Viavito Onyx User manual
Folding Exercise Bike Owner’s Manual
Viavito Ltd http://www.viavito.com E-mail: support@viavito.com
- 1 -
IMPORTANT!
Please read all instructions carefully before using this product.
Retain this manual for future reference.
The specifications of this product may vary slightly from the illustrations and are
subject to change without notice.
IMPORTANT SAFETY NOTICE:
NOTE THE FOLLOWING PRECAUTIONS BEFORE ASSEMBLING OR OPERATING
THE MACHINE.
1. Assemble the machine exactly as the descriptions in the instruction manual.
2. Check all the screws, nuts and other connections before using the machine
for the first time and ensure that the trainer is in the safe condition.
3. Set up the machine in a dry level place and keep it away from moisture and
water.
4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the
machine in the area of assembly to avoid dirt etc.
5. Before beginning training, remove all objects within a radius of 2 meters from
the machine.
6. DO NOT use aggressive cleaning products such as detergents to clean the
machine, only use the supplied tools to assemble the machine. Remove drops of
sweat from the machine immediately after finishing training.
7. Your health can be affected by incorrect or excessive training. Consult a
doctor before beginning a training program. This machine is not suitable for
therapeutic or medical purpose.
8. Only do training on the machine as per instructions. Use only original spare
parts for any necessary repairs.
9. This machine can be used by only one person at a time.
10. Wear training clothes and shoes which are suitable for fitness training with
the machine.
- 2 -
11. WARNING! Heart rate monitoring systems may be inaccurate. Over
exercising may result in serious injury or death. If you feel faint stop exercising
immediately.
12. People such as children and handicapped persons should only use the
machine in the presence of another person who can give aid and advice.
13. The power of the machine increases with increasing the speed, and the
reverse. The machine is equipped with adjustable knob which can adjust the
resistance. Reduce the resistance by turning the adjusting knob for the resistance
setting towards stage 1. Increase the resistance by turning the adjusting knob for
the resistance setting towards stage 8.
14. The maximum user’s weight is 100kg. This machine is for indoor, home use
only.
15. WARNING: the safety level of the equipment can be maintained only if it is
examined regularly for damage and wear, e.g. bearings, connection points.
16. Please examine the equipment carefully before you use it, especially the
components most susceptible to wear, e.g. handlebar, end caps and screws which
touching the ground or the connection points frequently.
17. Please stop using the equipment immediately if there are any defective
components and keep it out of use before you replace the components or it is
repaired by a qualified engineer.
18. Unsupervised children should be kept away from the equipment at all times.
19. Saddle post: the minimum insertion depth should not be higher than the
mark of MAX. There is a 95mm adjusting range.
20. WARNING! Inappropriate use of this machine such as while under the
influence of drugs or alcohol or not in line with or excessive usage instructions
may result serious injury or death.
21. The braking system is adjustable to increase or decrease the load.
- 3 -
WARNING: Before beginning this or any exercise program, consult your doctor.
This is especially important for people over the age of 35 or those with health
problems. Read all instructions before using the exercise bike.
Exploded Diagram
- 4 -
Parts List
Part No.
Description
QTY
Part No.
Description
QTY
1
Main Frame
1
16
Saddle Post
1
2
Front Stabiliser
1
17
Plastic Bushing
1
3
Rear Stabiliser
1
18
Tension Controller
1
4
Saddle
1
19
Sensor Wire
1
5
Handlebar
1
20
Flat Washer
1
6 L/R
Crank
1pr.
21
Phillips Screw
1
7 L/R
Pedal
1pr.
22
Flat Washer
2
8 a/b
Computer Cover
1pr.
23
Allen Bolt
4
9
Rear End Cap
2
24
Arc Washer
2
10
Phillips Screw
2
25
Foam Grip
2
11
Front End Cap
2
26
Hand Pulse Wire
2
12
Carriage Bolt
4
27
Handlebar End Cap
2
13
Arc Washer
4
28
Cross Tapping Screw
4
14
Acorn Nut
4
29
Flat Washer
3
15
Pop-pin Knob
1
30
Nylon Nut
3
Note:
Most of the listed assembly hardware has been packaged separately, but some
hardware items have been pre-installed in the identified assembly parts. In these
instances, simply remove and reinstall the hardware as assembly is required.
Please refer to the individual assembly steps and make a note of all pre-installed
hardware.
Preparation
Before assembling, make sure that you will have enough space around the
item. Before assembling, please check whether all the parts needed are
included. To assemble, use the supplied tools. It is strongly recommended
that this machine be assembled by two or more people to avoid possible
injury.
- 5 -
Assembly instructions
Attention:
Please follow these assembly instructions step by step to assemble this bike:
Step1
Attach the Front bottom tube (2) and Rear bottom tube (3) to the main frame (1) with
Carriage bolt (12), Arc washer (13) and Acorn nut (14).
Step 2
Lock the handlebar (5) to the main frame (1) with Allen bolt (23), arch washer (24) and
flat washer (22). Connect the sensor wire (19) and pulse wire (21) to the relevant
cables coming from the Meter (8), and then insert the meter to the bracket of the
handlebar (5).
- 6 -
Step 3
Fix the Pedal (7L/R) to the Crank (6L/R) separately.
Note: Both pedals are labelled L FOR LEFT and R FOR RIGHT.
Important: To tighten, turn the left pedal ANTI-CLOCKWISE and the right pedal
CLOCKWISE.
Step 4
Fasten the Saddle (4) to the Saddle post (16) with Flat washer (29) and Nylon nut (30).
Insert the Saddle post (16) into the post of the Main frame (1).
Align the hole on the Saddle post (16) with the hole on the post of the Main frame (1)
with the pop-pin knob (15). Note: Release the pop-pin knob (15) to adjust the height
of the Saddle post (16).
- 7 -
The Onyx bike is foldable. Please be careful when folding or unfolding the bike!
Product Weight 13.9 kg
0.6 Meter minimum radius of free space is required to use this machine
- 8 -
Computer information
All data displayed is approximate guidance and cannot be used in any medical
application.
Heart rate displayed is an approximate read-out, and may not be used as guidance in
any cardio-vascular related medical or paramedical program.
Operating Resistance Levels
Resistance is increased or decreased by turning the resistance knob (part number 18)
clockwise and anti-clockwise respectively. Once resistance is set start pedaling to begin
your exercise.
Using The Bike Safety precautions
Always ensure the only one person at a time uses the machine
Never push too hard in your exercise. If you feel faint STOP EXERCISING
immediately when the pedal is at its lowest point
Seat height should allow a slight bend in the knee
Never use the machine when another person is standing within the free space
as shown in the diagram above
Always put one foot firmly on the floor before mounting or dismount the bike
This product is not suitable for children
- 9 -
CONDITIONING GUIDELINES
The following guidelines will help you to plan your exercise program and exercise safely.
Remember that proper nutrition and adequate rest are essential for successful results.
WARNING: Before beginning this or any other exercise program consult your
doctor. This is especially important for pregnant women and new
mothers, all people over the age of 35, and those with medical
problems such as heart disease, high or low blood pressure, injuries,
joint problems, obesity and asthma.
WHY EXERCISE?
Exercise has been proven essential for good health and general wellbeing. Regular
exercise will:
Relieve tension and stress
Provide enjoyment and fun
Stimulate the mind
Help maintain stable weight
Control appetite
Boost self-image
Improve muscle tone and strength
Improve flexibility
Lower blood pressure
Relieve insomnia
Other manuals for Onyx
1
This manual suits for next models
1
Table of contents
Other Viavito Exercise Bike manuals
