injury. No accident prevention program is effective without the total coop-
eration of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working or moving
around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is the best
guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS USED TO MARK INSTRUCTIONS
DANGER!
Danger that leads directly to serious or irreversible injuries, or even death.
WARNING!
Danger that can lead to serious injuries or even death.
CAUTION!
Danger that can lead to minor injuries and damage.
NOTE
Indicates a remark related to important or useful functions.
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential damages to people and machine are shown below.
The appliance must
−only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating
it
−only be operated under supervision
−not be used by children
Do not use any unsafe work techniques.
Never use the vacuum cleaner without a filter.
Switch off the appliance and disconnect the mains plug in the following situations:
−Prior to cleaning and servicing
−Prior to replacing components
−Prior to changing over the appliance
Use of the cleaner is subject to current national regulations. Besides the operating instructions and binding accident prevention regu-
lations valid in the country of use, observe recognized regulations for safe and proper work.
TRANSPORT
Before transporting the dirt tank, close all the locks.
Do not tilt the cleaner if there is liquid in the dirt tank.
Do not use a crane hook to lift the cleaner.
OPERATION
Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
The machine working temperature must be between 0°C and +40°C.
The humidity must be between 30% and 95%.
6 GV 25 / GV 35 / GV 702 GV12066 (1) – 2012-04-10
ENGLISH USER MANUAL
Do not use the machine as a means of transport.
In case of fire, use a powder fire extinguisher, not a water one.
Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the openings
free from dust, hairs and any other foreign material which could reduce the air ow.
Do not remove or modify the plates affixed to the machine.
If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is less than 2.5 m/s2
(98/37/EEC-EN 1033/1995).
This machine must not be used on roads or public streets.
MAINTENANCE
To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this manual, must be
performed by the authorised personnel or by Viper Service Center.
Carefully read all the instructions before performing any maintenance/repair procedure.
Do not wash the machine with direct or pressurised water jets, or with corrosive substances.
EXTENSION LEAD
As an extension lead, only use the version specified by the manufacturer or one of a higher quality.
When using an extension lead, check the minimum cross-sections of the cable:
Cable length Cross section
< 16 A < 25 A
up to 20 m 1.5 mm22.5 mm2
20 to 50 m 2.5 mm24.0 mm2
GUARANTEE
Our general conditions of business are applicable with regard to the guarantee.
Unauthorised modifications to the appliance, the use of incorrect brushes and detergents in addition to using the appliance in a way
other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.
TESTS AND APPROVALS
Electrical tests must be performed in accordance with the provisions of safety regulations (BGV A3) and to DIN VDE 0701 Part 1 and Part 3.
In accordance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications.
ELECTRICAL COMPONENTS
DANGER
Electric shock due to faulty mains connecting lead.
Touching a faulty mains connecting lead can result in serious or even fatal injuries.
Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it).
Regularly check whether the power cord is damaged or shows signs of ageing.
Have the faulty mains connecting lead replaced by your Viper service representative or a qualified electrician prior
to using the appliance again.
DANGER
The upper section of the vacuum cleaner contains live components.
Contact with live components leads to serious or even fatal injuries.
Never spray water on to the upper section of the vacuum cleaner.
CAUTION
Electrical components.
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of being connected to an unsuitable mains voltage.
Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply.
CAUTION
Electrical connection.
Connect the appliance via a residual current circuit breaker.
Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection
class is maintained.
Connectors and couplings of power supply cords and extension leads must be watertight.
GV12066 (1) – 2012-04-10 GV 25 / GV 35 / GV 702 7
USER MANUAL ENGLISH
PICKING UP LIQUIDS
CAUTION
Do not pick up ammable liquids.
Before liquids are picked up, always check that the water level limit works properly.
If foam appears, stop work immediately and empty the tank.
MATERIALS HAZARDOUS TO HEALTH
WARNING
Hazardous materials.
Vacuuming up hazardous materials can lead to serious or even fatal injuries
The following materials must not be picked up by the vacuum cleaner:
−hazardous dust
−hot materials (burning cigarettes, hot ash, etc.)
− ammable, explosive, aggressive liquids (e.g. petrol, solvents, acids, alkalis, etc.)
− ammable, explosive dust (e.g. magnesium or aluminium dust, etc.)
EMPTYING DIRT TANK
CAUTION
Picking up environmentally hazardous materials.
Materials picked up can present a hazard to the environment.
Dispose of the dirt in accordance with legal regulations.
RISK OF EXPLOSION
WARNING
Flammable and explosive materials.
Risk of explosion in explosive atmosphere or areas where ammable and explosive materials are stored.
Do not operate the machine near dangerous, ammable and/or explosive powders, liquids or vapours.
SPARE PARTS AND ACCESSORIES
CAUTION
Non-genuine components and unsuitable detergents.
The use of non-genuine parts and unsuitable detergents can impair the safety of the appliance and lead to damage.
Only use spare parts and accessories from Viper.
Only use the accessories and detergents supplied with the appliance or those specified in the operating instructions.
8 GV 25 / GV 35 / GV 702 GV12066 (1) – 2012-04-10
ENGLISH USER MANUAL
MACHINE DESCRIPTION
MACHINE STRUCTURE GV 25 / GV 35
(1) Handle
(2) Cover
(3) Mains cord
(4) Catch
(5) Dirt tank
(6) Caster
(7) Mounting base
(8) Intake
(9) On/off switch
MACHINE STRUCTURE GV 702
(1) Carring handle
(2) On/off switch
(3) Top cover
(4) Dirt tank
(5) Intake
(6) Outlet
(7) Handle lift
(8) Mounting base
(9) Castor
(10) Wheel
(11) Support
(12) Clamp
(13) Catch
(14) Handle
(15) Mains cord
(16) Head cover
GV12066 (1) – 2012-04-10 GV 25 / GV 35 / GV 702 9
USER MANUAL ENGLISH
STANDARD ACCESSORY SET (GV25-EU GV35-EU)
(1) Wet pick-up tool (300mm)
(2) Crevice tool
(3) Combination tool
(4) Tube
(5) Hose
(6) Upholstery tool
(7) Dusting tool
STANDARD ACCESSORY SET (GV702-EU)
(1) Combination tool
(2) Upholstery tool
(3) Dusting tool
(4) Crevice tool
(5) Tube
(6) Paper bag
(7) Filter basket with cloth filter
(8) Hose
(9) Filter
TECHNICAL DATA
Model GV25-EU GV35-EU GV702-EU
Voltage V 220-240 220-240 220-240
Power W 1100 1100 2200
Current A 5 5 10
Frequency Hz 50-60 50-60 50-60
Dirt tank volume L 25 35 70
Vacuum mm 2032 2032 2032
Flow rate l/min 3398 3398 6796
Sound pressure level at workstation dB(A) 65 65 65
Weight kg 12 13 26.3
Length of Power cord m 10 10 10
10 GV 25 / GV 35 / GV 702 GV12066 (1) – 2012-04-10
ENGLISH USER MANUAL
WIRING DIAGRAM FOR GV25-EU GV35-EU
WIRING DIAGRAM FOR GV702-EU
OPERATION
BASIC OPERATION
Check that the vacuum cleaner is switched off.
Check that there is a cloth filter inserted in the dirt tank.
Connect the suction hose: Push the hose (2) into the suction inlet (1) until it is sliding in place. To release the hose from machine
just twist and pull out the hose.
Connect the tubes (1) with the hose handle (2), twist the tubes in order to ensure that they are properly fitted.
Attach a suitable nozzle (3) to the tube. Choose the nozzle depending on the type of material that is to be picked-up.
Insert the power cord into a properly installed and fused socket with earthing contact.
Put the on/off switch (4) into position ”I” in order to start the motor. (GV702 has two motors/fan units and two on/off switches – one
switch for each motor).
Other manuals for GV25
1
This manual suits for next models
2
Table of contents
Other Viper Vacuum Cleaner manuals
Viper
Viper BARRACUDA User manual
Viper
Viper Shovelnose User manual
Viper
Viper LSU135 User manual
Viper
Viper LSU135 User manual
Viper
Viper CAR275 User manual
Viper
Viper MAMBA MB53CV User manual
Viper
Viper GV35 User manual
Viper
Viper GTR1500-EU User manual
Viper
Viper CAR275 User manual
Viper
Viper GV25 User manual
