V-tech GEMINI User manual

vtech GEMINI

Display and keypad

Display and symbols

The handset display provides easy to understand information on the current status of your telephone. The 4-line display (with

backlight illumination) is capable of showing several graphical symbols and text lines. The meaning of the symbols shown in the

upper part of the display is as follows:

............ This antenna symbol is permanently lit if a radio connection

between handset and base station exists. A blinking symbol shows

that the handset is almost outside of the range of the corresponding

base station.

.......... You have pressed the talk key.

.. ....... Indicates that the handset is logged on to base station A, B, C or D.

Upon delivery the handset is logged on to base station A. Refer to

page 48 for more information on selecting another base station.

.......... The keypad has been locked („key lock“).

.......... One or more new SMS1text message have been received.

........ The ring tone has been switched off („do not disturb“). Incoming

calls are signalled by a short beep.

........... The microphone is switched off („mute“).

........ Indicates charge status of the battery (refer to page Error!

Bookmark not defined. for more information).

Name and number of the handset. You can operate up to 5

handsets on the same base station. This allows you to make

internal calls between handsets free of charge!

•

1Ask your service provider about the availability and any charges for this service.

Handset front view

Handset keypad

The following illustrations represent the keys on the handset keypad. For each key a short description is provided.

...

Softkeys (left and right) which corresponding to different functions as

displayed on the screen.

The navigation keys have different functions:

⇒ While in a standby: open the redial list.

⇒ While in a menu: scroll up or down.

⇒ During a call: change the volume.

This C (cancel)-key has different functions:

⇒ While in a menu: press to quit the (sub) menu

⇒ Press for 2 seconds to return to the standby mode.

⇒ During a call: press to switch off the microphone (mute).

Open the phonebook.

Talk key. Corresponds to “lift/replace receiver” on a conventional

telephone.

Handsfree / speakerphone: switch the loudspeaker on/off. When the

loudspeaker is on, this key is illuminated.

Message key. This key blinks when one or more new messages have

been received. Press this key to open the message list.

Display with

ackligh

Cancel ke

Phonebook key

Talk ke

Microphone

VIP phonebook

Soft key

avigation keys

EARPIECE

(ADDITIONAL

LOUDSPEAKER IS

LOCATED AT THE

Message key

(illuminated)

Soft ke

R-ke

Hands-free key

(illuminated)

INTERN 1

17.01

20:53

umber pa

vtech GEMINI

Numerical keys for entering telephone numbers as well as text.

• When pressing the 1-key for approx. 2 seconds (long-press), the

network mailbox number is dialled directly.

• In dialling mode, when pressing the 0-key for approx. 2 seconds

(long-press), a dialling pause is inserted between digits

Asterisk (or star) key to enter the “asterisk” symbol. Pressing this key

and holding it for approx. 2 seconds switches the ring tone on/off. While

editing names or writing text, pressing this key switches between

uppercase and lowercase characters.

Hash (or pound) key to enter the “hash” symbol.

Pressing this key and holding it for approx. 2 seconds locks/unlocks the

keypad.

Open the VIP phonebook.

R – or Flash key.

Base station front view

The vtech GEMINI base station is equipped with a multi-functional paging key used for finding (paging) the handset(s) (see below)

and registering handsets on to the base station (refer to page 11).

Finding the handset (paging)

You can easily find a (misplaced) handset by pressing the paging key on the base station. All handsets which are logged on to this

base station will start ringing for 60 seconds enabling you to quickly find the handset(s) again.

Stop the ring tone on the handset by pressing the talk key .

Note A handset will not start ringing if the handset is not registered to the base

station. For more information how to register the handset to the base station

refer to page 11. The handset will not ring if switched off or the batteries are

flat.

Paging ke

Charging cradle

for the handse

Table of contents

Other V-tech Cordless Telephone manuals

V-tech

V-tech DS6641 User manual

V-tech

V-tech gz 2436 User guide

V-tech

V-tech LS6205 - Cordless Extension Handset User manual

V-tech

V-tech 6032 User manual

V-tech

V-tech DS6621 User manual

V-tech

V-tech t2326 User manual

V-tech

V-tech LS6245 User manual

V-tech

V-tech 6052 User manual

V-tech

V-tech mi6890 Setup guide

V-tech

V-tech CS6719 User manual

V-tech

V-tech vt20-2480 User manual

V-tech

V-tech VT1047 User manual

V-tech

V-tech CS5111-2 User manual

V-tech

V-tech 80-5735-00 - V-Tech VT5823 5.8GHz Cordless... User manual

V-tech

V-tech CS6629-3 User manual

V-tech

V-tech CS6948-3 User manual

V-tech

V-tech CS6124 User manual

V-tech

V-tech GZ2456 - VMix Cordless Phone User manual

V-tech

V-tech vt2423 User manual

V-tech

V-tech VC7151-102A User manual

V-tech

V-tech ev 2650 User manual

V-tech

V-tech CS6199-4 User manual

V-tech

V-tech IP 811 User manual

V-tech

V-tech mi6820 - 5.8 GHz Handset User manual

Popular Cordless Telephone manuals by other brands

3Com

3Com NBX Guide

Panasonic

Panasonic KX-TGK210HK operating instructions

Panasonic

Panasonic KX-TCA181EX installation manual

BT FREESTYLE 3200 user guide

AT&T

AT&T CL84102 user manual

BREZZICNI

BREZZICNI CL-3622 user manual

Panasonic

Panasonic KX-TG1831NZ operating instructions

Panasonic

Panasonic KX-TG7301E operating instructions

Furuno

Furuno FM-4721 Brochure & specs

Sanyo

Sanyo CLT-J70 instruction manual

Amplicomms

Amplicomms BigTel 201 user manual

GE 26992 user guide

AT&T

AT&T E1812B user manual

Sanyo

Sanyo CLT-670 instruction manual

GE 15432970 user guide

Curtis

Curtis TC595 owner's manual

Gigaset

Gigaset Gigaset 3000 Micro operating instructions

Poly

Poly VVX D230 Quick start user guide