VeriSmart RFC1000 User manual

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

1/22

ORIGINAL OPERATING INSTRUCTIONS

Read carefully and retain for future reference

Ceramic Heater

Type: RFC

Models: RFC500; RFC1000; RFC1500; RFC2000

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

2/22

IMPORTANT WARNINGS

Dear Customer:

Thank you for your confidence in us by purchasing this radiator.

These appliances are extremely safe, silent and easy to install.

They do not require special maintenance. They are made of extruded

aluminum, a material of high durability respectful to the environment.

Before starting it for the first time, carefully read these instructions.

Retain them for future references.

GENERAL SAFETY INSTRUCTIONS

1. Please read carefully these instructions before starting the device

for the first time.Keep these instructions, as well as the

guarantee, your invoice and if possible, the complete packing with

all the elements inside.

2. The guarantee will cease to be valid in the case of not

following the recommendations of this manual.

3. Before connecting the appliance, make sure the mains voltage is

the 230 Volts, and correspond to the marked on the nameplate of

the appliance.

4. Check that the power is sufficient to supply the appliances. The

total draw of the radiators' currents must not exceed the capacity

of the circuit breaker that protects them.

5. This radiator cannot be used in rooms with presence of gases or

other flammable products (glues, etc...).

6. WARNING: To prevent overheating, do not cover the device. Do

not use the device to dry clothes.

7. Make sure the power cable or other objects do not come into

contact with the radiator surface while in operation.

8. If the power cable becomes damaged it must be replaced by the

manufacturer or a suitably qualified trades person. Failure to

comply may danger your safety and voids your warranty.

9. Check the device and the supply cord regularly. Do not turn the

device on if it is damaged.

10.PRECAUTION: Some parts of this product can reach very

high temperatures and cause burns. Pay special attention

when children or vulnerable people are around.

11. Do not place the device straight under a power socket.

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

3/22

12. Children under the age of three should not be allowed to touch or

play with the radiator and should be supervised at all times.

13. This device can be used by children under 8 years of age, as well

as by people with reduced physical, sensory or mental

capabilities when suitably supervised and only when they have

been provided the instructions regarding the use of the device

and have understood the risks that could derive from it. Cleaning

must only be carried out by an appropriate adult.

14. Children between3 and 8 years should not turn on or off the

device, unless this is installed or placed in a normal position and

that children are under proper supervision or have received

instructions regarding the use of the device as security and they

have perfectly understood the potential dangers. Children

between 3 and 8 years old should not connect, adjust or clean the

appliance or perform any maintenance measure.

15. Warning: Do not use this heater near baths, showers or

swimming pools. It should not be possible to access the device's

controls from the bath, shower or any other surface that is in

contact with water.(Its use in zones 0 or 1 in bathrooms is totally

prohibited: seek advice from a qualified electrician).

16. For greater safety, this appliance is provided with a device that

interrupts its operation in the case of overheating.

17. This radiator has been designed exclusively to be fixed to the

wall. For further information on the fixing systems, consult the

section "INSTALLATION AND WALL MOUNTING" of this manual.

18. Do not use accessories that have not been recommended by the

manufacturer, as they could entail a potential risk to the user, and

damage the device. Use only original accessories.

19. Keep all the packaging elements (plastic bags, cardboard and

polyethylene)out of the reach of children, as they can cause

potentially dangerous situations.

20. Use this device only for domestic / light commercial use and the

tasks for which it has been designed. This device has not been

designed for industrial use. It must not be used outdoors, in

greenhouses or for animal husbandry. Keep it away from heat,

direct sunlight, humidity and cutting tools. Do not under any

circumstances immerse in water or use this device with wet

hands. In the case of humidity or water in the device, immediately

disconnect the power supply and do not touch the wet parts.

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

4/22

21. Do not attempt to service the device yourself. Contact a qualified

technician.

22. To disconnect the transmitter from the mains pull the plug, never

of the supply cord.

23. Respect the "SPECIFIC SAFETY INSTRUCTIONS FOR THIS

APPLIANCE" listed below

SPECIFIC SAFETY INSTRUCTIONS FOR THIS DEVICE

The appliance must remain in a vertical position.

Make sure the appliance is secured at all times. Please adhere to

the installation distances indicated in this guide.

Do not hang any object in front or on top of the device.

Always ensure that the inlet and outlet air are not obstructed.

Always install the device so that it cannot enter into contact with

any combustible material such as curtains or towels (take into

account the gusts of wind).

To clean the device, consult the instructions in the

"MAINTENANCE" section, because if water enters the air grilles it

could seriously damage the device.

Do not insert any object through the grille or inside the device.

This radiator is designed to be connected by plug to the electric

installation and fixed to the wall installation. Follow the

instructions in "INSTALLATION".

The guarantee will not apply if these instructions have not

been observed.

INSTALLATION

During the first use and for a few minutes, could occur smells and noise due to

the dilatation of some internal parts. This is normal, so you must provide

adequate ventilation. The smells are momentary and quickly will dissipate.

For greater efficiency, make sure to calculate the power or the number of

elements of the apparatus according to the surface of the room. We

recommend contacting your dealer performing this calculation.

Fix the radiator to a firm wall and make sure it is well-levelled, in a room with

no furniture and no objects avoiding around.

Avoid installing the appliance in corners.

We advise against installing the appliance under the windows, because it is

favoring the heat loss.

The radiator must be away, at a minimum distance of 15 cm from any

combustible material, curtains, furniture, chairs, etc.(Fig. 1).

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

5/22

Allow for a minimum distance of 1 m, from the front of the unit to any obstacles

(furniture, walls, curtains, for example) that could hinder its operation.

Also keep a minimum distance of 15 cm between the appliance and the side

walls and any other obstacles (walls, for example) that may affect its function.

Also keep a minimum distance of 35 cm on top the appliance free of obstacles

and a minimum distance of 15 cm from the floor.

WARNING: If this appliance is installed in a bathroom, it must be installed only

within Zones 2 or Outside Zones (Zone3), according BS 7671 Requirements

for Electrical Installations, Section 701. The installation of this appliance within

Zones 0 or 1 of a bathroom is totally prohibited. The figure 2 bellow is only for

information purposes, we suggest you contact a professional electrician.

- Minimum Distances -

Fig.1

Zone 1: Appliances supplied to Safety Extra Low Voltage (SELV).

Zone 2: Electrical Appliances Class II –IP X4

Zone 3: Electrical Appliances protected by RCD 30mA

Fig.2

WALL-MOUNTING

Secure the appliance to the wall, you should use the template attached to the box.

Follow these instructions:

1. Place the template on the floor and against the wall where you will place the

radiator.

2. Mark on the wall the location of the four holes.

3. Drill four holes for inserting the 8 mm plugs.

4. Fix the supports (as shown in the Figure) using the 4 screws and 8 mm plugs .

The appliance is equipped with the following:

- 2 radiator's suspension supports.

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

6/22

5. Hang the radiator in the supports fixed on the wall and, finally , completely screw

up the two security pieces of the supports.

ELECTRIC SUPPLY CONNECTION

This appliance is equipped with a supply cord H05V2V2-F 2x1.0mm² and bipolar

plug without earthing.

Connect the plug to the base outlet.

Check the condition of your electrical installation and connection cables.

This appliance doesn't require earthing connection, due it has double electrical

insulation.

Contact a licensed electrician for assistance.

TECHNICAL CHARACTERISTICS

Brand

Model

RFC

Type

RFC500

RFC1000

RFC1500

RFC2000

Rated Voltage

230 V~

Rated Frequency

50 Hz

Rated Power Input

500 W

1000 W

1500 W

2000 W

Electrical

Protection Class

IP Protection

Degree

IP24

Dimensions

(LxHxD) (mm)

380x585x105

510x585x105

640x585x105

770x585x105

Weight (kg)

5,7

8,7

11,50

14,8

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

7/22

DIGITAL PROGRAMMABLE THERMOSTAT

The radiator is equipped with a digital, programmable thermostat.

Operation Guide

1.- Presentation

The programmable electronic thermostat has been specially designed to regulate

electric radiators screens.

It will become your best ally to optimize its energy consumption while

increasing your comfort.

- Large screen with backlighting.

- Weekly Programming in Intervals of 30 min.

- Temporary override function.

- Wire Pilot Function with 6 orders. (Only France)

- Holiday or Reception Function.

- 1 Configuration Menu (User).

- Consumption Control Radiator.

- Open Windows Function.

1.1 Screen

1. “ ”Operation Mode. The active

operation mode is displayed in the box.

2. “ ” Programme Number (P1 to P9), (U1 to

U4) or System Settings Menu (01 to 11).

3. “ ” System Settings Menus.

4. “ ” Keypad Lock Activated.

5. “ ” Room Temperature Indicator.

6. Type of time display (12h AM/PM or 24h).

7. Graphic view of the programme of the current day.

8. Time, temperature and System Settings Menu setting area.

9. “ ” Indicator of appliance in operation.

10. “ ” Help pictogram to create programmes / Status of the programme in normal

mode / Control Menu of the radiator's consumption.

11. "" Wire Pilot function indicator pictogram. (Only France)

12. Current day.

13. “ ”Temporary cancellation function activated, or "ITCS" if flashing.

14. “ ” Window Opening Function (see section 5, System Settings Menu 07).

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

8/22

1.2 Keypad

Radiator Start / Stop Key (On / Off) " "

Minus Key (-)

Validation Key (OK)

Plus Key (+)

Right Navigation Key (►)

2.- First Use

This section will guide you when putting the device into operation for the first time.

NOTE: To restore the factory settings, consult section 5 "System Settings

Menu".

2.1 Energy Supply

Your radiator can be Activated/Start (On mode) and Deactivated/Stop (Off mode) by

pressing (On/Off).

Press the On / Off key once: The appliance will emit two short beeps and the

screen will turn off for a few seconds.

ATTENTION: In case the device's power disconnects, the memory of the settings

recorded lasts for approximately one hour. After that time, we recommend you

check the settings installed.

2.2 Setting the Time and Date

-First of all, move the cursor by pressing the right navigation key (►) until the

symbol with a watch “ ” is selected.

-Use the (-) and (+) keys to adjust the hours. When the correct time has been set

press (OK) and proceed to set the minutes.

-When you have set the minutes press (OK).

-Then adjust the Day (“1” Monday,…, “7” Sunday) and press (OK).

-When the Day of the Week has been set, set the Day of the Month (01 to 31) and

press (OK).

-Then adjust the day Month (01,…,12) and press (OK).

-Finally, set the Year (2016,…,2020, etc.) y pulse (OK).

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

9/22

3. Operation Modes

Press ►to move along the display and select the

different operation modes “ ”,

selecting the one required and press (OK).

3.1 Timer Mode

The Timer mode “ ” will allow setting a temperature for a specific amount of time.

You can use this mode during a holiday period or to temporarily cancel a

programme.

-First, you must set the duration with the keys (-) and (+), the time “H” up to 24 h.

and the days in “d” onwards and confirm by pressing the (OK) key. The duration

can be set anywhere from 1 hour up to 44 days.

-Then, set the temperature required with keys (-) and (+), and confirm with the

(OK) key (Factory setting 21ºC).

-The Timer symbol “ ” will flicker and you will see the hour/day number count down

until the end of the period.

3.2 Manual Comfort Mode

The Manual Comfort mode “ ”enables setting a temperature that will be maintained

throughout the day. The temperature will be set with the (-) & (+) keys. (Factory

setting 21ºC)

3.3 Automatic Mode

By selecting the Automatic operation mode “”, the appliance will work with the

preset programme “P1”, as explained in the following image.

Monday to Friday

- Time Frames -

Saturday and Sunday

- Time Frames -

Nota.- If you need change the preset temperatures, do so in Comfort and ECO

mode.

= Comfort Temperature, space with bars,

Tª that you want to achieve.

= Reduced Temperature, space without

bars, Tª that you don't want to be reduced.

VeriSmart_RFC_ENG_Rev.3_18-04-2018

Made in Spain

10/22

If you want to modify, in a timely manner, the preset temperature during the current

time slot, press the (OK)key and adjust with the keys (-) or (+) and displayed the

symbol “ ” which will keep the set temperature until end of the time slot.

3.4 ECO Mode

In ECO mode “ ”, the Reduced Temperature will be maintained throughout the

day. You can set your own ECO temperature by pressing the (-) and (+) keys.

NOTE: The preset default reduced temperature is 18°C.

3.5 Frost Protection Mode

Use this frost protection mode “ ”,if you want to protect your property from

possible freezing, for example, if you are leaving your property for a extended

period during winter.

The preset minimum temperature is 5°C (default value). It can be set in System

Settings menu section 5, number 05.

3.6 Program Mode

Once you have selected the Program mode “ ”,you can choose between nine

preset programs (P1 to P9). These are defined in the last pages of this manual.

Select with the keys (-) and (+) and press (OK) to confirm.

The radiator will go straight into Automatic mode “ ” and run the programme by

you selected.

Factory Preset Programs (P1,…, P9)

P1: Morning, Afternoon & Weekend

P2: Morning, Noon, Evening & Weekend

P3: Week & Weekend

P4: Afternoon & Weekend

P5: Morning & Afternoon (Bathroom)

P6: Morning, Afternoon & Weekend

P7: 7H - 19H (Office)

P8: 8H - 19H & Saturday (Shop)

P9: Weekend (Secondary House)

Remember:

= Comfort Temperature, space with bars, Tª that you want to achieve.

= Reduced Temperature, space without bars, Tª that you don't want to be reduced.

In Programme mode “”, after programme “P9”, there are four programmes (U1 to

U4). These are programmes that you can personalise according to your needs.

This manual suits for next models

Table of contents

Other VeriSmart Heater manuals

VeriSmart

VeriSmart EcoHeat C3 User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide