Venturer PLV16100 User manual
E
16
10” LCD DIGITAL TV
INSTRUCTION MANUAL
Need More Help?
DO NOT RETURN THIS PRODUCT TO THE STORE
Please visit online help at
http://www.venturer.com
PLV16100
E
1
SAFETY PRECAUTIONS
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure
that may be of sufcient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USERSERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
• DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
• TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT OF
WALL OUTLET, THEN FULLY INSERT.
The symbol for Class II
(Double Insulation)
WARNING :
• To reduce the risk of re or shock hazard, do not
expose this unit to rain or moisture.
• The AC/DC adapter and unit shall not be exposed
to dripping or splashing and that no objects lled
with liquids, such as vases, shall be placed on
unit.
• AC/DC adaptor is used as disconnect device and
it should remain readily operable during intended
use. In order to disconnected the unit from
the mains completely, AC/DC adaptor should
be disconnected from the mains socket outlet
completely.
• Battery shall not be exposed to excessive heat
such as sunshine, re or the like.
PLACEMENT INFORMATION
• Do not use this unit in places which are extremely
hot, cold, dusty or humid.
• Do not restrict the air ow of this unit by placing it
somewhere with poor air ow, by covering it with
a cloth, by placing it on bedding or carpeting.
SAFETY INFORMATION
• When connecting or disconnecting the AC/DC
adapter, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard.
• When you are not going to use the unit for a long
period of time, disconnect the AC adapter.
CONDENSATION INFORMATION
• When left in a heated room where it is warm
and damp, water droplets or condensation
may form inside the equipment. When there is
condensation inside the unit, the unit may not
function normally. Let the unit stand for 1-2 hours
before turning the power on or gradually heat the
room and let the unit dry before use.
RATING PLATE LOCATION
The rating plate is located on the rear of unit.
FCC STATEMENTS
NOTE: This unit has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This unit generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communication.
However, there is not guarantee that interference
will not occur in a particular installation. If this
unit does cause harmful interference to radio or
television reception, which can be determined by
turning the unit off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the unit and
receiver.
- Connect the unit into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
WARNING:
• Changes or modications to this unit not expressly
approved by party responsible for compliance
could void the user authority to operate unit.
• Should any trouble occur, disconnect the AC/
DC adapter and refer servicing to a qualied
technician.
E
2
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(Includingampliers)thatproduceheat.
9) Do not defect the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
providedplugdoesnottintoyouroutlet,consultanelectricianforreplacementoftheobsolete
outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Onlyusedetachments/accessoriesspeciedbythemanufacturer.
12) Useonlywiththecart,stand,tripod,bracket,ortablespeciedbythemanufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart /
apparatus combination to avoid injury form tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhentheapparatushas
been damaged in any way, such as power-supply cord or plug is damages, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
E
3
Before turning on your television set for the rst time, be sure to place it on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the
ventilation grid at the rear and be sure to leave sufcient gaps around the unit as shown.
QUICK INSTALLATION
1. Connect the TV antenna.
2. Connect the AC/DC adapter.
3. Press the / ON button to turn on the unit.
4. Press the ENTER button.
5. Press the or button to select “Air” or “CATV”,
then press the ENTER button to start auto scan.
6. The unit will immediately search all channels for
those with adequate signal strength and store
those channels with signals in memory. The unit
will take a few minutes to nish auto scan and
after this is completed, the unit will switch to the
rst channel found.
Proceed wtih auto scan?
Please select antenna type.
E
4
CONTENTS
SAFETY PRECAUTIONS .................................................................................... 1
IMPORTANT SAFETY INSTRUCTIONS ............................................................. 2
QUICK INSTALLATION ...................................................................................... 3
CONTENTS ......................................................................................................... 4
ACCESSORIES ................................................................................................... 5
GETTING STARTED ........................................................................................... 5
CONTROL REFERENCE GUIDE .................................................................. 6 - 7
CONNECTIONS ............................................................................................. 8 - 9
Connecting a TV Antenna .............................................................................................. 8
Connecting to other Equipment with Video Output (VCR, Camcorder, Video Game System,
Cable, Satellite system, etc.) ......................................................................................... 8
Connecting the AC/DC Adapter ..................................................................................... 9
USING HEADPHONES ....................................................................................... 9
USING THE TV .................................................................................................. 10
Searching for TV Channels Automatically ................................................................... 10
Manual Searching for TV Channels ............................................................................. 10
Watching Television ..................................................................................................... 10
TV SETUP ................................................................................................... 11 - 13
Picture Setting ............................................................................................................. 11
Sound Setting .............................................................................................................. 11
Timer Setting ............................................................................................................... 12
Misc Setting ................................................................................................................. 12
TV Channel Setting ..................................................................................................... 13
TROUBLESHOOTING GUIDE .......................................................................... 14
E
5
ACCESSORIES
Please check and identify the supplied accessories.
AC/DC Adapter ........................................................................................................................ x 1
Remote Control (with batteries) .............................................................................................. x 1
GETTING STARTED
USING THE REMOTE CONTROL
• Point the remote control at the remote sensor
located on the unit.
• When there is a strong ambient light source, the
performance of the infrared remote sensor may
be degraded, causing unreliable operation.
• The recommended effective distance for
remote operation is about 16 feet (5 meters).
TO INSTALL BATTERIES
1. Open the battery door.
2. Insert 2 “AAA” batteries.
BATTERY REPLACEMENT
When the batteries become weak, the operating
distance of the remote control is greatly reduced
and you will need to replace the batteries.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same
or equivalent type.
NOTES
• If the remote control is not going to be used
for a long time, remove the batteries to
avoid damage caused by battery leakage
corrosion.
• Do not mix old and new batteries. Do not mix
ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they
become weak.
• Weak batteries can leak and severely damage
the remote control.
• WARNING : Do not dispose of batteries in a
re. Batteries may explode or leak.
E
6
CONTROL REFERENCE GUIDE
REMOTE CONTROL
1) MUTE Button
Press to turn off the sound.
2) MENU Button
Press to display the on-screen menu or switch
back to the previous menu screen.
3) CURSOR ( , , , ) Buttons
Use to highlight selections on a menu screen
and adjust certain settings.
ENTER Button
Conrm selection on a menu screen.
4) DISPLAY Button
Press to display information on the current
channel.
5) VOL + / VOL - Button
Press to increase/decrease the volume.
6) LAST CH
Press to switch repeatedly between the last
two channels displayed.
7) STANDBY/ON Button
Press to turn ON the unit or put it in STANDBY
(OFF) mode.
8) FUNCTION Button
Press to switch between TV / AV IN.
9) LCD MODE Button
Press to Select from preset screen display
settings to match the type of show you are
watching.
10) CH / CH Buttons
Press to select the channel upward or
downward.
11) NUMERIC Buttons
Press to enter numbers or go directly to a
specic channel.
12) •[dot]Button
Press to enter digital sub-channels with the
numeric buttons (i.e. 11.3 or 12.7).
E
7
CONTROL REFERENCE GUIDE
FRONT & BACK VIEWS
1. Left speaker
2. TV ANTENNA terminal
Connects a TV antenna or CATV cable.
3. AUDIO IN (Left/Right)/ VIDEO IN
jacks
4. Headphones jack
5. DC IN 9V-12V jack
6. Remote sensor
Point the remote control here.
Standby indicator
7. Color LCD screen
8. Right speaker
9. - VOL + controls
Adjusts the volume level and highlights
selections (Left & Right) on the TV menu
screen.
CH buttons
Press to conrm selections on the TV
menu screen and / to move the TV
channels.
FUNCTION button
Selects TV / AV IN
MENU button
Enters the on-screen TV menu.
/ ON button
Turns the unit on and off.
E
8
CONNECTIONS
CONNECTING A TV ANTENNA
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
NOTE
For receiving over-the-air TV broadcasts, we recommend that you use an external xed antenna. Should
you require the use of a temporary antenna, please ensure that you purchase an antenna with sufcient
ability to receive in weak signal areas. Only when you are in close proximity to a transmitter will a temporary
antenna reproduce a signal as strongly as a xed antenna.
To TV
Antenna
terminal
To Home
Antenna
terminal
Cable without a CATV
converter
Combination VHF/UHF
antenna
(ATSC / NTSC signal)
Separate VHF/UHF
antenna
(ATSC / NTSC signal)
CONNECTING TO OTHER EQUIPMENT WITH VIDEO OUTPUT
Connecting to a VCR / Camcorder
/ Video Game System / Cable /
Satellite System
Connects the AUDIO / VIDEO cable (not
included) as shown:
Make sure you connect the cable from
the other equipment (AUDIO/VIDEO
OUT) to this unit (AUDIO/VIDEO IN).
NOTE
Please refer to the user manual for the
other equipment for more information.
To connect to other equipment such as a VCR, camcorder, video game system, cable or satellite system
etc.
To AUDIO /VIDEO
IN jacks
To AUDIO / VIDEO OUT jacks
E
9
CONNECTIONS
CONNECTING THE AC/DC ADAPTER
NOTES
• The included AC/DC adapter is for use with
this unit only. Do not use them with other
equipment.
• TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF WALL OUTLET, THEN
FULLY INSERT.
• When the AC adapter is plugged in, the
unit is not completely disconnected from
the main, even when the power is turned
off.
• Be sure the AC/DC adapter is disconnected and all functions are off before making connections.
• Make sure that all the components are connected correctly.
• When you are not going to use the unit for a long period of time, disconnect the AC/DC adapter.
This AC/DC adapter operates on AC 100V
- 120V.
1. Plug the AC/DC adapter cord into the DC-
IN 9V-12V on the unit.
2. Connect the AC/DC adapter into a wall
outlet.
To AC
wall
outlet
To DC
IN 9V-
12V
AC/DC
adapter
USING HEADPHONES / EARPHONES
• Turn down the volume before
connecting headphones / earphones
to the unit, then adjust the volume to
your desired level.
• When headphones / earphones are
connected, no sound will come from
the front speakers.
NOTE
Excessive sound pressure from
earphones / headphones can cause
hearing loss.
Headphones /
Earphones
(1/8” [3.5mm] diameter
plug)
Table of contents
Other Venturer LCD TV manuals
Venturer
Venturer PLV76176 User manual
Venturer
Venturer PLV16070 User manual
Venturer
Venturer PLV36220S1 User manual
Venturer
Venturer PLV76198 User manual
Venturer
Venturer 15" LCD TV PLV7615H User manual
Venturer
Venturer PLV76156 User manual
Venturer
Venturer PLV36199S1 User manual
Venturer
Venturer PLV16198 User manual
Venturer
Venturer PLV1615S User manual
Venturer
Venturer PLV36190S5W User manual
