Vicko BL-05E User manual

Electric Blender

● 300 Watt

Model No: BL-05E

Ref. No: 898-1005

INSTRUCTIONS MANUAL

CAUTION –SAFETY INSTRUCTIONS

1. This device has been designed ONLY for home & domestic use. The manufacturer bears no responsibility for any

malfunction caused by any use which is not compliant with these instructions.

2. The device is not intended to be used in the following occasions as they are not covered by the guarantee:

•Professional use.

•In common kitchen areas which are used by stores’ staff, offices’ staff and other professional workspaces.

•In farmhouses.

•Use by customers of hotels, motels, rooms for rent etc.

3. The device must be used only from adults.

4. The device must be used only for food mixing.

5. Keep the device away from kids.

6. The device is not a toy. Children must be closely supervised when they are near the device.

7. Always treat the power cable with attention. Do not pull the power cable from its main body to unplug the device from

the power jack. Always pull it from its head. Never should you fold or bend the power cable.

8. Do not use the power cable as a handle.

9. Do not leave the power cable wedged through closed doors.

10. Do not pull the power cable around sharp edges.

11. Do not allow the power cable to touch wet or hot surfaces, or leave it hanging over the edges of tables or benches.

12. Do not use the device with any transformer or voltage converter.

13. Do not use a power cable extension with the device.

14. Always connect this device on a power jack that bears additional ground connection.

15. See after the easy accessibility of the device at any given moment in order to assure that the device can be unplugged

fast and easy from the power jack in case of any emergency.

16. Do not use the device if you see the power cable worn off, or if it has fallen or suffered any other type of damage.

Address yourselves on a specialized technician to repair the problem or replace any part.

17. Always consider the device as “active” when it is plugged in the power grid as power circulates through its power circuit

even when the switches are turned to “LOW” and “0” indications. Please note that all electrical sub-parts of the device

are under power (they keep on deriving power) even when all the witches are turned to “LOW” and “0” indications.

18. The device must always be kept indoors in dry climate, away from extreme humidity and very high or very low

temperatures. Avoid also its exposure to any type of radiation.

19. Do not use the device outdoors or in places where sprays or oxygen is used.

20. Keep sufficient distances between the device and walls.

21. Do not use the device next to the edges of a kitchen bench or table as there is a risk of falling.

22. Do not place the device near or on top of another electrical, gas or another microwave oven or washing machine. Place

the device away from flammable objects and any heat source.

23. Do not store or use the device in spots where there is a high risk of falling into a sink or water can spill the device.

24. Do not use the device with wet hands.

25. Do not use the device while you are in any contact with water.

26. Do not sink the device in water or any other type of liquid.

27. Do not touch the plugged device if it has fallen in water but pull it immediately out of the power jack.

28. Do not cover the ventilation openings of the device as overheating can be caused.

29. Do not insert any object in any slot or any other opening of the device.

30. Do not use any piece of equipment not suggested by the manufacturer. They may injure the user and/or destroy the

device.

31. Keep your fingers away from any of the device’s moving part. You can cause injury to yourself!

32. Do not touch the blades barehanded or with any other object (like hair, clothes, cooking utensils, spoons, spatulas,

knives etc.) when the device is connected with the power grid, as there is a danger of electrocution.

33. When the device is turned on, always keep enough empty space around it and among other surrounding objects in

order to allow the free flow of air. Do not place the device near flammable objects like pieces of furniture, pillows,

curtains etc. ATTENTION! Should you place the device on a surface that can cause any harm on it, we recommend

you to place below the device a protective thermal insulating surface.

34. To operate the device always place it exclusively on flat surfaces.

35. Always watch over the device when it is operating.

36. Never move the device during operation.

37. Do not detach any of the accessories while the device operates.

38. Do not attempt to add or remove ingredients to or from any of the jars with your hands, spatula or any other utensil

while the blender is connected with the power grid or operates.

39. Use only the jars included in the package.

40. Do not operate the device while the attached jar is empty.

41. Always use the device on its correct standing position.

42. Do not remove any of the jars that you use from the blender base while the device operates.

43. Do no use a spatula to mix the ingredients while the device is operating.

44. Before cleaning up the blender make sure that it is shut off and that you have disconnected the power cable from the

power grid.

45. Before removing any of the jars you use, shut the blender off.

46. Switch the knob to “0” position before disconnecting the device from the power outlet.

47. The device must always be disconnected from the power source when it is not used. Always switch off and detach the

device before moving, cleaning or storing it.

48. Never store the device while it is still hot.

49. Make sure that the device is always clean before storing it.

ΑΤΤΕΝΤΙΟΝ!

Read all the instructions carefully before you begin using the

device and keep them for future reference. In case you give this

device to someone else, see after giving this instructions

manual as well.

ΑΤΤΕΝΤΙΟΝ!

The use of the device with any other accessory other than those

suggested by the manufacturer and accompanying this device

is forbidden. The use of the device with any third-party

accessory, timer or remote control system is forbidden.

ATTENTION!

This device is not suggested for use by individuals with mental

or physical disabilities (including children) or with a lack of

knowledge and experience, unless they are under the

supervision or guidance of individuals responsible for their

safety. This device is not a toy. Children must be supervised

when they are near the device.

ATTENTION –RISK OF ELECTRIC SHOCK!

In order to avoid the danger of electrocution, do not try to open

the device for fixing it. For any repairs address yourselves to

specialized technical staff.

BEFORE THE FIRST USE

1. When you get the device out of its package, take care in disposing correctly this package off by recycling its materials

(carton and nylon).

2. Keep the plastic bags of the packaging away from infants and children until they get recycled.

3. After you remove the device from its packing, clean it with a damp cloth and not with household cleaning fluids.

Do not use hard cleaning items or wire sponges in order to clean the device or the accessories (both jars,

blades’ base)

Do not place the accessories (both jars, blades’ base) in sterilization devices.

4. Never place the main device under water flow in order to clean it. This is allowed only for its detachable accessories

(both jars and blades’ base).

5. Before connecting the device with the power grid check that the operational voltage and frequency are in accordance

with the ones referred in the technical specifications table at the end of this manual.

6. Place the device on a flat and dry surface.

7. Make sure that all parts of the device are properly mounted before setting it on operation.

8. Before using the device unfold the cord completely and make sure that it does not show any signs of wear.

9. If case you notice that there is a little smell or smoke coming out of the device during the first use, do not worry as this

is normal.

10.Never set the device on when the lid of the jar you are going to use is not in its place and properly sealed. There is a

danger of overflow.

11.Do not fill any of the jars more than their respected allowances which are marked on them with “MAX” indications.

12.Always begin the operation of the device from the lower speed “1” and gradually increase the speed level to “2”, if this

is necessary.

13.Do not use the device for more than 2 minutes continuously. Be sure to always do a pause of at least 15 seconds

between each use. If you use the device for more than 3 times a break of roughly 15 minutes is necessary to allow the

unit to cool down.

14.Let hot ingredients cool down before you mash them (Max. temperature 40oC)

15.Cut large ingredients into small pieces before you mash them with the device.

DEVICE PARTS AND PROPER ASSEMBLY –DISASSEMBLY

1. 600ml Jar Lid

2. 600ml Jar

3. Blades

4. Blades’ Base

5. Motor Base

6. Function Knob

7. 570ml Sports Jar

8. 570ml Sports Jar Lid

Assembly instructions

Assembly of both jars Disassembly of both jars

1. Place the motor base (5) on a smooth and dry surface.

2. Screw completely the blades’ base (4) by turning it counter-clockwise onto the jar (2) or sports jar (7) that you are

about to use. Attention: sports jar is screwed upside down, meaning with its top downside, so you must first remove

its lid with a counter-clockwise move.

3. Place the previous ensemble on the motor base (5) by adjusting it properly on the secure locking.

4. Secure it by gently pressing it down and then turning it counter-clockwise.

5. In the case of the 600ml jar (2), place its lid (1) and secure it with a clockwise move.

6. After you are sure that the function knob is set to “0”, connect the device to the power grid.

7. The device will not operate if the 600ml jar (2) or the sports jar (7) in not secured onto the motor base (5) for security

reasons.

8. To dismantle all of the add-ons please follow the reverse of the actions already described.

USING THE DEVICE

1. Make sure that the device is NOT connected to the power grid.

2. In the case of the 600ml jar (2), remove its lid (1) and screw the blades’ base (4). Then, drop inside the ingredients

you like in parts, after you have previously cut them up. Finally, in any case, secure the lid properly before every

use.

In the case of the sports jar, remove its lid (8), drop inside the ingredients you like in parts and then screw the

blades’ base (4).

3. Place the base –jar/sports jar ensemble on the motor basis and secure it by turning it clockwise.

4. The function knob (6) gives you the ability to adjust the rotational speed of the blades to the desired level. The

settings of the function knob (6) are presented below:

0= Shutdown

1= Low speed

2= High speed

Pulse function offers better control of the function.

Attention: Speed must always change serially by turning the knob first on position “1” and then on position

“2” and never directly from position “0” to position “2”.

5. When the ingredients are mashed to the level you desire, shut the device down by turning the function knob to “0”

position kai disconnect the device from the power plug.

6. To empty the ready mix, remove the jar (2) or the sports jar (7) from the device by turning it counter-clockwise and

pulling it up. Then remove the lid (1) of 600ml jar (2) or the blades’ base (4) for the 570ml sports jar (7) and serve.

Useful advice

•Ingredients should be cut up before they are mashed.

•When you are working on a thick mix you must interrupt the function of the device and remove the ingredients from the

jar’s edges by moving them towards the blades (3) with a plastic spatula.

•When you are working on fruit or vegetables, raw or cooked, you must cut them in small pieces to ease the mashing

process.

•When you are working on various ingredients, it would be better if you first blend the liquids and then add the thicker

ingredients.

•When you are about to mash meat it should have no bones. Likewise, always remove fruit kernels because they can

destroy the blades.

CAUTION: Maximum Temperature for used ingredients is 40°C.

•Stabilize the jar (2) or the sports jar (7) by pushing it gently when the device operates because there is a chance of

movement. In this case, shut the device immediately down and place the jar correctly.

•If you want to fill ingredients in the 600ml jar (2), remove its lid (1) and add the ingredients. Never remove the lid (1) of

the jar (2) while the blender operates. In the case of the sports jar (7), to add ingredients, the whole process of

disassembly –reassembly must be followed.

CLEANING

•Always clean the device after each use.

•Disconnect the device and let it cool down before cleaning it.

•Clean the blender’s outer surface and its base with a slightly wet cloth so as no water passes through any slits and wipe

with a dry soft cloth.

•Pay particular attention in cleaning the blades’ base (4) in order to avoid accidents/ Use a soft cloth or sponge with

some detergent always with careful moves.

•Never sink the device’s main body in water.

•Do not use hard or corrosive detergents in any part of the device.

•Make sure that all parts of the device are completely dry after cleaning and before using them again.

•Do not use sharp objects, hard brushes or oven detergents in order to clean the device.

•Do not place any part of the device in a dishwasher.

TECHNICAL SPECIFICATIONS OF THE PRODUCT

Model:

BL-05E

Ref. No:

898-1005

Output:

Output Power:

300W

Output Frequency:

50/60Hz

Features:

- Power 300W.

- 2 function speeds & PULSE function.

- Stainless Steel blades.

- 600ml plastic jar.

Accessories:

- 570 ml TRITAN sports jar, Plastic blades’ base.

RECYCLING OF USED ELECTRICAL OR ELECTRONIC APPLIANCES

This marking indicates that this product should not be disposed with other

household wastes throughout EU. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, recycle it responsibly to

promote the sustainable reuse of material resources. To return your used device,

please use the return and collection systems or contact the retailer where the

product was purchased. They can take this product for environmental safe

recycling.

PROTECT THE ENVIRONMENT

The product COMPLIES with EU directives WEEE (about recycling) and ROHS

(Restriction of the use of Certain Hazardous Substance

GUARANTEED QUALITY

All products are guaranteed for their quality.

Notes This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue

improving and developing its technology.

You can find and download this user manual in Greek and English language in the website of our company www.vicko.gr

Table of contents

Other Vicko Blender manuals

Vicko

Vicko HB6007A User manual

Popular Blender manuals by other brands

ROTOR

ROTOR 1125.201 instruction manual

Braun

Braun Multiquick 5 Vario series User instructions

ARENDO

ARENDO MIRA 305424 user manual

CHEF-BUILT

CHEF-BUILT CCB-3500 instruction manual

Viconte

Viconte VC-4406 instruction manual

Oster

Oster BLSTAB-CB0 user manual

HOFFEN

HOFFEN MC-3005 instruction manual

Black & Decker

Black & Decker BLC18750DM user guide

Sunbeam

Sunbeam 4182 user manual

Bialetti

Bialetti FMX35 Instructions for use

Black & Decker

Black & Decker BL8000 user manual

Duronic

Duronic BL530 manual

Exquisit

Exquisit MS 3002 wes instruction manual

Lumme

Lumme LU-KP1891A user manual

Binatone

Binatone HB-735 instruction manual

Moulinex

Moulinex LM936E10 manual

Oster

Oster VERSA Performance guide

Ninja

Ninja NN210Q instructions