Vicon part number 8009-8244-00-00 Rev 0112
Page 4
© 2011 Vicon Industries Inc. All Rights Reserved. Vicon and its logo are registered trademarks of Vicon Industries Inc.
89 ARKAY DRIVE | HAUPPAUGE, NY 11788 | USA
T: 631.952.2288 | F: 631.951.2288 | TOLL FREE: 800.645.9116
WEB: www.vicon-security.com
UK: +44 (0)1489 566300
MEChaniCal inSTallaTion inSTrUCTionS
• Read and keep these directions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Install in accordance with the manufacturer’s instructions.
• This installation should be made by a qualified service person
and should conform to all local codes.
• DO NOT bundle UTP or Coax signals in the same conduit as
high-voltage wiring.
• To reduce the risk of fire or electrical shock, do not expose these
products to rain, moisture, dripping or splashing.
• No objects filled with liquids, such as vases, shall be placed on
the equipment.
• DO NOT install the unit in a place where the operating ambient
temperature exceeds 75ºC.
• Make sure that the external power supply output voltage is in the
recommended range.
• Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including DVRs) that
produce heat.
• Protect the power cord from being walked on or pinched,
particularly at the power source, convenience receptacles and
the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the
apparatus has been exposed to rain or moisture, do not operate
normally or has been dropped.
• The main plus is used as the disconnect device and shall remain
readily operable.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. This
apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases shall be placed on the apparatus.
WARNING: This apparatus is a Class I product. This product
must be connected to a mains socket outlet through
an AC to DC power supply.
WARNING: The mains plug is used as the disconnect device and
shall remain readily operable.
WARNING: For non-PoE applications, unit is to be connected to
a mains socket outlet through a Listed Class I power
supply rated 12 VDC or 24 VAC.
FIGURE A
Dimensions are for the CE-4US1TPC standalone module.
5.125" (130 mm)
4.54" (115 mm)
4.54"
(115 mm)
1.2" (30 mm)
1.2” (30 mm)
