Ventair Mixflow Assembly instructions

INSTRUCTIONS

We recommend that you please check the following before installing

this product:

The VMFIL mixflow range in-line exhaust

fan that has been manufactured in accordance with the rigorous

standards of production as defined by the International Quality

Standards ISO 9001.All the components have been checked and tested

at the end of the manufacturing process.

1. The correct size has been received

2.The correct model has been received

3. The details on the rating label correspond to the electrical supply:

voltage, frequency etc.

Remove the unit from packaging and inspect for shipping damage

upon receiving this exhaust fan. lf the product is found to be damaged,

immediately contact your local authorised supplier.

This exhaust fans is suitable for operation within indoor

“environments only”.

This fan is suitable for the exhaust or supply of both conditioned and

un-conditioned airstreams within the temperature ranges(inclusive

of duct airstream’s temperature) of (-10℃ up to+50 ).℃

(a) Use this unit only in the manner intended by the manufacturer. lf you

have any questions contact the manufacturer.

(b) This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been given

supervision or instructions concerning use of the appliance by a

person responsible for their safety.Children should be supervised

to ensure that they do not play with the appliance.

DO NOT OPERATE THE UNIT IF DAMAGED.

Model:VMFIL100, VMFIL150, VMFIL200, In-line Exhaust Fan

(f)

(d)

(e)

(g)

(h)

(j)

(k)

And

Duct work connection should be made with duct tape or duct fast-clamps

(available through your local distributor hardware retail store) to ensure

a good seal and secure connection.

INSTALLATION-Applications,Recommendations&Wiring

Installation tips:

Figure 1.Typical Appliations

:Model:VMFIL series

Multi-Point Exhaust System

Note:Please pay attention to the Air Direction when replacing the motor

wheel assembly.

4.Prepare the electrical wiring connection.Please refer to ELECTRICAL

CONNECTION section of this manual for wiring diagram.(Step 9-12

diagram below).

To start the installation the motor wheel assembly must first be removed,

loosening the two spring clips around the casing and remove.

(Step 1-3 diagram below).

2.Secure the mounting bracket fan flange assembly to a fixed structure.

(Step 4-5 diagram below).

3.Replace the fan motor wheel assembly and tighten the two spring clips

to secure the product.(Step 6-8 diagram below).

Warning:All electrical connections and disconnections must be

performed by a Licensed Electrician.

Wiring diagram

Warning:For your safety,all electrical work must be carried out by a

licensed electrcian.All electrical wiring must be in accordance with

latest national wiring rules AS/NZS 3000.

Warning:Ensure the power supply to the exhaust fan is switched OFF

before carrying out any installation and maintenance

Note:A double switch must be included in the electrical wiring of the

exhaust fan.

IMPORTANT:An additional all pole diconnection switch MUST be

cluded in the fixed wiring to provide isolation for maintenance.in

MAINTENANCE

IMPORTANT:BEFORE CARRYING OUT ANY MAINTENANCE OR

SERVICING,ENSURE THE UNIT IS DISCONNECTED FROM THE

MAIN ELECTRICAL SUPPLY.

This exhaust fan incorporates fully sealed bearings and therefore does

not require any lubrication .We would recommend inspection of the

product at least once every twelve(12) months to avoid the excessive

accumulation of dust and dirt on the inpeller.

To inspect the unit disconnect from electrical supply and remove from

ducting.lf any debris is evident on the impeller clean with a damp(not wet)

cloth.DO NOT USE any detergents or abrasive materials for cleaning.

Electrical

Max.Air Flow

Rate (H-L):

VMFIL200

VMFIL150

VMFIL100

130Watts50Watts30Watts

852/753m /h

561/438m /h

240/190m /h

This manual suits for next models

Table of contents

Other Ventair Fan manuals

Ventair

Ventair ROYALE DC Series User manual

Ventair

Ventair Z564EXTSS User manual

Ventair

Ventair PRO-V Slimline VSLF100 Assembly instructions

Ventair

Ventair WAL75-DC User manual

Ventair

Ventair GLA1203WH User manual

Ventair

Ventair GYRO 200 Installation guide

Ventair

Ventair Brook 4 Installation guide

Ventair

Ventair MANROSE SIERRA MR2DXWH User manual

Ventair

Ventair GYRO 250 Installation guide

Ventair

Ventair MALIBU MAL1404WH User manual

Ventair

Ventair VWF150AS Assembly instructions

Ventair

Ventair STANZA STA1203WH-LR User manual

Ventair

Ventair SPINIKA Series User manual

Ventair

Ventair PRO-V PVPX200WH User manual

Ventair

Ventair DC 3 Series User manual

Ventair

Ventair SPYDA SPY903NWH User manual

Ventair

Ventair WAL45-DC User manual

Ventair

Ventair FAN0530 User manual

Ventair

Ventair Orbital 45 User manual

Ventair

Ventair MALIBU Series User manual

Ventair

Ventair HARMONY II Series User manual

Ventair

Ventair Stanza STA1203WH User manual

Ventair

Ventair SPYDAEC SPYEC1253WH User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual