3
DESCRIPTION AND ASSEMBLY
A - Motor block.
B - Switch.
C - Float: its purpose is to avoid that liquid may goes inside
motor block during suction.
D - HEPA lter to set into the tank to pick up dust
(remove for liquid suction).
E - Hooks for tightening of motor block to tank.
F - Suction inlet.
G - Tank.
H - Flexible anti-static hose.
I - Tube.
L - Wet tool.
M - Round brush.
N - Flat lance.
O - Filter bag (on request) to t directly on the suction
inlet. Its use does not exclude the use of the HEPA
lter that has to be tted.
P - Small brush.
Q - Aspirmatic double use brush.
R - Wand.
ATTENTION: In order to keep the machine in good
working order it is recommended to clean the HEPA
lter after each use.
OPERATING INSTRUCTION
- Insert the HEPA lter in the tank (Fig. 1).
- Assembly the head on tank and block it by hooks (Fig. 3)
- Connect the exible anti-static hose into the inlet
(Fig. 4).
- Connect the wand and the extensions to other side of
exible hose (Fig. 5).
- Select the most suitable accessory (Fig. 6).
- Connect the plug to power socket then switch on the
equipment (Fig. 7).
- Example of use of at lance (Fig. 8).
- Example of use of small tool (Fig. 9).
- Example of use of brush on the oor (Fig. 11).
- Example of use of brush on the carpet (Fig. 12).
- Example of use of round brush (Fig. 10).
- If a lter bag is provided, insert it in the tank on the
deector (Fig. 14).
LIQUID SUCTION / OPERATING INSTRUCTION
- Remove the HEPA lter and bag (Fig. 2).
- Assemble the head on tank and lock it by hooks (Fig.
3)
- Connect the exible hose to the inlet (Fig. 4).
- Connect the extension to other side of exible anti-
static hose (Fig. 5)
- Connect the wet tool (Fig. 6).
- Connect the plug to power socket then switch on the
equipment (Fig.7)
INDICATIONS TO BE SCRUPULOUSLY ADHERED TO
• Thisapparatusisnottobeusedbypeople(childrenincluded)with
reduced physical, sensorial or mental capacities or without any
experience and knowledge, unless they did not receive instructions
relative to the use of the apparatus and are controlled by a person
responsible for their safety.
• Childrenshouldbecontrolledsothattheydidn’tplaywiththe
apparatus.
• Thepackagingcomponentscouldconstitutepotentialdangers(asfor
exampleplasticbags):theymustbekeptawayfromchildren’sreach
and from other people or animal not conscious of their actions.
• Anydierentusefromthatindicatedinthismanualcould
constitute a danger, therefore, it must be avoided.
• Everypartoftheapparatusmustbecorrectlyassembled
before using it. Verify, furthermore, that the ltering elements
(as for example lter bag, HEPA cartridge etc) have been
correctly and eciently assembled.
• Ensurethatthesocketconformstotheapparatus’plug.
• Ensurethatthevoltageindicatedonthemotorblockcor-
responds with the power that is intended to connect the
apparatus to.
• Avoidpositioningthesuctionaperturenexttodelicate
parts of the body such as eyes, mouth, ear, etc., while the
apparatus is functioning.
• Ensurethattheoater,thathasthefunctiontostopthe
suction when the keg is completely lled with liquid or in
case of tipping over, does not show any damages or clogging
that might prevent the suction. Regularly clean the oater
(water level limiting device) according to the instructions
and control for any damage signs.
• ATTENTION:donotsuckinammablesubstances(ashes
from re-place), explosive, toxic or dangerous to the health.
• ATTENTION:useonlythebrushessuppliedwiththeapparatus
or those specied in the instruction manual. Using other
brushes could jeopardise safety.
• ATTENTION:don’tleavetheapparatusunattendedwhileis
in function.
• ATTENTION:incaseoffoamorliquiddischargeswitcho
immediately.
• ATTENTION:incaseoftippingover,lifttheapparatusbefoer
switchingo.
• Donotaspierwaterfromcontainers,sinks,basinsetc.
• Donotaspireaggresivedetergentsbecuasetheycould
damage the apparatus.
• Donotaspirematerialsthatcoulddamagethefiltering
elements (such as glass, metal etc).
• Donotimmergetheapparatusintowaterandneitheruse
water jets to clean it.
• Alwaysremovetheplugfromthecurrentsocketbefore
undertaking any type of intervention on the apparatus or it
is left unatteneded or within children or peoples reach not
quite conscious of their own actions.
• Regularlycontrolthefeedingcablelookingfordamages,
cracks or ageing. Substitute the cable before using it further.
• Ifthefeedingcableisdamageditmustbesubsitutedbythe
manufacturer or by its after sales service or in any case by
a siimilarly qualied person, thus preventing any possible
risk.
• Whenusingextensionelectricwiresensurethattheyare
lying on dry surfaces and protected against possible water
jets.
• Specialisedpersonnelmustalwayscarryoutmaintenanceand
repairs, any dmaged part must be substitued with original
spare parts.
• ATTENTION:itisforbiddentocarryoutchangestothe
apparatus. Tampering could cause res and damages even
lethal to the user and the forfeiture of the guarantee.
• Themanufacturerdeclinesanyrespnosibiltyfordamages
caused to people or things due to non-compliance with
these instructions or if the apparatus is unreasonably used.
• ATTENTION:iftheanti-statichoserequiresreplacement
contact Vaclensa on 0161 728 1800.
