Varytec LED Phantom User manual
User’s manual
LED Phantom
2 / 7
Table of content
1. Safety instructions........................................................................................................................... 3
2. Introduction..................................................................................................................................... 4
3. Product Overview............................................................................................................................ 4
4. Setup............................................................................................................................................... 4
4.1. Fuse Replacement................................................................................................................. 4
4.2. Mounting................................................................................................................................. 5
5. Operating Instructions..................................................................................................................... 5
5.1. Operation modes.................................................................................................................... 5
5.2. Technical data........................................................................................................................ 6
3 / 7
1. Safety instructions
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperatureAvoid exposing it
to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a
danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the player for an extended period of time
be sure to disconnect the plug from the receptacle.
4 / 7
2. Introduction
- Simulated rippling water effect
- 4 constantly changing dichroic colors
- Stop effect on a color
- Adjustable ripple speed
- High-power, 22W (1,360mA) LED
- Additional power output: max 100 units @ 240V
3. Product Overview
4. Setup
4.1. Fuse Replacement
Disconnect the power cord before replacing a fuse and always replace with the
same type of fuse.
With a flat head screwdriver, wedge the fuse holder out of its housing. Remove the blown fuse from its
holder and replace with the exact same type of fuse. Insert the fuse holder back in its place and
reconnect power.
5 / 7
4.2. Mounting
This fixture may be mounted in any safe position.
It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O”
type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding
the desired position, retighten both knobs.
- When selecting an installation location, consider ease of access to the unit for operation and
routine maintenance.
- Always use safety cables.
- Never mount the unit in places where it may be exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.
5. Operating Instructions
5.1. Operation modes
The unit operates in standalone mode. There is an on/off switch for the color rotation, as well as a
rotation speed adjustment for the water effect
Note! The on/off switch is only for color rotation. It will not turn the off the fixture.
Note! At higher rotation speeds, the operation noise may increase from the fixture. This is
normal.
6 / 7
5.2. Technical data
7 / 7
Importeur:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
Table of contents
Other Varytec Dj Equipment manuals
Varytec
Varytec COMPLEX User manual
Varytec
Varytec Studio Par Mini User manual
Varytec
Varytec LED PAR 64 User manual
Varytec
Varytec BAT.PARset 4 RGBW User manual
Varytec
Varytec LED PAR 14x8W User manual
Varytec
Varytec Event Par IP65 4in1 14x8W User manual
Varytec
Varytec Hero Spot Wash 140 2in1 RGBW+W User manual
Varytec
Varytec Hero Spot Wash 140 WH 2in1 User manual
Varytec
Varytec Street Bar MK3 User manual
Varytec
Varytec SuperClam RGB User manual
Varytec
Varytec LED Ball BAT 30 RGBW User manual
Varytec
Varytec LED Pad Bar Compact ST RGB User manual
Varytec
Varytec LED Typhoon PAR Outoor User manual
Varytec
Varytec Rainbow Bar 9 User manual
Varytec
Varytec LED PAR XS 7X15W RGBW IP65 User manual
Varytec
Varytec Strobe Mini LED20 User manual
Varytec
Varytec MULTIEYES User manual
Varytec
Varytec Easy Move XS HP Wash User manual
Varytec
Varytec LPS 20 User manual
Varytec
Varytec LED Pad 7 User manual
