urmet domus IPerCom 1160/3 System manual
DS 1160-007 LBT 20493
Mod.
1160
CITOFONO VIVAVOCE IP
IP HAND-FREE DOOR PHONE
INTERPHONE MAINS-LIBRES IP
INTERFONO MANOS LIBRES IP
SPRECHANLAGE MIT FREISPRECHSYSTEM IP
IP HANDSFREE DEURTELEFOON
Sch./Ref.1160/3
LIBRETTO DI INSTALLAZIONE
INSTALLATION HANDBOOK
NOTICE D’INSTALLATION
MANUAL DE INSTALACIÓN
INSTALLATIONSANLEITUNG
INSTALLATIEHANDLEIDING
6DS1160-007
ENGLISH
The Ref. 1160/3 is an IP device dedicated to the Ipercom system.
For trouble-free operation, the device requires a LAN/POE-type connection.
DESCRIPTION OF COMPONENTS
1
2
1. Ipercom LAN connector with POE power supply (DOORPHONE POE PORT)
2. 12-way connector for connecting the door phone to optional devices for obtaining the following
functions:
• panic alarm
• call repetition
• floor call
• Yokis device activation.
WIRE DESCRIPTION FOR SYSTEM CONNECTIONS
Colour Name Description
Yellow PANIC Panic alarm
Green X1 Button
Blue GT Button common and
White Y1 Button
Grey - Not used
Colour Name Description
Grey - Not used
Brown S- Call repetition
Orange S+
Purple FC Floor call
7
DS1160-007
WIRING INSTRUCTIONS
RJ45 Ethernet Cable
The Ipercom system has been designed to work with the EIA/TIA 568B standard.
Plug the cable into one of the RJ45 connectors with the Urmet logo.
Insert the wire in its guide, according to the provided colour code (Standard T568B).
8
1
Wire
No. Cable colour
1 White-Orange
2 Orange
3 White-Green
4 Blue
Wire
No. Cable colour
5 White-Blue
6 Green
7 White-Brown
8 Brown
Grey sheath
Cut the cables so that they protrude from the guide by about 5 mm, insert the guide in its plug and crimp
with the specially provided tool.
Plug
8
1
~ 5 mm
8
1
Make sure that the grey sheath stays inside the plug.
This type of connection will NOT guarantee double insulation.
INSTALLATION
WITH FLUSH-MOUNTED CASING MOD. 503
Install flush-mounting box at the height indicated in the drawing below.
Fix the bracket to the mounting box.
Box Mod. 503
Metal bracket
1,55 m
n° 2 M3,5 x 19 mm
included
Connect.
Fix the door phone to the bracket.
1
2
•
•
•
8DS1160-007
WITH FLUSH-MOUNTED CASING Ø 60 MM
Install flush-mounting box at the height indicated.
Remove the plastic base from the door phone unit and fix the base to the wall as shown in the drawing here
below.
1,55 m
n° 1 2,9 x 13 mm
countersunk screw
Box Ø 60 mm
n° 1 screw and screw
anchor included
Connect.
Fix the door phone to its plastic base.
1
DISTANCES, SECTIONS CABLES AND TECH SPECS
Type of connection Max distance Min - max cross section
Call to floor level 30 m 0,5 - 1 mm2
Panic Alarm 30 m 0,5 - 1 mm2
Call repeating 30 m 0,5 - 1 mm2
Yokis devices 10 m 0,5 - 1 mm2
LAN 100 m CAT5e (#)
(#) To ensure longest-range door phone operation, the cable must be a class 5e device and the twisted
pairs’ cross section must be AWG24.
The maximum resistance of the individual wires must not exceed 10ohm/100m.
The cable must be up to the following standards:
- EIA/TIA 568-B.2 or EIA/TIA 568-C.2
- EN50288 3-1
- IEC 61156-5
The connection between the door phone and POE switch must be ensured by a single cable without any
extra patch cords.
POE input voltage: ......................................................................................................................... 48-54 V
Max consumption @ 48 V:....................................................................................................................125 mA
Operating Temperature: ...................................................................................................................-5 ÷ 45°C
Maximum current X1/GT or Y1/GT contacts: .........................................................................50 mA - 12 Vdc
9
DS1160-007
Connection of a E2BPP module to the door phone for the centralisation of lights and rollers
SD541-4004
MVR500ER
OFNLBP
Roller
MVR500ER
OFNLBP
ANTENNA
GT
X1
Y1
R1 R1
R1
R1
R1 R1
Roller
Max 10 m
After suitably programming the Yokis devices, it will be possible:
to activate the centralised closing of the rollers with a button (for example: );
a second button (for example: ) will activate the turning off of the lights.
For more information on YOKIS products, please visit www.yokis.com
–
–
DS 1160-007 LBT 20493
Area tecnica
servizio clienti +39 011.23.39.810
http://www.urmet.com
e-mail: [email protected]
MADE IN CHINA
URMET S.p.A.
10154 TORINO (ITALY)
VIA BOLOGNA 188/C
Telef. +39 011.24.00.000 (RIC. AUT.)
Fax +39 011.24.00.300 - 323
Other manuals for IPerCom 1160/3
1
Table of contents
Other urmet domus Intercom System manuals
urmet domus
urmet domus IPerCom VOG 7 1761 Series Installation and operation manual
urmet domus
urmet domus 1083/58A User manual
urmet domus
urmet domus IPerCom VOG 7 1761 Series Installation and operation manual
urmet domus
urmet domus Agora 2 Assembly instructions
urmet domus
urmet domus 1043 User manual
urmet domus
urmet domus Miwi Matibus SE User manual
urmet domus
urmet domus 1145/1 User manual
urmet domus
urmet domus 1130 User manual
urmet domus
urmet domus miro 2VOICE 1750 User manual
urmet domus
urmet domus 1722/86 User manual
urmet domus
urmet domus NOTE 1722/11 User manual
urmet domus
urmet domus FDi ipassan 2VOICE User manual
urmet domus
urmet domus 1150 User manual
urmet domus
urmet domus BiBus II ED. User manual
urmet domus
urmet domus SIGNO 1740 User manual
urmet domus
urmet domus 1133 User manual
urmet domus
urmet domus iPerTAlk 1375 Instruction manual
urmet domus
urmet domus 2voice 1760/15 User manual
urmet domus
urmet domus MT 101-013D User manual
urmet domus
urmet domus Matibus SE User manual
