USSPA VIBES Quick start guide
VIBES Your daily good vibes full instructions
Installation, use and
maintenance instructions
VIBES Your daily good vibes
3
01 Introduction
Your spa
Momento Natura Soula Lucky
Contract number
Spa serial number
Date of putting into service
Contacts
Your service technician
Service line
Orders of chemical products and accessories
01 Introduction
Congratulations on purchasing your new VIBES spa - the hydrotherapeu-
tic equipment that offers everyday relaxation, hydrotherapy and plesant
moments.
Your new VIBES spa is manufactured from first-class materials
and components from leading global producers to guarantee easy
operation and offer pleasure for many years.
The purpose of this manual is to provide you with information on how to
make the best use of your spa. With proper care and regular maintenance,
your spa will become a place of untroubled relaxation.
Gecko®, and their respective logos are registered trademarks of the company Gecko Alliance
Group. in.ye™, in.touch™, in.k1000™ and their respective logos are registered trademarks of
the company Gecko Alliance Group.
All products or company names mentioned in this publication are trade names,
trademarks, or registered trademarks of their respective owners.
4
VIBES Your daily good vibes 02 Important information
02 Important information
for spa users
The design of your VIBES spa meets the highest requirements for this
type of equipment. However some basic rules should be observed for
using the spa without problems for long time:
1. When the spa is out of operation, keep the appliance covered
with the cover that is supplied as a standard feature. The cover
not only makes the operation of the spa economical and effective
(preventing heat and humidity from escaping) but also contributes
considerably to maintaining the water quality in the spa. At the
same time, it protects the surface of the spa against any long-
term action of UV light and high temperatures which could result
in degrading of the material that the spa is produced from. The
warranty does not extend this kind of damage.
2. The spa equipment is designed to hold water permanently.
Therefore, it is recommended to have the spa filled with water
at all times, even when not being used for a longer period of time.
3. Do not turn on the power until the spa is filled with the correct
amount of water. Turning on the power automatically starts
important components such as controls, heating, and other systems.
Starting these components when there is an insufficient water
volume inside the spa may result in damage to them that is not
covered under the warranty.
4. The device is not intended for use in commercial or public premises
(hotels, guest houses, etc.). In the case of such use, it is up to the
purchaser to ascertain the applicable standards regarding the
installation and use of the spa in such operation, as local laws
and standards vary from location to location.
5. Please keep the manual including all attachments ready
for reference.
6. The equipment meets all government standards (European
guidelines) plus national and technical specifications. The conformity
certificate is available upon request.
7. The manufacturer reserves the right to make changes to the
equipment.
VIBES Your daily good vibes
5
03 Spa safe operation rules
The spa offers a lot of pleasure and fun, but its use is associated with
considerable responsibility. Never forget to observe safety rules when using
the spa. Below, there are the basic principles for safe spa use. Failure
to follow the listed rules below may result in damage, injury, or fatal injury.
It is your responsibility to ensure that you and your family and guests use
the spa in an appropriate and reasonable manner.
1. Please read this manual thoroughly before using the spa. Conduct
regular visual inspections of the spa. If you find any defect contact
your service technician for advice or repair.
2. The spa connection must be made by a person (electrician) with
a valid authorization, always using a residual current circuit breaker
I∆n = 0.03 A. It is recommended to test the residual current circuit
breaker before use.
3. Any extension or disconnection of the power supply cable from the
switchboard can lead to the termination of the spa guarantee in case of
improper intervention.
4. The use of electrical appliances in the spa is prohibited. The electrical
devices should always be located at least 2 meters from the spa.
5. If possible, use only battery-powered devices in the vicinity of the spa.
6. Never interfere in the inspect the spa equipment or the filtration
equipment without disconnecting the power supply and reducing
the inner pressure.
7. Always avoid the risk of spa overflowing. Defects caused by overflowing
are not covered by the warranty.
8. Check the water temperature prior and during the bath use. It is
recommended to use an independent thermometer; a failure of the
temperature sensor cannot be excluded 100%.
9. Always step into and out of the spa slowly and carefully, as wet surfaces
can cause injury.
10. The most advisable method of entering a spa installed in a cabinet
on the floor is as follows: Sit down on the edge of the spa and turn
carefully, placing your legs one after another into the water. After that,
lower yourself into spa, holding on to the edge. Do the reverse to get
out of the spa. It is recommended to use a non-slip pad to step on
when sitting on the edge and turning out of the spa. If your spa is
embedded in the floor, special handles or a rail attached to the wall
at the spa should be used to hold on to safely when stepping
in and out of spa.
03 Rules
6
VIBES Your daily good vibes
11. Use only unbreakable cups, dishes and utensils in the vicinity of the spa.
Try to prevent accidents and injuries.
12. Never use the spa all by yourself.
13. Always pay extra attention to children around and inside the spa.
Children should use the spa only in the presence of an adult.
14. Make sure that no one is running near the spa and that there are no
disturbances.
15. It is recommended to appoint one person to have responsibility for the
spa supervision.
16. When the pumps are running, all suction and skimmer must remain
free; avoid the risk of sucking any part of the body into the suction,
skimmer.
17. Avoid inserting your fingers into the jet holes, as your fingers may be
caught accidentally.
18. The temperature of the spa water should not exceed 40°C for health
reasons. The recommended temperature for use should be above body
temperature, i.e. between 37 and 40°C.
19. People with heart conditions, diabetics, people with high or low blood
pressure or other serious illnesses and pregnant women should not
enter the spa without first consulting their physician. In such cases, it
is recommended to have a water temperature of 36°C or lower (below
body temperature).
20. Too long stay in the spa or too high water temperature can cause
the body to overheat - hyperthermia. This is manifested for instance
by sweating, headaches, dizziness, dry mouth and throat, increased
pulse, irregular breathing. In such cases, it is recommended to
place the weakened person on his/her back, cooling him/her with
cold compresses, or using a cold shower. If symptoms persist,
contact a physician.
21. Never use the spa when or after taking narcotics or various medications
that may cause drowsiness, depression, increase or decrease your blood
pressure.
22. Never use the spa when or after drinking alcohol. This increases the risk
of drowning.
23. Before using the bath, it is necessary to wash yourself with soap and
wash away common skin bacteria, creams and deodorants. it is ideal
to use classic soap; avoid soaps with ingredients to soften the skin. It
is recommended to take a shower without a swimsuit because soap
residues may remain in the swimsuit, which in turn may cause
foaming of the water.
03 Rules
Suction
Skimmer
VIBES Your daily good vibes
7
24. Make sure the water is always properly maintained and disinfected.
25. Do not enter the spa immediately after treatment with any of the
chemical products. For some of the spa chemical water treatment,
it can take up to 24 hours to fully dissolve and react.
26. Carefully follow these instructions for the maintenance or repair
works of the spa. If you have any questions or doubts, please contact
the service department. Using the spa contrary to the instructions
invalidates the warranties.
27. For your personal safety, we recommend to have some of the
emergency telephone numbers listed near the telephone in use:
physician, emergency room, hospital, police, fire brigade.
28. Keep these instructions carefully.
3.1 Warning for the use of the cover
• Do not step on the cover, its construction is not adapted to support
the weight of a person nor a child.
• Use plastic locks to minimize the risk of drowning and to secure the
cover against strong winds.
• When handling the cover, watch out for children and pets, there is a
risk of injury.
• Remove water from its surface before opening the cover, which
represents a risk of drowing for children.
• Before entering the spa, remove the entire cover. A partially opened
cover leaves risk for persons being trapped underneath.
• Failure to follow instructions may result in an injury or drowning.
• The cover is not a safety cover.
• Protect the cover from radiant heat sources, there is a risk of damage
to its components and fire.
• The mechanism is designed for use at a maximum wind speed of up
to 10 m/s.
03 Rules
8
VIBES Your daily good vibes
04 General requirements before
putting the spa into service
It is recommended that the installation and regular maintenance of the
spa is carried out by a qualified service technician!
4.1 General requirements of the spa installation
1. Due to the great weight of the spa, it is necessary to provide a flat,
horizontal and sufficiently firm foundation (e.g. a 10-15 cm thick slab
of reinforced concrete). Any defects or damage caused by improper
foundation are not covered by the warranty.
2. In case of embedded or partially embedded installation, consultation
with the spa supplier and respecting the requirements for construction
readiness is necessary.
3. In the case of installation on a balcony or roof terrace, consultation with
a professional structural and civil engineer is required.
4. In all cases, it is advisable to provide for water drainage in case of an
accident so as to avoid flooding the electrical equipment of your spa.
4.2 General requirements for installation
1. Outdoors – it is recommended to install the spa near the house for
easy access to and from the spa. It is advisable to have an easy and
always free access route. Do not forget to allow for a suitable place
for putting the cover aside (the cover is susceptible to damage when
used improperly). A spa installed in a sheltered place has lower power
consumption demands; any installation under trees increases demands
on cover maintenance (pollen, bark, pitch or droppings falling down);
any installation in direct sunlight may have negative impacts on the
service life of the spa’s external parts.
2. Indoors – it is not recommended to install the spa adjacent to a wall;
the ideal installation is when the spa can be walked around (and any
spilled water wiped up). Do not forget to allow for a suitable place
for putting the cover aside (the cover is susceptible to damage when
used improperly). The flooring material must be suitable for wet
environments and a floor drain must be provided in the room in case of
an accident. Ensure adequate ventilation of the room where the spa is
installed as water evaporates increasingly during spa operation.
04 General requirements
VIBES Your daily good vibes
9
4.3 General requirements for the electrical
connection of the spa
1. All spa installations require a separate circuit with current protective
switches I∆n = 0.03 A, to which no other devices are connected.
2. As a standard, all spa installations work under a voltage of 230 V,
and require a 25 A grounded outlet at a minimum distance of 1,5 m
from the spa installation. Alternatively, all spas can be connected
to 400 V (a three-phase connection).
05 Connection of the spa
5.1 Disassembly and assembly
of the cabinet panel
To access the technological area of the VIBES spa (power cable connection,
service, etc.) it is necessary to remove the front panel of the cabinet with
VIBES logo.
All interventions into the technology must only be carried out by a qualified
service technician!.
Disassembly procedure:
1. Unlock the cover lock and untie the straps of the cover so that you can
access the screws located in the corners of the cabinet.
2. Carefully unscrew and remove the left and right corners of the front
panel. The corners are always fastened with 2 screws (at the top and
bottom).
3. Remove the panel. The panel of the cabinet is inserted under the lip of
the spa and at the bottom placed on the securing bracket („L“ profile). To
remove the panel, first lift the panel up under the lip and tilt the bottom
of the panel toward you. Then carefully slide the panel downwards.
When reassembling the cabinet panel, reverse the disassembly procedure.
Watch the video on how to
assembly and disassembly the cabinet panel
05 Connection of the spa
10
VIBES Your daily good vibes
5.2 Electrical wiring
Warning:
Disconnect power before starting electrical work. Wiring must be
completed by a qualified electrician and must be done in accordance
with the local electrical code.
The IN.YE 5 switchboard must always be connected to a separate circuit
breaker protected by a RCD, supply current not exceeding 30 mA, see
points in chapter 4.3 on page 11.
Always check local standards and regulations for the wiring of electrical
equipment before installation.
The original Gecko documentation with full details is available
at http://www.geckodocs.com/
The technology of VIBES models is equipped with the Gecko YE-5 series
switchboard, which are characterized by a long list of technical features.
Each of them brings advanced solutions that are available to all spa
owners.
The switchboard is equipped with a high-performance 3 kW heat.wav
heater with in.flo protection against dry running.
VIBES models can be equipped with two types of Gecko YE-5 switchboards.
The Identification of the switchboard type is carried out using the ID
NUMBER, which is located on the label of the switchboard cover.
ID NUMBER
ID NUMBER 0610-221045-338:
Gecko YE-5-CE switchboard V2 with separate IN.MIX unit for LED lighting
control.
ID NUMBER 0610-221107-633:
Gecko YE-5-CE switchboard V3 with integrated IN.MIX functions for LED
lighting control.
The wiring of both types of switchboards is different. However, the
functions and controls are the same. The wiring of both versions is
described in separate chapters. The chapters that do not mention the
type of switchboard are common to both versions.
5.2.1 Connection of Gecko YE-5; ID NUMBER 0610-221045-338
The following describes the wiring of the Gecko YE-5-CE switchboard; ID
NUMBER 0610-221045-338 with integrated IN.MIX functions for LED lighting
control.
05 Connection of the spa
Table of contents
Popular Bathtub manuals by other brands
Lyons
Lyons Elite ETLxx663219 Series manual
Woodbridge
Woodbridge BJ500 Installation and care guide
Whirlpool
Whirlpool Ariel ARL-702 installation manual
TEIKO
TEIKO EXCELLENT DUO user manual
American Standard
American Standard Colony 5-1/2' x 32" Specification sheet
American Standard
American Standard 3052OD.X0X Installation instructions and owner's manual
