Valley Electronics daysy User manual
Development, Manufacturing,
Worldwide Distribution
Valley Electronics AG
Marienstrasse 16
8003 Zürich, Switzerland
Tel: +41 44 577 68 69
Fax: +41 44 577 68 70
www.daysy.me
Contact your local distributor for assistance and support.
Instructions
for use.
What do the indicators mean?
Check out www.daysy.me/tutorials to see videos of how to use Daysy.
fertile
learning/
fluctuation
infertile
pregnant
A blinking violet light means Daysy is expecting
your period. To confirm, hold down the button for
2 seconds.
A solid violet light means you have confirmed your
period. If you confirmed menstruation by mistake,
you can hold down the button for 2 seconds.
Rotating blue lights mean a measurement is taking
place. Hold down the button for 2 seconds if you
want to cancel.
pre-ovulatory phase
INFERTILE FERTILE HIGHLY
FERTILE
INFERTILE
post-ovulatory phase
estrogen phase
progesteron phase
low level
high level
increase by
primary follicle blister follicle follicle ready to rupture egg cell produce increasing
amount of progesterone
dries up
ripening of the follicle
ruptured follicle develops into corpus luteum
OVULATION
menstruation gradual rebuilding of the mucus lining of the womb
FERTILITY
THE OVARY
IN THE BLOOD
TEMPERATURE
progesteron
estrogen
OVULATION
fertility chart - full chart
Daysy has an App.
daysyView will give you valuable information
about your menstrual cycle. You also have the option
to share information with your partner.
© Valley Electronics AG, Zurich. All rights reserved, 2016-08-19.
*Daysy is a registered trademark of Valley Electronics AG.
3
Our experience over more than 30 years in the monitoring of the female
cycle has enabled us to develop this sophisticated and reliable fertility
monitor. Daysy, a fertility monitor at its best. Understand your cycle and
change your life. Do you have any questions or would like to get more
information about Daysy? Then visit our website daysy.me or get in touch
with our customer service. You can view instructional videos online at:
daysy.me/tutorials
We wish you a successful start.
Congratulations on
your Daysy®
, the latest fertility
monitor on the market.
4 5
With Daysy you measure your waking temperature under the tongue every
morning. Daysy’s algorithm calculates your fertility based on the digitally
measured temperature data. Daysy is 99.3% safe from the first measurement
on. In addition to your daily temperature measurement, Daysy will ask you to
enter the days you are menstruating. Daysy also has an App (daysyView) that
gives you additional information about your cycle. You can download
daysyView from your App Store or on our website daysy.me.
– Please read this manual before you start using Daysy. Additional
information about Daysy can be found at daysy.me.
– Please stop taking hormonal contraceptives before starting with Daysy.
–
Daysy does not provide protection against sexually transmitted diseases in any way.
– Daysy can only be used by women with menstrual cycles lasting
between 19 – 40 days.
– Daysy is not suitable if you are experiencing symptoms of menopause, taking
hormonal treatments or using hormonal birth control.
– Daysy may be less effective in identifying fertile days if you experience
irregular menstrual cycles.
– Only remove/replace the battery when Daysy is switched OFF.
Included:
– Coin Cell Battery (CR2032)
– TRRS Audio Cable
– Sensor protection cap
About Daysy. Precautions.
6 7
Battery
1. Place the supplied battery into the
battery compartment with the “+”
sign facing you. Close the battery
cover with a coin by rotating the
cover clockwise.
2. Daysy will now start a self-test:
All the lights will come on once.
3. Daysy turns off auto-
matically after 30 seconds.
4. You can switch Daysy ON by
briefly pressing her activation
button.
Battery
compartment
Connector
Battery cover
Insert the
coin here
*You can find the different fertility indicators on the cover page
Indicators and their meaning.*
First things first: the battery.
Cap
Sensor
Activation button
Activation ring (blue)
Menstruation indicator (violet)
Learning phase/
cycle fluctuation (yellow)
Infertile (green)
Fertile (red)
8 9
When the violet light «menstruation» is blinking, Daysy is asking for your
menstruation.
– If you are menstruating, press and hold the activation button until the
violet light remains illuminated and you hear a beep. Confirm menstruation
for each day that you have it for at least 3 consecutive days.
– If you are not menstruating, don’t do anything, the light will remain blinking.
– If you are menstruating and Daysy does not ask you, input menstruation
by pressing and holding down the activation button until the violet light
is illuminated.
1. Every morning - before you get out of bed - pick up Daysy and briefly
press the activation button. The activation ring will light up quickly, and
your predicted fertility status will be displayed.
2. Press the button once more, and the lights of the activation ring will start
rotating clockwise. The measurement can begin.
3. Place the sensor tip under your tongue, as far back as possible to the left
or right, and close your mouth.
4. 2 beeps will mark the end of your measurement.*
5. After measuring, the fertility status displayed is valid for a maximum of 24
hours or until the next measurement in the morning. 18 hours after the last
measurement, Daysy will switch to the prognosis. You can review your
fertility status later in the day by pressing the activation button once.
*If you hear a grumble buzz the measurement was
not successful and you must take your temperature again.
How to Use. Inputting menstruation.
Important: The first bleeding after stopping hormonal contraceptives is not a menstruation,
but a hormone-conditioned withdrawal bleeding. Do not enter menstruation for this bleeding.
10 11
– Be sure to measure first thing in the morning, before getting out of bed.
If you already got out of bed and then remember, skip the measurement
for that day.
– Be sure to input when you have your period.
– The more regularly you measure, the more quickly Daysy can learn your cycle.
– In the beginning, you will see a lot of yellow and red. Daysy has to get to
know you first and she requires about 3 - 4 measured cycles for this. We
know this can be frustrating, but please be patient. Once Daysy knows
your cycle, your patience will be rewarded.
Clean Daysy carefully with a damp cloth. Alcohol and soap can be used in
small amounts. Take care that Daysy does not come into contact with too
much liquid, as she is not waterproof.
The supplied battery lasts approximately 2 years. If the battery is nearly
empty, Daysy’s activation ring will blink frantically. Please change the
battery within 2 days, so your fertility calculations will not be affected. If
the battery depletes completely, Daysy will have to relearn where you are
in your current cycle.
Note: Be sure Daysy is “OFF” before removing/replacing her battery.
Important. Cleaning.
Battery.
12 13
Problems and troubleshooting.
Daysy gives many yellow days.
– Daysy needs some time to get to know your cycle. During the first 3 to 4
cycles Daysy has to get to know you and gives you many days of yellow and
red. The more regularly you measure every morning, the faster Daysy gets to
know you.
– If you have a lot of yellow days after you have already been measuring
a long time, it means that you have fluctuations in your cycle. This is
completely normal. Not every woman always ovulates on the same day
in the cycle, and the period sometimes comes sooner or later.
Daysy does not react when the activation button is pressed.
Please contact customer service before removing the battery.
Daysy’s activation ring blinks blue frantically.
Be sure Daysy is off, then replace the battery.
Daysy does not start measuring, but grumble buzzes instead.
Remove the cable before measuring. Please always remove the cable after
each synchronization, while Daysy is still switched on.
For further information, please visit our website’s FAQ section at daysy.me or contact
our customer care department.
14 15
Daysy ends the measurement with a grumble buzz instead
of beep-beep.
The measurement timed out and was aborted or the measurement
was not successful. Try to follow these tips:
– Place the sensor tip under your tongue, as far back as possible
to the left or right.
– Close your mouth.
– After starting a measurement, do not take Daysy out of your mouth
until you hear a beep-beep.
– If you have a fever, Daysy may not accept the measurement.
Please skip the measurementsduring illness.
After inserting the battery the red indicator and the activation
ring are blinking frantically.
Something is wrong with Daysy. Please contact our customer care department.
I am not going to use Daysy in the coming months. What do I need to do?
If you plan not to use Daysy for an extended period of time, clean her,
remove the battery and store Daysy in a dry and cool place.
How does Daysy speak to me?
– Beep-Beep: Daysy is happy. The measurement was a success.
– Grumble buzz: Daysy is not happy. The measurement was not successful.
– Beep: Daysy beeps when you press the activation button.
For further questions regarding use, please visit our website’s FAQ section at daysy.me
or contact our customer care department.
Intended use: Daysy is a battery-operated fertility monitor intended for
measuring daily basal body temperature. Daysy can be used by women to
detect their fertile window. The fertility status is indicated via an optical
display.
Significant performance characteristics: Measurement of basal body
temperature, evaluation and display of fertility status.
Technical data.
16 17
Indications: Daysy fertility monitor can be used by women with regular
menstrual cycles with a length between 19 and 40 days.
Contraindications:
– You have a medical condition that makes becoming pregnant
dangerous - such as high or low blood pressure or a heart condition.
– There could potentially be a health risk to the baby if you got pregnant,
for example, if you are dependent on drugs or alcohol, or taking
medications known to cause birth defects.
– You are experiencing symptoms of menopause, or taking hormonal
treatments or birth control hormones.
– You are having irregular periods so predicting your fertile time may
be hard or impossible.
Indications /Contraindications.
Other manuals for daysy
3
Table of contents
Other Valley Electronics Personal Care Product manuals
Valley Electronics
Valley Electronics Lady-Comp User manual
Valley Electronics
Valley Electronics Teena User manual
Valley Electronics
Valley Electronics Lady-Comp User manual
Valley Electronics
Valley Electronics daysy User manual
Valley Electronics
Valley Electronics Lady-Comp User manual
Valley Electronics
Valley Electronics Lady-Comp User manual
Valley Electronics
Valley Electronics daysy User manual
Valley Electronics
Valley Electronics Lady-Comp Pearly User manual
Valley Electronics
Valley Electronics Lady-Comp User manual
Valley Electronics
Valley Electronics Lady-Comp User manual
