V-tech VSP600 User manual

How to configure Vtech VSP600 Cordless Phone:

To begin configuring your Vtech for use on Intermedia’s Network, you will need to pull up the graphical

user interface.

Obtain the Credentials for the device in HostPilot:

1. Login to HostPilot.

2. Navigate to Services>Voice Services.

3. Choose Numbers&Extensions Tab.

4. Click on the phone number of the device.

5. Navigate to SIP configuration

To Pull the IP of the phone, there are two ways:

On the phone:

1. Press the Softkey button for Menu on the phone

2. Scroll down to ‘Status’ and hit the Center button [Select]

3. Press [Select] for ‘Network’ or press the [Enter] soft key

4. The IP of the phone should now be displayed

Via Netscan:

1. Run Netscan

2. Find the MAC of the phone in the scan and look at the associated IP

Once you find the IP address, input that into any Web Browser, you will be met with a login pop-up.

The default credentials are: admin/admin (after factory reset, username and password are user/user)

At this point we’re ready to configure this SIP phone.

1. Click on System across the horizontal Black bar

Click on ‘Account 1’ under SIP Account Management on the left-hand Pane.

Fill out the following information:

General Account Settings:

Toggle ‘Enable Account’ On

Display name: (Optional)

User identifier: [EXT]

Authentication name: [SIP User Name In HostPilot]

Authentication password: [SIP Password In HostPilot]

Leave the rest as default

SIP Server:

Server Address: [SIP Domain In Host Pilot]

Port: [In Host Pilot]

Registration:

Server Address: [Same as SIP server address]

Port: [Same as SIP server port]

Expiration (secs): 300

Registration Frez (secs): 300

Outbound Proxy:

Server Address: [Outbound Proxy In Host Pilot –Same as SIP server address]

Port: [Same as SIP server port]

Backup Outbound Proxy

Server Address: [Outbound Proxy In Host Pilot –Same as SIP server address]

Port: [Same as SIP server port]

Audio:

Codec Priority 1: [Preferred Codec In Host Pilot]

Codec Priority 2: [Secondary Codec In Host Pilot]

Mark ‘None’ for the rest of the Codec Priorities

Signaling Settings:

Local SIP port: 6xxx –(xxx = The ext #. Our example shows 6225 for Ext 225)

Transport: UDP

Voicemail Settings:

Mailbox ID: [EXT]

Expiration (secs): 300

NAT Traversal

Toggle ON ‘Enable UDP Keep-Alive’

Keep-alive interval (secs): 300

Hit ‘SAVE’ at the bottom

2. Under System, click on ‘Signaling’ on the left-hand panel

Voice:

Min Local RTP port: 30000

Max Local RTP port: 50000

NAT Traversal

Min Public RTP Port: 30000

Max Public RTP Port: 50000

Hit ‘Save’

3. Your phone may have an incorrect time even though the HostPilot may indicate the correct time

zone for this particular device.

To correct this:

Go to the ‘Servicing’Tab

Click on ‘Time and Date’ on the left-hand panel

Network Time Settings:

Ensure ‘Enable Network Time’ is toggled ON

NTP Server: us.pool.ntp.org

Time Zone and Daylight Savings Settings:

Adjust Time Zone: [Depends on location]

If applicable, toggle ON ‘Automatically adjust clock for Daylight Savings’

Manual Time Settings:

Date Format: (User Preference)

Time Format: (Adjust Accordingly)

Hit Save, then hit Apply

4. We can change the name under System and Handset Name.

For Handset 1, you can

This is the Phone Display name.

5. If you have multiple handsets, you would need to register the second account [Account 2] and

adjust them accordingly

Go to System > Account Assignments

Ensure Account 1 is only checked for Handset 1. The Default account should be ‘Account 1’

For Handset 2, we should have Account 2 only checked and the Default should be ‘Account

2’

Refer to picture below:

6. Lastly, we should reboot the phone.

Click on the ‘Servicing’ Tab across the horizontal black bar

Click on Reboot

Note: It may take a few minutes for phone to come back into operation after applying

settings.

The Line should now be registered under Status then System Status.

‘Account 1’ should show registered now.

Other manuals for VSP600

Other V-tech Cordless Telephone manuals

V-tech

V-tech vt1733 User manual

V-tech

V-tech LS6185 User manual

V-tech

V-tech I5808 - Cordless Extension Handset User manual

V-tech

V-tech DS6511 User manual

V-tech

V-tech gz 2334 User guide

V-tech

V-tech 2498 - VT Cordless Phone User manual

V-tech

V-tech MI6821 - Cordless Telephone With Caller Id User guide

V-tech

V-tech vz2621 Instruction Manual

V-tech

V-tech CS6829 User manual

V-tech

V-tech CS6120-2 User manual

V-tech

V-tech CS6419-2 User manual

V-tech

V-tech i6767 - 5.8 Digital GHz Two Handset Cordless Phone... User manual

V-tech

V-tech S6120-2 User manual

V-tech

V-tech DS6621 User manual

V-tech

V-tech BS5872 User manual

V-tech

V-tech ES2210-2A User manual

V-tech

V-tech gz2339 User manual

V-tech

V-tech vt1970 User manual

V-tech

V-tech DS3101 User manual

V-tech

V-tech MI6821 - Cordless Telephone With Caller Id User manual

V-tech

V-tech I 5858 User manual

V-tech

V-tech CS6114-11 User manual

V-tech

V-tech CS6858-33 User manual

V-tech

V-tech TR1-2013 User manual

Popular Cordless Telephone manuals by other brands

3Com

3Com NBX Guide

Panasonic

Panasonic KX-TGK210HK operating instructions

Panasonic

Panasonic KX-TCA181EX installation manual

BT FREESTYLE 3200 user guide

AT&T

AT&T CL84102 user manual

BREZZICNI

BREZZICNI CL-3622 user manual

Panasonic

Panasonic KX-TG1831NZ operating instructions

Panasonic

Panasonic KX-TG7301E operating instructions

Furuno

Furuno FM-4721 Brochure & specs

Sanyo

Sanyo CLT-J70 instruction manual

Amplicomms

Amplicomms BigTel 201 user manual

GE 26992 user guide

AT&T

AT&T E1812B user manual

Sanyo

Sanyo CLT-670 instruction manual

GE 15432970 user guide

Curtis

Curtis TC595 owner's manual

Gigaset

Gigaset Gigaset 3000 Micro operating instructions

Poly

Poly VVX D230 Quick start user guide