VICUT VR320 User manual

VR320 Digital Label Die-Cutter

User Manual

Please read this manual before you use this equipment be carefully.

ANHUI William(VICUT) CNC Technology Co., LTD

Version: revised 2020/12

are the confidential and proprietary property of VICUT. and their suppliers. As

such, this document, attached files, and information contained herein are

subject to all nondisclosure and proprietary information agreements currently

in effect with your organization. Copies of this document, any portion of this

document, or attachments may not be transmitted or disclosed to any third

party without the prior written permission of VICUT.

(“VICUT” “we,” or “us”) and is protected under Chinese and Foreign copyright,

trademark and other intellectual property laws.

INDEX

Chapter 1 Safety Matter………………………………………………………………………………....….............…1

1-1 Safety matter needing attention……………………………………………………..............1

1-2 Caution labels…………………………………………………………………..…….................….3

1-3 Safety attention instruction…………………………………………………..........…......…..4

Chapter 2 Handling and installation………………………………………………………..........…….........…5

2-1 Crate Handing……………………………………………………………...…………...............…5

2-2 Crate Disassemble……………………………………………………………………....…...........5

2-3 Storage requirements………………………………………………………………….........…....6

2-4 Machine Handling…………………………………………………………............…............6

2-5 Space requirements…………………………………………………………......…......…...…..6

2-6 Electric and pneumatic……………………………………………….............……....…..…6

2-7 Installation procedure ………………….……………………………………………..….........…6

2-8 Dismantling…………………………………………………………………….......…....…..........8

Chapter 3 System Introduction…………………………………………………………….............…...….......9

3-1 Functions introduction…………………………………………………….......………...….......9

3-2 Packing list………………………………………………………….....…...................…..…..10

3-3 Specification…………………………..............……………………………………....…......…11

3-4 Parts Name…………………………………………………………..…………………..................12

Chapter 4 Preparation Work…………………………………………......…………………………...............…14

4-1 Media loading………………………………………………………………….........................14

4-2 Sensor setup……………………………………………………………………..….........….........15

4-3 Lamination……………………………………………………………………......…...............….20

4-4 Cutting holder setup………………………………………………………… ..................….21

4-5 Matrix Removal setup………………………………………………………….....…............…24

4-6 Slitting unit setup……………………………………………………………………................…26

4-7 Separate rewinder……………………………………………………………....................….27

4-8 Vacuum system…………………………………………………………………..…................….27

Chapter 5 System Operating Instruction ……………………………………………………………….........……28

5-1 Operation instruction of control panel………………………………………................….28

Panel button instruction………………………………………................................….29

5-2 Getting started……………………………………………………………...…………………..............30

1. Basic setting……………………………………………………………............................………31

2. Job data sending…………………………………………………………………………….................32

3. Start cutting……………………………………………………………………........………..............32

4. Status Monitoring………………………………………………....................................…33

5-3 Functional parameter in setting menu……………………………….........................33

5-4 Tension control………………………………………………………..............……………........…42

5-5 Tools Select ………………………………………………………………………………….................43

5-6 Slitting mode………………………………………………………………........……….......…....….46

5-7 Multi. Cut (Long label cut)…………………………………………………………......……....…..46

Chapter 6 VOREY cutter software………………………………………………………..................…....…..48

6-1 USB Drive installation and setup…………………………………………........…………....….48

Transfer mode – UART…………………………………………………….......................… 48

Transfer mode - Network…………………………………………………....................……50

Transfer mode – USB………………………………………………................................50

6-2 File design……………………………………………………………………...........................…51

6-3 PLT format file generation………………………………………………................………...54

6-4 Cutter software…………………………………………………...................................…55

6-5 File open and software……………………………………………………………..................…58

6-6 Trajectory optimization……………………………………………………......................…..65

Chapter 7 Equipment maintenance …………………………………………………….........……........………68

Notice for warranty……………………………………………………………………….....…………................….71

ANHUI WILLIAM CNC TECHNOLOGY

Chapter 1 Safety Matter

1-1 Safety matter needing attention

1. The operator should obey the following 4 basic safety operation principles

(1) The machine should be operated or maintained only by trained technician.

(2) Read the user manual in detail and understand its contents.

(3) For check convenience, put the user manual near the machine.

(4) The people including operator and maintenance technician should know location of E-

stop device and realize its function and operation methods.

2. Safety precaution before or after turning on the machine

Firstly confirm that whether all switches are OFF, and machine has been correctly

ground.

AC electric power source

The electric power source used on this machine is 1, 3 wires, 110V-220V~. Rated current of

the main power switching device 20A. Such switching device should be in compliance with its

safety relevant standards.

3. Safety precaution during handling and installation

To increase the machine working efficiency, the installation environment should be well

ventilated with good air quality. The surrounding temperature should be lower than 40C,

and prevention of rain and direct sunlight is required.

Safety precautions during handling and installation are as follows：

(1) Make sure that the foundation is strong enough to support the machine.

(2) Lifting operation is only allowed one person.

(3) When lifting the machine, nobody is allowed to be under or near the machine.

(4) Helmet is required during handling, installation or cleaning.

(5) If it’s necessary to climb on the machine, please use safe and secure ladder or

platform.

(6) Adopt proper device for heavy parts lifting.

(7) Confirm that whether the lifting wire rope is strong enough to lift the machine or

components.

(8) Please turn off the power before handling or installation. If power is required, let

others know the location of E-stop device in advance.

(9) Please wear leather gloves or other similar protective equipment during handling.

ANHUI WILLIAM CNC TECHNOLOGY

4. Safety precaution during operation

The operator should be familiar with machine’s function characteristics and operation

methods. Don’t let other people approach the machine. During running, stretch hands into

work area is prohibited. If there is any abnormal situation happened, turn off the power

immediately. After that, try to find the solutions.

Safety precautions during operation are as follows：

(1) Don’t remove any safety guarding or devices.

(2) Don’t remove or change location of any interlocking mechanism.

(3) Prevent wet hands to touch switches.

(4) Don’t put any part of human body on or near the machine’s moving parts.

(5) Keep your hair away from moving parts.

(6) Don’t wear bangle, watch, jewelry or loose clothes.

(7) Except material loading/unloading, it’s not necessary to wear gloves.

(8) Generally an operator is required for this machine. If more than one operator is

required, there should be good communication between operators.

5. Safety precaution during maintenance

Please turn off the power before maintenance.

Safety precautions during maintenance are as follows:

(1) Turn off the main power before inspection or maintenance.

(2) Maintenance or inspection should be carried out by authorized technician.

(3) It’s prohibited to climb the machine.

(4) Please use the recommended lubricant or grease.