Vents Solid User manual

AXIAL FAN

User’s manual

www.ventilation-system.com

Solid

Solid Glass

Solid One

Wave

Wave One

Flip

Flip One

CONTENTS

Delivery set ............................................................................................................................................................................................................................................ 8

Brief description ................................................................................................................................................................................................................................. 8

Operation guidelines ....................................................................................................................................................................................................................... 8

Designation key................................................................................................................................................................................................................................... 9

Mounting................................................................................................................................................................................................................................................. 10

Maintenance.......................................................................................................................................................................................................................................... 11

Troubleshooting.................................................................................................................................................................................................................................. 12

Storage and transportation regulations............................................................................................................................................................................... 12

Manufacturer’s warranty................................................................................................................................................................................................................ 13

This user’s manual is a main operating document intended for technical, maintenance, and operating staﬀ.

The manual contains information about purpose, technical details, operating principle, design, and installation of the

Vents Solid (Wave/Flip) unit and all its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems and should

be able to work in accordance with workplace safety rules as well as construction norms and standards applicable in the

territory of the country.

READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.

COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG

SERVICE LIFE OF THE UNIT. KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT.

YOU MAY NEED TO REREAD THE INFORMATION ON THE PRODUCT SERVICING.

All operations described in this manual must be performed by

qualiﬁed personnel only, properly trained and qualiﬁed to install,

make electrical connections and maintain ventilation units.

Do not attempt to install the product, connect it to the mains, or

perform maintenance yourself.

This is unsafe and impossible without special knowledge.

Disconnect the power supply prior to any operations with the unit.

All user’s manual requirements as well as the provisions of all the

applicable local and national construction, electrical, and technical

norms and standards must be observed when installing and

operating the unit.

Disconnect the unit from the power supply prior to any connection,

servicing, maintenance, and repair operations.

Connection of the unit to power mains is allowed by a qualiﬁed

electrician with a work permit for the electric units up to 1000 V after

careful reading of the present user’s manual.

Check the unit for any visible damage of the impeller, the casing, and

the grille before starting installation. The casing internals must be free

of any foreign objects that can damage the impeller blades.

While mounting the unit, avoid compression of the casing!

Deformation of the casing may result in motor jam and excessive

noise.

Misuse of the unit and any unauthorised modiﬁcations are not

allowed.

Do not expose the unit to adverse atmospheric agents (rain, sun, etc.).

Transported air must not contain any dust or other solid impurities,

sticky substances, or ﬁbrous materials.

Do not use the unit in a hazardous or explosive environment

containing spirits, gasoline, insecticides, etc.

Do not close or block the intake or extract vents in order to ensure the

eﬃcient air ﬂow.

Do not sit on the unit and do not put objects on it.

The information in this user’s manual was correct at the time of the

document’s preparation.

The Company reserves the right to modify the technical

characteristics, design, or conﬁguration of its products at any time in

order to incorporate the latest technological developments.

Never touch the unit with wet or damp hands.

Never touch the unit when barefoot.

BEFORE INSTALLING ADDITIONAL EXTERNAL DEVICES, READ THE

RELEVANT USER MANUALS.

This unit is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the unit by a person responsible for

their safety.

Children should be supervised to ensure that they do not play with

the unit.

This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved.

Cleaning and user maintenance shall not be made by children

without supervision.

Children shall not play with the appliance.

Precautions must be taken to avoid the back-ﬂow of gases into the

room from the open ﬂue of gas or other fuel-burning appliances.

The appliance may adversely aﬀect the safe operation of appliances

burning gas or other fuels (including those in other rooms) due to

back ﬂow of combustion gases. These gases can potentially result

in carbon monoxide poisoning. After installation of the unit the

operation of ﬂued gas appliances should be tested by a competent

person to ensure that back ﬂow of combustion gases does not occur.

Connection to the mains must be made through a disconnecting

device, which is integrated into the ﬁxed wiring system in accordance

with the wiring rules for design of electrical units, and has a contact

separation in all poles that allows for full disconnection under

overvoltage category III conditions.

Ensure that the unit is switched oﬀ from the supply mains before

removing the guard.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED DOMESTIC WASTE.

DELIVERY SET

Fan - 1 pc.

Screws with dowels - 4 pcs.

User’s manual - 1 pc.

Packing box - 1 pc.

Insulating gasket - 1 pc.

BRIEF DESCRIPTION

The product is an axial fan for exhaust ventilation of small and medium-sized premises heated in winter. The design of the fan

may include a back valve that prevents air from ﬂowing into the room when the fan is oﬀ. The fan is designed for connection

to ø100/125 mm air duct.

OPERATION GUIDELINES

The fan is rated for connection to single-phase AC power mains.

Power mains parameters are stated on the unit packaging and/or the label on the unit casing.

Ingress protection rating against access to hazardous parts and water ingress is IP44.

The fan is rated for indoor operation at ambient temperatures ranging from +1 °C to +40 °C.

The unit is rated as the Class II (120 V, 60 Hz).

Power mains parameters are stated on the unit packaging and/or the label on the unit casing.

WARNING! Do not operate the fan outside the specied temperature range.

DESIGNATION KEY

100 Solid V L

Motor modication

_ — basic motor

L — motor on ball bearings

Additional options

V — pull cord switch

Fan series

Solid

Solid Van

Solid Glass

Wave

Wave One

Flip

Flip One

Outlet duct diameter [mm]

100/125

MOUNTING

The fan is designed for wall (with the motors on ball and slide bearings) or ceiling (with the motors on ball bearings only, L

option) mounting and can be used for direct outdoor air exhaust through a round duct or a duct system.

In case of installation through a duct system, select the duct cross section in accordance with the fan size (Fig. 1).

1. When installing the fan with direct air discharge outside through the wall, be sure to install a ventilation grille with louvre

shutters or a ventilation hood on the outside to prevent rainfall, snow, leaves, branches, etc. from entering the duct.

To reduce the risk of condensate forming in the duct, the space between the hole in the wall and the duct must be

insulated.

Install the air duct with the minimum slope of 1...2° downwards to the outer wall side for condensate removal (Fig 2).

2. The duct system should not exceed 5 meters and have more than two bends.

3. During ceiling installation, vertical air discharge upwards is not allowed even if there is a protective outer hood on the

roof.

For ceiling mounting and air discharge to the roof, the duct system must include a condensate drain (Fig. 3).

A condensate drain is not included in the delivery set of the fan and can be ordered separately.

Check the fan for any visible damages of the impeller, the casing and the grille before starting installation. The casing

internals must be free of any foreign objects which can damage the impeller blades.

While mounting the unit, avoid compression of the casing!

Deformation of the casing may result in the motor jam and excessive noise.

Mark and drill the fan mounting holes, attach the insulation gasket, and install the fan.

Dowels and screws are designed for concrete and brick walls.

If the walls are made of the other material (drywall, wood,etc.), use the fasteners appropriate for these materials to fasten

the fan (not supplied with the fan and must be purchased separately).

WARNING!

When the fan is equipped with a non-return valve, operation of the fan without the valve is prohibited.

This manual suits for next models

Table of contents

Other Vents Fan manuals

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual