Vermeiren Timix User manual

VERMEIREN

INSTALLATION MANUAL

Timix

2021-05

Content

Installation manual

- 1 -

Content

Preface........................................................................................................................ 2

1 This product .................................................................................................. 3

2 Scope of delivery .......................................................................................... 4

3 Assembly and adjustments ......................................................................... 5

3.1 Tools ............................................................................................................... 5

3.2 Adjusting the wheelchair to the user ............................................................... 6

3.2.1 Seat depth ...............................................................................................6

3.2.2 Seat inclination (manual adjustment) .......................................................6

3.2.3 Width between armrests ..........................................................................7

3.2.4 Armrest length .........................................................................................7

3.2.5 Armrest lowest and highest angular position ...........................................8

3.2.6 Footrest width (Footrest B06 or BZ7EF) ..................................................8

3.2.7 Footrest length B06..................................................................................8

3.2.8 Leg rests BZ7/BZ8 adjustments ...............................................................9

3.2.9 Footrest BZ10E adjustments ................................................................. 10

3.2.10 Operating console .................................................................................. 11

3.3 Changing the battery ..................................................................................... 11

3.4 Changing wheels or tyres ............................................................................. 12

3.4.1 Driving wheels (Front wheels) ................................................................ 12

3.4.2 Steering wheels (Rear wheels) .............................................................. 13

Timix

2021-05

Preface

Installation manual

- 2 -

Preface

To support you on the installation and repairs of this electric wheelchair, we provide you with this

installation manual. Please read it carefully. If you still have questions after reading this manual,

do not hesitate to contact Vermeiren.

The information in this manual applies to the following wheelchair(s):

 Timix

Important note

Pictures of the product are used to clarify the instructions. Details of the shown product may

deviate from your product.

Available information

On our website http://www.vermeiren.com/ you will always find the most recent version of

the information described in this manual. Please consult this website regularly for possible

updates.

Visually impaired people can download the electronic version of this manual and have it read out

by means of a text-to-speech software application.

User manual

For user and specialist dealer

User manual of applied operating console and battery charger.

For user and specialist dealer

Installation instructions (Instructions for detail adjustments and (dis)assembly)

For specialist dealer

Service manual for wheelchairs

For specialist dealer

Drawings of (spare) parts

For specialist dealer

EC declaration of conformity

Timix

2021-05

Content

Installation manual

- 3 -

1 This product

1. Backrest

2. Adjustable armpads

3. Armrests

4. Operator control

5. Seat

6. Lights

7. Legrest(s)

8. Driving wheels

(Front wheels)

9. Footplate

10. Battery cover

11. Identification plate

12. Steering wheels

(rear wheels)

13. Base frame

Timix

2021-05

Scope of delivery

Installation manual

- 4 -

2 Scope of delivery

The following items are part of the delivery:

 Framework with armrests, operator control, rear and front wheels, seat and backrest

(optional: electrically adjustable seat, backrest, electrical lift)

 Footrests (*)

 Batteries

 Battery charger

 Tools

 User manual of:

o wheelchair

o operating console

o battery charger

 Accessories (if applicable)

Before use, check if everything is included and that no products are damaged.

Please note that the basic configuration may differ in different countries. Contact your specialist

dealer.

(*) Type of footrest/leg rest depends on model.

Timix

2021-05

Content

Installation manual

- 5 -

3 Assembly and adjustments

Important remarks

 Read the user manual of this wheelchair.

 Be aware of the technical details and limits of intended use; see the user manual.



For more information

contact Vermeiren.

3.1 Tools

To (dis)assemble and adjust the wheelchair, the following tools are needed:

 Wrench set no. 10 to no. 13

 Allen keyset no. 4 to no. 6

 Screwdriver

Risk of injuries or damage

 The wheelchair needs to be (dis)assembled and adjusted

by a specialist dealer according to

the instructions in this chapter.

 Only use parts and tools described in this manual.

 Prevent bystanders from accessing the (dis)assembling area.

 Keep the (dis)assembling area clean and tidy, to prevent falling.

 Collect all small parts in a box or bag.

 While (dis)assembling and operating the wheelchair, make sure no objects or body parts

get

caught between moving parts. In particular, pay attention to the position of the cables.

 Turn the wheelchair off before you perform any mechanical adjustments and make sure

that

the free-wheel lever is in braking position.

 Make sure all screws are firmly secured before driving.

 Software changes are only allowed if executed by skilled personnel

, taking into account the

user and environment (stability, accellaration, indoor/outdoor, etc.)

CAUTION

Timix

2021-05

Assembly and adjustments

Installation manual

- 6 -

3.2 Adjusting the wheelchair to the user

3.2.1 Seat depth

The seat is adjustable in 6 different seat depth settings:

1. Loosen the two M6 socket screws (1) on either side

of the frame.

2. Slide seat frame (2) backwards or forwards to get the

desired position. Make sure that inner and outer tube

holes are in line.

3. Insert the 4 socket screws (1) and tighten the nuts

firmly.

3.2.2 Seat inclination (manual adjustment)

Risk of damage



Ask assistance to p

revent the mounting frame with seat from falling

during adjustment

To adjust the seat inclination manually (3 positions):

1. Remove the footrests.

2. Remove the screw Ⓐ that connects the seat frame with the lower frame.

3. Fold the seat frame backwards.

4. Check that the seat frame stays backwards or ask someone that can hold the seat frame

to the back.

5. Remove the screw Ⓑ.

6. Move the inner square tube Ⓒ until the desired seat angle.

7. Retighten the screw Ⓑ.

8. Fold the seat frame back to the front.

9. Retighten the screw Ⓑ.

10. Replace the footrests.

11. Check that the seat frame is firmly fixated.

CAUTION

Timix

2021-05

Content

Installation manual

- 7 -

3.2.3 Width between armrests

Risk of injuries

The maximum width is indicated by two triangles on each side of the seat,

see picture. The outer triangles may not be covered by the frame tube.

To adjust the width of the armrests:

1. Loosen the two M8 socket screws (32) at the bottom of the seat frame, behind the securing

hooks.

2. Adjust the armrest to a comfortable width.

3. Tighten the socket screws (32) firmly.

4. Repeat this at the other side of the wheelchair.

5. Make sure the armrests are positioned identically on both sides of the seat.

3.2.4 Armrest length

The telescopic armrest can be adjusted in 6 positions as follows:

1. If necessary, cut the cable ties that hold the power cable of the console.

2. Loosen the socket screw (33).

3. Slide the inner tube (34) in/out to the desired length.

4. Insert socket screw (33) and tighten properly.

5. Repeat this for the second armrest.

6. Make sure both armrests have the same length.

7. Make sure that both armrests are firmly secured.

8. Tighten the cable with cable ties.

CAUTION

Timix

2021-05

Assembly and adjustments

Installation manual

- 8 -

3.2.5 Armrest lowest and highest angular position

Risk of injuries

Always use two socket bolts and two adjustment holes to tighten the armrest. Never

exceed the

maximum angular adjustment (holes).

To change the end position of the turning angle:

1. Hold the armrest and remove the two socket screws (35).

2. Turn the armrest support at the toothed clamp (36).

3. Make sure that the holes of inner and outer clamp part

match.

4. Insert the two socket bolts again and tighten.

5. Repeat this for the second armrest.

6. Make sure both armrests have the same end positions.

7. Make sure that both toothed clamps (36) are firmly

secured.

3.2.6 Footrest width (Footrest B06 or BZ7EF)

The width between the footrests can be adjusted in 3 positions, over 30 mm by adjusting the front

of seat frame.

1. Remove the footrests.

1. Remove the two M6 socket screws (40) on either side

of the seat frame front.

2. Slide the footrest supports (37) in/out of the seat frame

front (38) to get the desired position. Make sure that

inner and outer tube holes are in line.

3. Insert the 2x2 socket screws (40) and tighten the nuts

firmly.

4. Make sure the footrest supports are positioned

identically on both sides of the seat.

5. Reinstall the footrests/footplate.

3.2.7 Footrest length B06

Risk of damage



Avoid that the footrests make any contact with the ground. Keep a

minimum distance of 50 mm above the ground.

1. Remove the screw (39).

2. Adjust the length of the footrest to a comfortable length (range: 120

mm, steps 20 mm).

3. Tighten the screw (39) properly.

Check that the footrests are positioned identically on both sides.

CAUTION

Table of contents

Other Vermeiren Wheelchair manuals

Vermeiren

Vermeiren V300 DL User manual

Vermeiren

Vermeiren Alesia User manual

Vermeiren

Vermeiren Navix SU User manual

Vermeiren

Vermeiren Jazz S40 User manual

Vermeiren

Vermeiren 708D HEM2 User manual

Vermeiren

Vermeiren Inovys II User manual

Vermeiren

Vermeiren Sedna User manual

Vermeiren

Vermeiren Inovys II User manual

Vermeiren

Vermeiren Gemini 2 User manual

Vermeiren

Vermeiren 708D User manual

Vermeiren

Vermeiren NAVIX User manual

Vermeiren

Vermeiren V300-30 User manual

Vermeiren

Vermeiren Forest 3+ User manual

Vermeiren

Vermeiren Altitude User manual

Vermeiren

Vermeiren Inovys II User manual

Vermeiren

Vermeiren RAPIDO User manual

Vermeiren

Vermeiren 708 delight User manual

Vermeiren

Vermeiren Altitude XXL User manual

Vermeiren

Vermeiren Turios User manual

Vermeiren

Vermeiren Trigo S-line User manual

Vermeiren

Vermeiren V300 ACTIVE User manual

Vermeiren

Vermeiren 708D User manual

Vermeiren

Vermeiren Turios User manual

Vermeiren

Vermeiren Altitude User manual

Popular Wheelchair manuals by other brands

Otto Bock

Otto Bock Skippi plus Service manual

Invacare

Invacare Action 4NG series user manual

SORG

SORG LoopSORG 802 Instructions for use

Designability

Designability WizzyBug User instruction

Excel

Excel G5 KIDS 0285 user manual

M. Bartels

M. Bartels SA-3 Operation manual

nino robotics

nino robotics NIno user manual

Invacare

Invacare MK5 EX Service manual

Invacare

Invacare Solara Spree GT Owner's operator and maintenance manual

Nova

Nova TKW-12 user guide

BCW

BCW Advantage manual

You-Q

You-Q Luca Service manual

interco

interco Ortolight Standard Operating guidelines

Nova

Nova 7190L owner's manual

PaceSaver

PaceSaver Scout M-300 owner's manual

Invacare

Invacare TDX 4 Owner's operator and maintenance manual

Drive Medical

Drive Medical Silver Sport SSP218DDA-SF quick start guide

Rehadapt

Rehadapt Light 3D user guide