Vents VP Series User manual
CEILING FAN
VP SERIES
USER'S MANUAL
2
CONTENTS
VP
Purpose
Delivery set
Designation key
Technical data
Safety requirements
Fan design
Mounting and operation guidelines
Connection to power mains
Technical maintenance
Storage regulations
Manufacturer's warranty
Acceptance certificate
Seller information
Connection certificate
Warranty Card
р. 3
р. 3
р. 3
р. 4
р. 5
р. 5
р. 6
р. 9
р. 9
р. 9
р. 12
р. 14
р. 14
р. 14
р. 15
3
VP
PURPOSE
Fan
Fastening kit for wall side mounting
Suspended holding brackets
User's manual
Packing
DELIVERY SET
The fan design is constantly being improved, so some models can slightly differ from those ones
described in this manual.
The VP ceiling fan in a metal casing with 100, 125 and 150 mm exhaust outlets (hereinafter
"Fan") is intended for ventilation systems of industrial or residential buildings, swimming
pools, blocks of flats, offices, hospitals, restaurants and other spaces heated during the winter.
The air discharged by the fan must not contain dust, solids, sticky substances and fibrous
materials.
The ambient air temperature must not exceed the limit values given in Table 2.
The fan is designed for installation between the floor slab and the suspended ceiling attached
to the ceiling structure on mounting brackets or to a wall on side mounts (VP 100 and
VP 125 only).
The fan is designed for extended periods of continuous operation without disconnection
from power mains.
The products meet the requirements of IPX4 hazardous parts access and water ingress
protection standard.
DESIGNATION KEY
Modification:
Q- silent-running
Optional equipment:
К - backdraft damper
Outlet diameter [mm]:
100, 125, 150
Fan designation:
VP - ceiling fan
X X X X
VP 100 K Q, VP 100 K
VP 125 K Q, VP 125 K
1 item
1 item
2 items
1 item
1 item
1 item
-
4 items
1 item
1 item
Sample designation:
VP 125 K Q - ceiling fan, outlet
diameter - 125 mm, with check valve
and silent-running motor.
VP 150 K
4
TECHNICAL DATA
The names of the fans, their parameters and connecting dimensions are given in tables 1, 2.
H1
L
H1
Table 1
1.1
1.1
1.1
1.1
1.2
Figure 1.1 Figure 1.2
Table 2
VP 125 K Q VP 125 K
VP 100 K Q VP 100 K
Voltage [V]
Frequency [Hz]
Power [W]
Current [A]
3
Maximum air capacity [m /h]
R.P.M.
Sound pressure level at 3 m distance [dB(A)]
o
Max. transported air temperature [ C]
IP rating
Fan type
Dimensions, mm Weight,
kg
VP 150 K
VP 125 K Q
VP 125 K
VP 100 K Q
VP 100 K
VP 150 K
Fan type
Pict
VP
5
SAFETY REQUIREMENTS
Disconnect the fan from power mains prior to any installation, setup, maintenance and repair
operations.
The fan must be connected by an expert qualified for unassisted operations with electrical
installations up to 1,000 V after being made familiar with the present technical certificate.
Prior to installation check for any visible damage to the impeller, casing and grille.
Also check the casing flow channel for any foreign objects which may damage the impeller
wheel blades.
The fan may only be used as intended. No modifications or alterations are allowed.
The fan is not intended for operation by children or any persons with reduced physical, mental
or sensory capacities, lacking practical experience or knowledge unless controlled or briefed
on the device operation by the person responsible for their safety.
The fan may not be used to handle air containing highly flammable substances or vapours
such as alcohol, petrol etc.
The fans take 230 V 50/60 Hz single-phase alternating current.
Children being supervised not to play with the appliance!
FAN DESIGN
1
2
3
1
4
5
6
7
The VP ceiling fan (Fig. 2) comprises of casing 1 with lid 2.
The casing has an exhaust outlet 3 with a check valve
which prevents back flow of air while the fan is off.
Terminal box 4 containing the terminals for
connecting the fan to power mains is mounted
to the casing. Grille 5 with air filter 6 is attached
to the casing with screws.
Decorative front panel 7 locks into the slots on grille 5.
The casing houses a single-phase electric motor
with a centrifugal impeller and backward-curved
blades. The electric motor has integrated thermal
protection and restarts automatically.
The replacement of parts of the safety suspension
system device shall be performed by the
manufacturer, its service agent or suitably qualified
persons!
Figure 2
VP
6
INSTALLATION AND OPERATION INSTRUCTIONS
The fan is installed between the floor slab and the suspended ceiling by means of
two mounting brackets. The distance between the bracket attachment point and the
suspended ceiling must be within 165 - 390 mm.
The fan installation steps are given in Fig. 5, 6.
The power is supplied via an external terminal box mounted to the fan casing.
WARNING: If unusual oscillating movement is observed, immediately stop using the
ceiling fan and contact the manufacturer, its service agent or suitably qualified persons!
The fan is to be installed so that the blades are more than 2.3 m above the floor!
Figure 4
Figure 3
VP
7
280 mm
QF
1
3
5
7
2
4
6
8
VP 100 K Q, VP K
VP 125 K Q, VP 125 K
Figure 5
VP
8
QF
403,5 mm 250 mm
VP 150 K
1
3
5
2
4
6
Figure 6
VP
9
Disconnect the damper from the power supply (electric mains) prior to any work on the unit.
Power mains connection shall only be performed by a qualified electrician.
The nominal electrical parameters of the fan are given on the manufacturer's label.
Any tampering with the internal connections is prohibited and will void the warranty.
The fans take 230 V 50/60 Hz single-phase alternating current.
The fan connections (cables and wires) must be durable, insulated and heat-resistant.
The external lead-in (230 V 50/60 Hz) must be equipped with an automatic circuit breaker
built into the stationary wiring to disconnect all the mains phases.
The location of the QF external switch must ensure unobstructed access for shutting down
the fan quickly if required.
The protection trip current must be consistent with the current consumption of the fan.
The recommended nominal current of the automatic cutout switch is 0.6 A,
2
the recommended minimum conductor cross-section is 0.5 mm .
The conductor cross-section values are given for reference only while the actual selection
must be based on the maximum permissible wire heating which depends on the wire type,
its insulation, length and installation method (i.e. overhead, in pipes or inside the walls).
CONNECTION TO POWER MAINS
TECHNICAL MAINTENANCE
STORAGE REGULATIONS
The technical maintenance of the fan includes periodic cleaning of the fan surfaces from
dust and dirt.
The filter must be replaced on a need-to-do basis, but at least every 6 months.
The impeller cleaning and filter replacement steps are given in Fig. 9.
The impeller blades must be thoroughly cleaned from dust and dirt every 6 months.
The fans must be stored in the original packing in a well-ventilated area at temperatures
from +5 °C to +40 °C and relative air humidity up to 80 % (at Т= +20 °C).
VP
10
1
The electrical connections are terminated on the terminal block located inside the fan casing
in accordance with the Wiring Diagram and the terminal designations (Fig. 7).
The terminal designation diagram is given on a label inside the terminal box.
2
3 4
The steps for connecting the fan to power mains are given on Fig. 8.
L
N
X1
1
2
3
N
L
QF
PE
~230 V
50/60 Hz
4
РЕ
Figure 7
Figure 8
VP
This manual suits for next models
5
Table of contents
Other Vents Fan manuals
Vents
Vents CF User manual
Vents
Vents OV Series User manual
Vents
Vents Solo RA1-50-9 R V.2 User manual
Vents
Vents HBF Series User manual
Vents
Vents KSB315R1 User manual
Vents
Vents VCN 100 User manual
Vents
Vents Solo RA1-35A-9 P User manual
Vents
Vents CBF 200 User manual
Vents
Vents VKM Series User manual
Vents
Vents TwinFresh Easy Series User manual
Vents
Vents TwinFresh R-50 User manual
Vents
Vents VK Series User manual
Vents
Vents D Series User manual
Vents
Vents Fan User manual
Vents
Vents VKMz 125 User manual
Vents
Vents FlexiVent 0811125/63x2 User manual
Vents
Vents 100 Quiet-dMEV DC User manual
Vents
Vents 100 Base-I User manual
Vents
Vents Quietline 100 User manual
Vents
Vents VDK Series User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
