Viking VK3610 User manual
ʹÓÃ˵Ã÷Êé
ʹÓÃ˵Ã÷Êé
USER MANUAL
ʹÓÃ˵Ã÷Êé
ʹÓÃ˵Ã÷Êé
ʹÓÃ˵Ã÷Êé
WASHWASH
*** Due to our product updating, we will not do a future notice if the
user manual has any changes. Sorry for any inconvenient caused! ***
LED MOVING HEAD LIGHT
R/G/B/W (4in1)*36 LED
Note: After using the fixture for a long time, it will have dirty phenomenon.
It will affect to use the fixture and the brightness of the light, so we suggest you
to maintain and clean the lights regularly.
1. Advantage of maintain the light:
1) Good maintain will make sure the brightness of the light;
2) Good maintainwill make thelights using fora longer time;
3) Good measureto make sure the function ofthe light stable;
4) Good maintainwill make you free from worry, save moneyand save effort.
2. The way on how to maintain the fixture:
1) Note: Electronic component in the light such as: circuit main board, power-
supply, led cannot wash clean or use the tool with fluid substance to clean;
2) Please clean the fixture on a fixed time which can be depends on your
environment and the frequency you use the light, usually at least 4-6 months you
need to cleanone time;
3) Please disconnectthe power before you clean thefixture;
4) Please cleanthe fixture just when the fixturein a stable mode;
5) Please take off the cover to clean the lens and fan;
6) It isbetter to use soft cloth, smallbrush, and blower gun to cleanthe fixture;
7) LED moving head is a modern energy conservation and environmental
protection product; please make sure the voltage you use is stable on the rated
voltage;
8) LED moving head is frontier hi-tech energy conservation and environmental;
protection lighting product, please make sure the voltage you used is around the
rated voltage.
1.This fixture is tested by our factory and the quality will be good and also good
packed before shipping.Any damages caused bythe disregard of this user manual
are not subject to warranty. The dealer with not accept liability for any resulting
defects or problems.
2. Due to our product updating, we will not do a future notice if the user manual
has any changes.
12 Statement
11 Maintain and clean
9
10 Spectrum CRT
CH14 X/Y set the
CH13 Reset/auto mode
3
2
1
0
1
2
3
12345678910
3200 1900 950 630 260
Green
Distance(m)
Beam opening(m)
LUX
25
3
2
1
0
1
2
3
12345678910
1500 650 420 260 120
Red
Distance(m)
Beam opening(m)
LUX
25
8
3
2
1
0
1
2
3
12345678910
3550 2100 1260 620 270
Blue
Distance(m)
Beam opening(m)
LUX
25
3
2
1
0
1
2
3
12345678910
1530 1800 980 430 240
White
Distance(m)
Beam opening(m)
LUX
25
241-255
no action
191-240
sound active mode
176-190
no action
126-175
auto mode
111-125
no action
96-110
reset(prepare time
3 seconds)
81-95
no action
16-80
h orizontal/vertical
closed light running
0-15
no action
192-255
Y axis reverse
d irection
128-191
X/Y axis reverse
direction at the
same time
64-127
X axis forward
d irection
0-63
X/Y axis forward
direction at the
same time
2 Rotation angle
1 Checking fixture and components
0-280
Pan:0-540 or 0-630 Tilt:0-280
Be careful with your operations, with a da-
ngerous voltage you can suffer a dangerous
electric shock when touching wires.
3 Technical specifications
Thank you for choosing our led moving head light. If follow the introductio-
ns given inthis manual, we are sure youwill enjoy the device for along pe-
riod of time.Unpack your led moving head light, check carefully the content
of the boxand contact immediately your forwarder incase of damage.
The following items are included in the box:
3m/ 3-pin DMX cable: 1pc
User manual: 1pc
Led moving head light: 1pc
0-540 /0-630
Damages caused by the disregard of this user manual are
not subject to warranty. The dealer with not accept liab-
ility for any resulting defects or problems.
1
1 Voltage 100V-240V AC 50/60HZ.
2 Power consumption 360W
320W
3 Light source R24+G28+B28+W28*3W LED
R/G/B/W(4in1)36*8W LED
4 Light Included angle 15-60 Electronic adjustable beam
5 DMX channel 12CH/15CHChannel options
6 X axis 540deg and 630deg for option, it has auto closed-loop system
100
255
00
100
255
00
100
255
00
128-255
Beam-
automatic scaling
From big to small
By slow quickly
0-127
Adjusting-
the beam angle
From big to small
Linear regulator
CH15 Focus
The person who install and operate this fixture should have relevant
technical qualifications.Pls read and follow this manual carefully before
you install and operate the fixture. Damages and loss caused by the
disregard of this user manual are not subject to warranty. The dealer with
not accept liability for any resulting defects or problems.
1. This fixture is indoor energy-saving and environment-protecting product.
Please keep frommoisture and dust.
2. please donot take apart the cover orchange equipment personally.
3. When open the box, please take out the foam which used for shipping.4.
This fixture is with good quality and good packed before we ship out. Please
do not takeapart the cover or change equipmentpersonally.
4. Please install the fixture in proper place to make sure use it safely and not
shake the fixtureto make sure get good effect. Please payattention to shock
it. Please avoid violent collision when installing.
5. Please do not connect the power cable to other cable, especially high-
voltage fence.
6. The power, voltage that you used should be consistent with the label
showed on light. Please make sure effective voltage is not higher or lower
than the light required.
7. Please makesure the power cable is connectingwell.
8. Please checkthe fixture and accessories in aregular time.
9. Please disconnectthe light if you do notuse it or when you cleanit.
10. The protection level of this fixture is 1 level. Please connect
yellow/green color cable to the ground.
11. Please make sure the power you use suit for the fixture before using, and
the light isnot external power, please donot connect the fixture into external
dimmer device.
4 Installation and operation
7 Y axis 280deg, it has auto closed-loop system;
8 Horizontal, Vertical independent linear speed adjustable;
9 Fine tunning: X/Y axis 16bit accurate positioning can set X/Y forward and
reverse on the controller;
10 Dimmer: 10-100% linear dimmer;
11 Strobe: 1-10times/S (it has common strobe, thunder strobe, Radom strobe,
sudden dark and lightstrobe, sudden light and dark strobe) linear adjustable;
12 RGB256*256*256color mixing;
13 Control mode:DMX512 signal,Master/Slave,Work Auto And Sound active
The Controlling mode is preference to DMX 512 Signal;
14 light closing&position fixing function;
15 can edit X/Yforward and reverse direction for single light or group light
on the controller;
16 Size of fixture 360mm*220mm*430mm;
17 Size of package 410mm*330mm*450mm;
18 N. W 9KG.
2
CH10 Blue color
CH9 Green color
100
255
00
100
255
00
Green color from dark to light, linear adjustable
Blue color from dark to light, linear adjustable
CH12 R/G/B/W macro function
100
255
000-4 inaction
50-94 nine colors cycle jumping,
from slow to fast
95-99 nine colors cycle grudual chaning,
from slow to fast
100-149 White color all light,
red color from dark to light
150-154 White color all light,
green color from dark to light
155-166 White color all light,
blue color from dark to light
167-178 Red color all light,
blue color from dark to light
179-190 Green color all light,
blue color from dark to light
191-202 Green color all light,
blue color from light to dark
203-214 Blue color all light,
red color from dark to light
215-226 Blue color all light,
red color from light to d ark
227-238 Red color all light+green color+blue
color from dark to light
239-250 Blue color all light+red color from dark to
light, green color from light to dark
251-255 R/G/B/W 100% output at the same time
7
CH11 White color
100
255
00
White color from dark to light, linear adjustable
1 lug hook and chassis
2 hook
3 safey rope
4 Fast lock installed in the hole
5 finish hook installing
4
1
3
2
5 Fixture connection
6 Hook installation
A.DMX512
control connecing sketch map
B.Work Auto or
Master/Slave
control connecting
stetch manp
Setup address Light QTY *14+1: 001 015 029
3
3оºÍ5о¿ØÖÆÏß²åÍ·£¨¹«¡¢Ä¸£©µÄת»»
Connection of Signal cables(3chips and 5Chips)
Parameterof DMX Signal In/Out
12. Please do not shot the eyes directly in a close range. Please do not let the
unqualified people near to the fixture when the light is working (Such as child,
epilepsy patients)
13.Please install thelight more than 3 meters from inflammable place
14. Please putthe light in the room with good ventilation
15. The max temperature forthis fixture is25-40 centigrade
Master Slave Slave Slave
CH6: RGB strobe
CH5: X/Y speed
CH8: RED colorCH7:R/G/B/W general dimmer
100
255
00
100
255
00
Red color from dark to light, linear adjustable
100
255
00
100
255
00
7-65 common strobe from
slow to fast
66-69 no action
70-128 impluse thunder strobe,
from slow to fast
129-132 no action
0-6 no action
196-255 gradual dark strobe,
from slow to fast
133-191 gradual light strobe,
from slow to fast
192-195 no action
X/Y scanning speed adjustable, from slow to fast R/G/B/W dimmer from dark to light, linear adjustable
6
DMX addr Enter-up/down
address setting
Vdlue 001-512
Press menu back to last main menu
Enter
confirmation
Pan invert Enter-up/down
PAN Setup YES Or NO Press menu back to last main menu
Enter
confirmation
Pan angle Enter-up/down
pan setting 540 Or 630 Press menu back to last main menu
Enter
confirmation
Tilt invert Enter-up/down
Vertical Setup YES Or NO Press menu back to last main menu
Enter
confirmation
Mode Enter-up/down
mode setting Press menu back to last main menu
Enter
DMX512 DMX mode
Press menu back to last main menu
Enter
Sound Sound mode
Press menu back to last main menu
Enter
Autometism
Auto mode
Data:xxx Press menu back to last main menu
Enter
Manual mode
Restore Enter-up/down
Device reset Motor Enter
All motors reset
Factory Enter
revert to default settings
Manua Enter-up/down
channel setting CH XX
Enter
up/down to choose channel
LCD
Dmx Mode Enter-up/down
Channel mode 15CH Mode Enter
15 Channel mode
Enter
12 Channel mode
Press menu back to last main menu
Enter
Servitor Slave mode
12CH Mode
X axis scanning(0-540/630)
Y axisscanning(0-280)
X axis finescanning 16 bit
Y axisfine scanning 16 bit
X/Y axisscanning speed
RGBW strobe
RGBW dimmer
Red color
Green color
Blue color
White color
RGBW color setting
Closed light running+reset+automode
X/Y axisforward and reverse
X axis scanning(0-540/630)
Y axisscanning(0-280)
X/Y axisscanning speed
RGBW strobe
RGBW dimmer
Red color
Green color
Blue color
White color
RGBW color setting
Closed light running+reset+automode
7 DMX channel description
4
CH2:TILT scanningCH1:PAN scanning
CH4: TILT fine tunningCH3:PAN fine tunning
9 DMX channel content
100
255
00
100
255
00
100
255
00
100
255
00
PAN scanning 540deg/630deg TILT scanning 280deg
PAN fine tunning 16bit TILT fine tunning 16bit
5
Table of contents
Other Viking Lighting Equipment manuals
Viking
Viking SL-1 Instructions for use
Viking
Viking "T" SERIES Technical manual
Viking
Viking SL-1 Instructions for use
Viking
Viking BLK-1A Instructions for use
Viking
Viking WARRIOR VK132-2R User manual
Viking
Viking VK280 User manual
Viking
Viking VK1812 User manual
Viking
Viking VK PB7 PIXELBLADE 7 User manual
Viking
Viking VK1815 User manual
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
